Table of Contents
In dispersed clay slurries, flocculation occurs after mechanical agitation ceases and the dispersed clay platelets spontaneously form flocs because of attractions between negative face charges and positive edge charges.
What chemical is used for flocculation?
Aluminum sulfate or alum (Al2(SO4)3), ferric chloride (FeCl3) and ferric sulfate (Fe(SO4)3) are the most widely used flocculants [1, 70]. These flocculants have a long history of use in removing colloidal particles from water and wastewater [15, 17].
How can flocculation be prevented?
When particles of a suspension come close together they can form aggregates called flocculates which will settle more rapidly. To prevent that we often coat the particle with a charged surfactant. The charge (Zeta potential) acts to keep the particles separate and prevent flocculation.
What is difference between flocculation and Deflocculation?
The key difference between flocculation and deflocculation is that flocculation is the formation of flocs by the clumping of fine particles, whereas deflocculation is the dispersion of flocs to form a stable colloid. Flocculation refers to the formation of clumps from fine particles in a colloid.
Can you use too much flocculant?
Adding too much flocculant can cause its own issues. Flocculant is aluminum sulfate, which is designed to clump with the particles you’re trying to remove. But if you add too much, the flocculant will start to agglomerate with itself instead of those particles.
What does flocculation not remove?
Suspended particles cannot be removed completely by plain settling. Large, heavy particles settle out readily, but smaller and lighter particles settle very slowly or in some cases do not settle at all. Aluminum sulfate (alum) is the most common coagulant used for water purification.
Is alum a coagulant or flocculant?
To accomplish this, the water is treated with aluminum sulfate, commonly called alum, which serves as a flocculant. Raw water often holds tiny suspended particles that are very difficult for a filter to catch. Alum causes them to clump together so that they can settle out of the water or be easily trapped by a filter.
Will baking soda clear a cloudy pool?
Can You Use Baking Soda to Clear Up a Cloudy Pool? NO! Baking soda is a base and will hugely increase the level of pH, which actually causes the water to turn cloudy. Some people may suggest using baking soda as a quick fix if alkalinity is high, but it is not a reliable pool chemical.
How do I make my pool water crystal clear?
How to Make Your Pool Crystal Clear Again
- Keep Up with pH and Chlorine Levels. Do you have a water testing device in your supply kit?
- Run That Filter. It’s recommended that you run your filter for 8 to 10 hours a day when using your pool.
- Skim, Skim, Skim. Yes, something that simple can be the trick to clear water.
- Shock the Pool Once a Week.
Why does flocculation occur in suspension?
Flocculation in the sulfamerazine suspension system is principally due to the chemical reaction that takes place between dioctyl sodium sulfosuccinate anions and the trivalent cations of the flocculating agent. Relatively strong bonding forces develop between the suspended particles, and floccules are formed.
What is the difference between flocculant and coagulant?
Depending on the charge and chemical composition of your wastewater, flocculants can either be used on their own or in combination with coagulants. Flocculants differ from coagulants in that they are often polymers, whereas coagulants are typically salts.
What does flocculant do to pools?
Pool flocculants, also known as flocc, make quick work of clearing up your cloudy pool water. After being added directly to the pool water floc causes cloudy water particles to clump together and sink to the bottom of your pool. Your job is to then vacuum the clumped up “clouds” from the bottom of the pool and voila!Jun 27, 2018
Does flocculant kill algae?
There are two major chemical treatments for algae: flocculant and chlorine. Flocculant, or floc, is a chemical and mechanical process that works fast but requires work on your part. Then, you must turn it off to give the algae time to settle. If you use chlorine shock, you should run the filter almost continuously.
How fast does flocculant work?
How Long Does It Take to Work? The beauty of flocculants is that they work fast. Your pool can be cleaned in 24 hours, whereas with a clarifier, it takes a few days for the filter to do its job.
Is FeCl3 a coagulant?
Ferric chloride (FeCl3) is the most common iron salt used to achieve coagulation. Its reactions in the coagulation process are similar to those of alum, but its relative solubility and pH range differ significantly from those of alum. Both alum and ferric chloride can be used to generate inorganic polymeric coagulants.
How do you dissolve flocculant?
Bleach or sodium hypochlorite can be used to break down polyacrylamide-based flocculants.
What is the main objective of flocculation process?
Flocculation is a process by which a chemical coagulant added to the water acts to facilitate bonding between particles, creating larger aggregates which are easier to separate. The method is widely used in water treatment plants and can also be applied to sample processing for monitoring applications.
How does a flocculant work?
A flocculant is a chemical that can be added to the water to help colloids and any other suspended solids bind together and form heavier particles. The heavier particles then settle to the bottom of the container/tank and the water on the top is drained off.
Can you drink flocculant?
In addition, coagulants and flocculants are expensive, which is why you want to avoid adding more than are necessary to the water; drinking water treatment plants use “jar tests” to identify the optimal coagulant and flocculant concentrations. Do not drink any of your water samples—even if they appear clear.
Does flocculant affect pH?
Because flocculants can affect the pH level, you’ll want to start out with it at about 7.0 so you can make sure your sanitizer keeps working at maximum efficiency.
How is flocculation used in everyday life?
Flocculation: Particles that aggregate by the use of polymers that binds them together. They are typically used for treatment of wastewater containing colloids (suspended particles) and metal ions. But the phenomena are also well-known from everyday life – especially coagulation. A good example is sour milk.
What can be used as a flocculant?
The following natural products are used as flocculants:
- Chitosan.
- Isinglass.
- Moringa oleifera seeds (Horseradish Tree)
- Gelatin.
- Strychnos potatorum seeds (Nirmali nut tree)
- Guar gum.
- Alginates (brown seaweed extracts)
