Table of Contents
BOD directly affects the amount of dissolved oxygen in rivers and streams. Sources of BOD include leaves and woody debris; dead plants and animals; animal manure; effluents from pulp and paper mills, wastewater treatment plants, feedlots, and food-processing plants; failing septic systems; and urban stormwater runoff.
What causes high BOD levels in wastewater?
IMPORTANCE OF BOD FOR WASTEWATER The higher the BOD value, the greater the amount of organic matter or “food” available for oxygen consuming bacteria. If the rate of DO consumption by bacteria exceeds the supply of DO from aquatic plants, algae photosynthesis or diffusing from air, unfavourable conditions occur.
What increases BOD in an aquatic environment?
Sources: BOD represents the amount of organic matter in a water supply; therefore, it increases when decaying plants, human or animal waste, and other organic compounds are added to water.
What happens if BOD is high?
The greater the BOD, the more rapidly oxygen is depleted in the stream. This means less oxygen is available to higher forms of aquatic life. The consequences of high BOD are the same as those for low dissolved oxygen: aquatic organisms become stressed, suffocate, and die.
Is high BOD in water good?
Higher BOD indicates more oxygen is required, which is less for oxygen-demanding species to feed on, and signifies lower water quality. Inversely, low BOD means less oxygen is being removed from water, so water is generally purer.
In which water BOD is maximum?
Notes: BOD is amount of dissolved oxygen needed by aerobic biological organisms in a body of water to break down organic material present in a given water sample at certain temperature over a specific time period, for running rivers, it would be minimum and for Untreated Municipal waste water it would be maximum.
How do you treat high BOD water?
These are the best practices for reducing BOD and TSS that facility managers should know: Focus on removing TSS from wastewater first. Get a properly sized EQ tank. Control the pH of the waste stream. Install a modern plate pack DAF made of stainless steel or plastic. Use a regenerative turbine air dissolution pump.
What is BOD COD and do?
The biochemical oxygen demand (BOD) represents the amount of dissolved oxygen (DO) consumed by biological organisms when they decompose organic matter in water. The chemical oxygen demand (COD) is the amount of oxygen consumed when the water sample is chemically oxidised.
What does COD mean in wastewater?
5 Chemical oxygen demand (COD) The COD is the estimate of oxygen required for the portion of organic matter in wastewater that is subjected to oxidation and also the amount of oxygen consumed by organic matter from boiling acid potassium dichromate solution.
Why is BOD done for 5 days?
The standard oxidation (or incubation) test period for BOD is 5 days at 20 degrees Celsius (°C) (BOD5). The BOD5 value has been used and reported for many applications, most commonly to indicate the effects of sewage and other organic wastes on dissolved oxygen in surface waters (see TECHNICAL NOTE).
What is BOD COD ratio?
BOD (Biochemical oxygen demand) is the pollution index of any water sample. BOD : COD (Chemical oxygen demand) ratio using the formulated seed comes in the range of 0.7-0.8 whereas that using BODSEED comes in the ratio of 0.5-0.6. The ultimate BOD (UBOD) was also performed by exceeding the 3-day dilution BOD test.
What is a good BOD level?
A BOD level of 1-2 ppm is considered very good. There will not be much organic waste present in the water supply. A water supply with a BOD level of 3-5 ppm is considered moderately clean.
How do you reduce BOD COD wastewater?
You can reduce COD and BOD by adding hydrogen peroxide to the wastewater solution. The hydrogen peroxide will chemically attack the organics in the wastewater, degrading them and reducing the measured COD and BOD.
What is BOD value of water?
Biochemical oxygen demand (BOD) is the amount of dissolved oxygen (DO) needed (i.e. demanded) by aerobic biological organisms to break down organic material present in a given water sample at certain temperature over a specific time period.
What is BOD Toppr?
Biochemical oxygen demand (BOD) is the amount of dissolved oxygen needed by aerobic biological organisms in a body of water to break down organic material present in a given water sample at certain temperature over a specific time period.
Which value of BOD is correct for average sewage?
BOD values are usually reported in either ppm values or in mg/L values. Unpolluted rivers typically have a BOD below 1 mg/L. Moderately polluted rivers vary between 2 to 8 mg/L. Untreated sewage averages between 200 and 600 mg/L while efficiently treated municipal sewage would be 20 mg/L or less.
Why is COD higher than BOD?
COD is normally higher than BOD because more organic compounds can be chemically oxidised than biologically oxidised. This includes chemicals toxic to biological life, which can make COD tests very useful when testing industrial sewage as they will not be captured by BOD testing.
What affects BOD?
Biological oxygen demand directly affects the amount of dissolved oxygen in rivers and streams. The rate of oxygen consumption is affected by a number of variables: temperature, pH, the presence of certain kinds of microorganisms, and the type of organic and inorganic material in the water.
How does BOD increase?
The more organic matter there is (e.g., in sewage and polluted bodies of water), the greater the BOD; and the greater the BOD, the lower the amount of dissolved oxygen available for higher animals such as fishes.
How do you treat COD in wastewater?
One way to reduce COD in water is to use coagulants and flocculants to bind sludge together. Once they are bound into big enough masses that they can be easily filtered out and deposited into a sedimentation tank for removal. This method does however rely on the use of chemicals, and requires high reoccurring cost.
How can I reduce my BOD?
BOD is fairly easy to remove from sewage by providing a supply of oxygen during the treatment process; the oxygen supports bacterial growth which breaks down the organic BOD. Most enhanced treatment units described incorporate some type of unit which actively oxygenates the sewage to reduce BOD.
Does BOD increase with temperature?
The amount of oxygen that can dissolve in water (DO) depends on temperature. Also, warmer water usually will have a higher BOD level than colder water. As water temperature increases, the rate of photosynthesis by algae and other plant life in the water also increases.
