Table of Contents
If the faucet leaks, the culprits are usually the inlet and outlet seals. When repairing a disc faucet, the handle should be on in the on position.
Why is my ceramic disc tap leaking?
Ceramic disc taps feature a cartridge within the tap that contain a pair of ceramic discs. If you do experience dripping this is usually caused by a scratched ceramic disc. In order to rectify the leak you must replace the entire cartridge as follows.
How do I fix a dripping ceramic faucet?
How to Fix a Leaky Faucet: Ceramic Disk Type 2Loosen the setscrew with the hex wrench, and remove the handle. 3Lift off the decorative cap. 4Loosen the cartridge. 5Lift off the cartridge. 6Remove the seals on the bottom of the cartridge. 8Remove the O-ring from the faucet. 9Coat the O-ring with silicone grease.
How long do ceramic disc taps last?
How Long Do Ceramic Disc Cartridges Last? A lifetime. But it depends on the hardness of your water (contact your water provider), and the quality of the tap itself. A cheap tap, even with ceramic discs, is going to wear down over time.
Why does my tap drip after I turn it off?
The faucet valve (working parts) is housed in the handle and controls the on/off, volume, and temperature control. Over time, a faucet valve can lose its ability to make a water-tight seal, so water will drip out even in the off position.
Can ceramic tap washers be replaced?
Remove the retaining washer and tap it on the kitchen or bathroom surface. With any luck, the ceramic disc cartridge will fall out of the valve body. You can replace the actual discs themselves though this is a far more precise, specialist task.
How does a ceramic faucet cartridge work?
A ceramic cartridge has three main parts: the ceramic discs, a stem, and a housing or case. The stem is attached to the faucet handle on one end, and to one of the ceramic discs on the other. Moving the handle to operate the faucet moves the stem which operates the “movable” disc.
How do I know what cartridge my faucet is?
Use a caliper or ruler and measure the cartridge. Do this by measuring from the base to the tip (from seat to splines). Pay attention to the length tier of your cartridge (Lengths range from 1–12). Next, identify the broach pattern with the broach chart (see page B-5).
Do ceramic disc taps wear out?
Ceramic disc taps are designed to last a lifetime. Unfortunately, in hard water areas they do not and it is as well to know how they operate and how to service them. It is very rare for the ceramic discs to wear out and the need to replace them is even rarer.
Do ceramic taps wear out?
Occasionally, they do wear out, causing dripping and leaking. The reason for this is hard water which is full of minerals, harmful for all household appliances that use it. When the ceramics wear out, the whole cartridge has to be replaced, not only the discs.
How long should a tap valve last?
Given the ever-improving quality of taps, modern tap designs can be expected to last between 15 and 20 years typically.
How do you descale a tap cartridge?
Soak the cartridge in the water and vinegar mix for around 10 minutes. If when you take it out, the cartridge still has limescale on it, it simply needs to be soaked for longer. Add a little more vinegar to the mixture, soak a cloth in it and wrap it tightly around the cartridge.
How do I stop my kitchen tap from dripping?
Replace tap washer A damaged or loosened tap washer is likely to be the reason you have a dripping tap. All you need to do to replace it is unscrew or slide off the original washer and screw or slide on a new one. Make sure it is tight and an exact fit for your tap.
Are ceramic tap washers better?
In place of the traditional washer, two ceramic discs are used, one of which is fixed, the other being turned by the levers. The tap only needs a 90-degree rotation, which aligns these two discs, allowing the water to flow. From a long-term maintenance point of view, ceramic disc taps are much better than normal taps.
How do you fix a dripping basin on a mixer tap?
How to Fix a Leaking Mixer Tap Turn Off Your Water Supply. Remove Plastic Cap/Cover. Remove the Grub Screw & Handle. Remove Chrome Dress Ring & Retaining Nut. Replace the Cartridge. Reassemble the Mixer & Turn On Water Supply.
How do you descale a shower valve?
Remove handle and trim piece from the front of the valve body. With channel lock pliers, unthread the cartridge and remove from the valve body. Soak the cartridge in white vinegar for an hour. Remove and rinse thoroughly with water.
How do you remove limescale from a mixer tap?
If the limescale is very hard, you should give the aerator a thorough clean. Many BLANCO mixer taps allow you to simply unscrew the small nozzle anti-clockwise. You can then steep the jet regulator in vinegar water or citric acid overnight.
How do you remove limescale from inside taps?
White Vinegar and warm water – areas of limescale on your tap can be cleaned with a solution of equal parts white vinegar and warm water. Depending on how stubborn the limescale is you may only need to wipe the tap over with the solution or you may need to lay a cloth to soak on it for a few hours.
How does a shower faucet cartridge work?
A shower cartridge works because it’s connected to the handle. When you pull the handle to turn on the water and adjust the temperature, the cartridge slides forward, allow hot and cold water to mingle and flow together towards the shower head.
