Table of Contents
Quickly and easily dissolves and removes tough calcium and lime deposits. Can be used on surface rust stains from bathtubs, toilet bowls, sinks, glass, chrome, fiberglass, stainless steel, humidifiers, dishwashers, washing machines and showerheads.
Do you have to rinse off CLR?
Don’t leave CLR for longer than two minutes. Always rinse away with cool water after two minutes of contact.
Will CLR ruin stainless steel?
CLR Spot-Free Stainless Steel is specially formulated to be used safely on any stainless steel appliance and surface.
Can you use CLR on material?
No, CLR should never be used on clothing. Please find an appropriate stain remover or laundry detergent. If CLR is spilled on fabric, you must rinse immediately.
Is CLR good for cleaning metal?
CLR — a calcium, lime and rust remover — can dissolve most rust from metal surfaces. After cleaning, keep the metal clean and dry, or apply a rust protector to prevent rust in the future.
Do you mix CLR with water?
CLR can be mixed with warm water, 1 of three ways depending on the stain. For light stains and buildup, a diluted mixture is recommended. Diluted 1 part CLR to 8 parts warm water, 50/50 with warm water and full strength.
Can I leave CLR in my toilet overnight?
It is important to not let CLR sit on the bowl for longer than two minutes, as it can cause damage to the porcelain finish. If the stains in your toilet bowl sit below the water line, then you’ll have to empty the toilet water.
Can you clean toilet with CLR?
Apply CLR Calcium, Lime & Rust Remover directly to the stains and scrub with the brush or pumice stone. Wait for 2 minutes then flush the toilet. Repeat this process as needed until the hard water stains begin to be removed.
Can I use CLR in my toilet bowl?
How To Over time your toilet water can cause an unsightly rainbow of stains and mineral build up in your toilet bowl. CLR® Calcium, Lime & Rust Remover helps you flush the filth away.
Can you pour CLR down the drain?
Plumber in a Can CLR Clog-Free Drain clears almost all household clogged or sluggish drains in seconds! It is safe to use on all sound plumbing and works on almost any clog including hair, grease, food, soap build-up and more.
How do you clean floors with CLR?
Test on a small hidden area before use especially: carpet, fabrics, plastics and fiberglass. Saturate stain and allow CLR® Stain-Free Carpet, Floor and Fabric Cleaner to penetrate the stain for 10 minutes. Blot thoroughly with a dry clean cloth until area is dry.
How do I clean my shower with CLR?
Step 1: On a dry shower screen surface, spray CLR Bathroom and Kitchen directly onto your stains. Step 2: Let CLR Bathroom and Kitchen sit for up to 2-3 minutes to allow CLR to actively dissolve the stains. Step 3: Wipe your shower screen clean with a damp cloth. Step 4: Rinse thoroughly.
What does CLR do to clothes?
CLR will work. CLR Calcium, Lime, and Rust Remover) is a product that is surprisingly gentle and effective at removing things like rust stains. Simply soak the stained cotton fabric in some CLR for a few minutes, and then remove. Once you have removed the stained fabric from the CLR wash it as you normally would.
Can I use CLR in my coffee maker?
Mix one part (ex: 1 cup) CLR Calcium, Lime and Rust Remover to eight parts (ex: 8 cups) water (for 10-12 cup automatic drip coffee makers). Run through coffee maker as if making coffee. Always read your coffee maker’s manufacturer’s directions before using CLR Calcium, Lime and Rust to make sure product is compatible.
Can I use CLR on my kitchen sink?
The sign of a truly spotless kitchen is a glimmering kitchen sink. CLR® Bath & Kitchen Cleaner can give you that spotless kitchen because it’s the best way to clean a stainless steel sink.
Does CLR disinfect?
Disinfectants are NOT cleaners. So what is the difference? Cleaning is done with water and a cleaning product, like CLR® Brilliant Bath. Cleaning does not kill germs, but it does remove germs, dirt, and other organic material where they hide by washing them down the drain.
Can you use CLR on shower heads?
When mineral-rich water, or hard water, evaporates, it leaves behind deposits of calcium and magnesium. Thankfully, there’s CLR® Calcium, Lime & Rust Remover to quickly and safely give you a clean showerhead once again.
Can CLR be used on shower glass?
Yes. Our CLR Bathroom & Kitchen is safe and effective on the glass only (avoid any contact with the frame, trim or track of the door, as these are usually made of aluminium)part of a shower door.
How long should CLR sit?
Test on a hidden area before applying to the entire surface and apply directly to the stain with a brush, cloth, or sponge and let soak for 2 minutes. Rinse promptly with cold water. Never leave CLR on an area for longer than two minutes or mix with other household cleaners or bleach.
Does CLR remove hard water stains?
CLR cleans what many household products can’t. It dissolves and removes tough stains from the build-up of calcium, limescale and surface rust from hard water.
What causes brown stains in toilet bowl?
If you get brown stains in your toilet bowl, the good news is that it’s not caused by anything that you, ahem, do in the bathroom. It’s actually due to high concentrations of minerals in hard water, like calcium, iron, and manganese, that build up inside the toilet bowl over time, according to Hunker.
