Table of Contents
Using a cloth moistened with whiteboard cleaner is enough to keep a board clean if used every week. Warm soapy water, window cleaner and peroxide all work well too. Be sure to stay away from wax-based cleaners as they leave a pesky film on the whiteboard.
What is the best cleaner for dry erase boards?
Isopropyl alcohol, often referred to as rubbing alcohol, and hydrogen peroxide are very effective ways to clean whiteboards. They are especially effective at getting rid of ghosting caused by chemical build up residue from whiteboard markers. For best results, use 99% or 90% isopropyl alcohol.
Can you use Windex on a dry erase board?
Use water or common household glass cleaners. Can you use Windex® to clean a dry erase board? Yes, products such as Windex® are recommended for cleaning a whiteboard. Never use scouring pads or abrasive cleaners, as those can ruin the dry erase surface and allow ink penetration.
Do Clorox wipes ruin dry erase boards?
Do not use glass cleaner, Clorox® wipes, or all-purpose cleaners as they will damage the whiteboard surface and void the warranty. The surface should be cleaned only with dry erase wipes, liquid board cleaner, or a damp wet cloth. Abrasives or other chemical cleansers should not be used.
What is the easiest way to clean a dry erase board?
Rubbing alcohol, hand sanitizer, nail polish remover containing acetone, vinegar, and Windex are all safe to use on a whiteboard. To clean the whiteboard, dampen a cloth and use it to rub in the cleaning product of your choice. Rinse the cloth with cold water and use it to rinse off any remaining cleaning solution.
How do you make homemade whiteboard cleaner?
Simply mix one part water and one part alcohol in a spray bottle, squirt some on the board and rinse with a soft, damp cloth. If you need a little extra cleaning power, use the alcohol at full potency rather than diluting it with water.
How do you clean permanent marker off a whiteboard?
If someone has accidentally used a permanent marker on your board, just follow these steps: Use a fresh dry erase marker to write over top of the stains, covering them completely. Wait a few seconds for the marker to dry. Wipe away all marks with a cloth or felt eraser. The dry erase ink will lift away the permanent ink.
Can you use Goo Gone on a whiteboard?
Tips To Make Your Dry Erase Board Last Always use a soft, non-abrasive cloth to remove ink, such as a microfiber cloth. If your whiteboard is used daily, it should be cleaned daily. Goo Gone is a great way to remove dry erase markers, but not wet erase markers.
Can you clean a chalkboard with Windex?
Windex. Windex is perfect for removing liquid chalk. All you need to do is spray some Windex onto your board and let it sit for a period of time before wiping it off with a soft cloth. If you can still see writing after the first run, repeat the process and it should be off in no time.
Does Windex remove dry erase marker?
Can you use Windex on a dry erase board? Yes you can. Just do not use anything abrasive that might scratch the board to wipe the cleaner.
Can you use Lysol to clean whiteboard?
You should also know that there are a few solutions that you should NOT use on a whiteboard or dry erase board. Window cleaners (even our homemade window cleaner!), and Clorox, Lysol, or other disinfecting wipes could strip the finish on the board.
Can you use bleach on a dry erase board?
Whiteboard Cleaning and Care: Clean your cloths on a regular basis. A dirty cloth will leave ink residue on your writing surface. (Everase® Micro-Fiber Eraser Cloths are machine washable with regular detergent. No bleach.).
What is in magic eraser?
The truth is, Magic Erasers are just tiny rectangular pieces of melamine foam with a cleaning agent inside. A melamine sponge is more dense than your average cleaning sponge and its tiny pores make it a light abrasive, not unlike that of an extra fine sheet of sandpaper.
What is in Expo dry erase cleaner?
Ingredient Information Deionized Water. Function : Universal solvent. 1-Butoxy-2-Propanol. Function : Coupling agent/solvent. PPG-2 Methyl Ether. Function : Coupling agent/solvent. Methylisothiazolinone. Function : Biocide. Sodium Carbonate. Function : pH adjuster. C12-15 Pareth-4. Function : Surfactant. Download SDS.
Will vinegar remove dry erase marker?
Vinegar can also be used to remove permanent marker from dry erase boards. Use a simple solution of equal parts water and vinegar and wipe with a clean cloth or paper towel.
What is the active ingredient in whiteboard cleaner?
Water (CAS# 7732-18-5), Denatured alcohol (CAS# 64-17-5), Cocamidopropyl betaine (CAS# 61789-40-0), Potassium sorbate (CAS# 579-00-1), Citric acid (CAS# 77-92-9).
How do you clean a white board with vinegar?
Make a solution of 1 teaspoon of white vinegar to every 1 cup of water. Put it either in your spray bottle or bowl. Either dampen the cloth from the bowl and wipe down the board, or spray the solution directly onto the board, and use the cloth to spread it around and wipe it down.
How do you restore a whiteboard that won’t erase?
To fix both of these problems, put some isopropyl alcohol on a paper towel, and wipe down the entire board. Switch paper towels as it starts getting dry or as it fills up with stains. Repeat as necessary until the entire whiteboard feels smooth to the touch.
Why does my whiteboard not erase?
When whiteboard erasers become overloaded with ink, they can no longer erase efficiently. Nearly all of the dry ink particles can be removed from the felt in your eraser by simply brushing it off with a soft-bristled hairbrush or baby brush that you don’t mind getting stained with ink dust.
