Table of Contents
Brite Tone – If you want ONE item to use instead of epoxy, this would be it. You want to use Brite tone on every single cup. It is the best quality top coat they have that once it is cured, is shinier and more durable than epoxy!.
What is an alternative to epoxy?
Hard plaster and concrete are excellent epoxy resin alternatives, and their use is not limited to small surfaces only. Unlike epoxy resin, concrete and plaster can be easily applied to large surfaces as well. Other great alternatives to epoxy resin include slush latex, metal, plastic, and alabaster.
Do you have to use epoxy on tumblers?
If you’re making tumblers, you need to be sure that the epoxy resin you’re using is food safe after it’s cured and becomes an inert plastic. There’s a lot of different epoxies out there and not all are food safe.
Is Mod Podge the same as epoxy?
6-Mod Podge Super Thick Gloss: As the name says super thick gloss, with this you cannot glue down your projects, its simple purpose is to provide Super Gloss, smooth, epoxy-like finish over your projects. So it gives you a very shiny, clear finish that looks like epoxy.
Can you seal glitter without epoxy?
Use hairspray. Hairspray is a fantastic option for sealing glitter on fabric! Not only is it an item you most likely already have around the house, but it is so easy to spray your item and go.
What is a safer alternative to epoxy resin?
In general, epoxy resin is generally a safe, non-toxic product to use. Although epoxy resins are considered toxic in the liquid state, they are completely safe after the curing process. Common alternatives to epoxy resin are slush latex, resin glue, polyester resin, concrete, plaster, and acrylic resin.
What is the difference between resin and epoxy?
Epoxy coating resin has a more viscous consistency as compared to casting resin. It dries or cures faster than casting resin. Compared to casting resin, epoxy coating resin has relatively shorter processing times. Epoxy coating is more resistant to mechanical influence as compared to casting resin.
Is there a natural alternative to epoxy resin?
EcoPoxy resin is a plant-based alternative to epoxy resin that is great for crafting with. It is certified as a BioPreferred Product by the USDA.
Do you need to seal permanent vinyl on tumblers?
I do not seal my vinyl on tumblers. Most vinyl manufacturers actually recommend that you don’t apply a sealer over the vinyl. The exception to this would be if you want to go through the process of sealing your tumbler with epoxy. This is usually done with glitter tumblers.
What kind of epoxy is used for tumblers?
1. ENVIROTEX LITE EPOXY RESIN For Tumblers. Envirotex Lite is a brand of epoxy resin you can use for tumblers, whose claim to fame is that it is a pour-on, high gloss finish. It cures to a thick, glossy coating in about 8 hours at 70F, and reaches full cure in about 48 hours.
What do you seal glitter tumblers with?
Seal glitter on the tumbler with a gloss clear spray sealer or brush on mod podge. Allow tumbler to dry. 5.
How many coats of epoxy does a tumbler need?
It does depend on what you’re creating, but the average is 2-3 coats. To properly seal all the layers beneath, we recommend using a topcoat of your resin. For a sparkling finish, you can mix in glitter from our friends at Alumilite to realize your epoxy glitter tumbler vision.
Do you have to sand between coats of epoxy on tumbler?
????TIP: Remember: whenever your resin is dry, you need to sand before you apply a second coat to ensure the two layers bond together. If you don’t sand, you run the risk of the two layers eventually delaminating.
How long do you turn epoxy tumbler?
Once the entire surface has been evenly covered, allow it to turn until it is dry to the touch, within 18-24 hours. Once dry, remove the tape and allow it to finish curing. At 72 hours, it will have fully cured.
Is glossy or matte Mod Podge better?
What is the difference between Mod Podge Gloss, Matte, and Satin? In terms of how they operate and being glues, sealers, and finishes – they are all the same. The ONLY difference is the sheen.
Can you use Mod Podge on top of resin?
Cover the curing resin so dust does not ruin the finish. Use an inverted box for multiple items or cups for individual items, leaving space for air to circulate. To prevent discoloration, seal both sides and edges of the image with Mod Podge® or Elmer’s® Glue-All®. Let adhesive dry completely before adding resin.
How do you seal with epoxy?
Sand the project. Remove all dust from the project with tack cloth. Place newspapers or a drop cloth underneath the project. Pour epoxy resin and hardener into a clean coffee can. Apply epoxy using a bristle brush. Check for runs or dry spots as you paint. Allow project to cure for 24 hours in a dust-free room.
Can you spray clear coat over glitter?
Any brand of clear gloss spray paint will work. Rustoleum, Krylon, etc. Do 4-6 coats to maximize coverage to stop the shedding.
What can I put over glitter to stay?
Apply a top layer of Mod Podge to seal in the glitter. You could also use watered down school glue to create an opaque sealant for your crafting project. The top layer of Mod Podge acts as a sealant and will prevent the glitter from flaking away.
What is the safest epoxy resin to use?
ArtResin is the most popular brand of clear epoxy resin used by resin artists worldwide. ArtResin is ASTM certified (D-4236) non-toxic, non-hazardous, non-flammable, as there are no VOCs / fumes produced.
What is the safest resin to use?
And now, ArtResin has been recognized by the American Society for Testing and Materials (ASTM) as meeting safety standard D-4236: Safe for Home Use. Comparatively, most epoxy resin products on the market are classified as a hazardous material.
Is epoxy resin toxic to breathe?
Breathing highly concentrated epoxy vapor can irritate the respiratory system and cause sensitization. When you inhale these dust particles, they become trapped in the mucous lining of your respiratory system. The reactive material can cause severe respiratory irritation and/or respiratory allergies.
Which is better resin or epoxy?
When it comes to forming strong bonds, both epoxy and resin glue can be strong, but epoxy is stronger. The main difference between both adhesive types is the drying time. Both epoxy and resin adhesives require mixing before use, but epoxy hardens much faster than resin glue.
What is the hardest epoxy resin?
MAX GFE is a two-component epoxy based resin that exhibits very high tensile strength properties. It is filled with milled fiberglass and the vacuum processed to remove any entrapped or incorporated air bubbles.
Why is casting resin so expensive?
Epoxy resins are more expensive to produce than other types of resins. This is because the raw materials required for manufacture cost a lot more than other low-end resins and the process of the production is complicated with a low tolerance for errors.
Can you seal a tumbler without epoxy?
Make sure to remove the tape before the Mod Podge dries! There you have it! A way to make a decorated Yeti cup or Ozark tumbler without having to use epoxy. As you can see from the pictures, it’s not as smooth as epoxy but it still works and actually has a nice texture to it!.
What is an alternative to epoxy?
Hard plaster and concrete are excellent epoxy resin alternatives, and their use is not limited to small surfaces only. Unlike epoxy resin, concrete and plaster can be easily applied to large surfaces as well. Other great alternatives to epoxy resin include slush latex, metal, plastic, and alabaster.
Is Mod Podge the same as epoxy?
6-Mod Podge Super Thick Gloss: As the name says super thick gloss, with this you cannot glue down your projects, its simple purpose is to provide Super Gloss, smooth, epoxy-like finish over your projects. So it gives you a very shiny, clear finish that looks like epoxy.
How do you seal a tumbler with epoxy?
Instructions Wash tumbler. Apply tape to top (and bottom – optional). Spray paint the tumbler if needed. Let dry. Apply a layer of mod podge with long even strokes. Dump glitter all over while you are turning the tumbler so the mod podge is all covered. Remove tape. Let dry fully (over night). Time to epoxy.
How many coats of epoxy does a tumbler need?
It does depend on what you’re creating, but the average is 2-3 coats. To properly seal all the layers beneath, we recommend using a topcoat of your resin. For a sparkling finish, you can mix in glitter from our friends at Alumilite to realize your epoxy glitter tumbler vision.
How do you seal glitter on glass without epoxy?
How to Seal Glitter with Mod Podge Before you begin, tap off any excess glitter. Apply a coat of decoupage medium to the project with a foam brush. Allow to dry. Apply a second coat of decoupage medium to the project. Wait 24 hours, and your glitter is sealed!.
What kind of epoxy is used for tumblers?
1. ENVIROTEX LITE EPOXY RESIN For Tumblers. Envirotex Lite is a brand of epoxy resin you can use for tumblers, whose claim to fame is that it is a pour-on, high gloss finish. It cures to a thick, glossy coating in about 8 hours at 70F, and reaches full cure in about 48 hours.
What is a safer alternative to epoxy resin?
In general, epoxy resin is generally a safe, non-toxic product to use. Although epoxy resins are considered toxic in the liquid state, they are completely safe after the curing process. Common alternatives to epoxy resin are slush latex, resin glue, polyester resin, concrete, plaster, and acrylic resin.
What is the difference between resin and epoxy?
Epoxy coating resin has a more viscous consistency as compared to casting resin. It dries or cures faster than casting resin. Compared to casting resin, epoxy coating resin has relatively shorter processing times. Epoxy coating is more resistant to mechanical influence as compared to casting resin.
Is there a natural alternative to epoxy resin?
EcoPoxy resin is a plant-based alternative to epoxy resin that is great for crafting with. It is certified as a BioPreferred Product by the USDA.
Do you need to seal permanent vinyl on tumblers?
I do not seal my vinyl on tumblers. Most vinyl manufacturers actually recommend that you don’t apply a sealer over the vinyl. The exception to this would be if you want to go through the process of sealing your tumbler with epoxy. This is usually done with glitter tumblers.
What do you seal glitter tumblers with?
Seal glitter on the tumbler with a gloss clear spray sealer or brush on mod podge. Allow tumbler to dry. 5.
Is it better to use HTV or permanent vinyl on tumblers?
For water bottles, I would definitely go with adhesive. There are specialty ones that can withstand heat transfer vinyl, but it has a special coating on it that will accept that. So use a permanent adhesive for glasses, mugs, cups, whatever, it’ll stick great.
Is glossy or matte Mod Podge better?
What is the difference between Mod Podge Gloss, Matte, and Satin? In terms of how they operate and being glues, sealers, and finishes – they are all the same. The ONLY difference is the sheen.
Can you use Mod Podge on top of resin?
Cover the curing resin so dust does not ruin the finish. Use an inverted box for multiple items or cups for individual items, leaving space for air to circulate. To prevent discoloration, seal both sides and edges of the image with Mod Podge® or Elmer’s® Glue-All®. Let adhesive dry completely before adding resin.
How do you seal with epoxy?
Sand the project. Remove all dust from the project with tack cloth. Place newspapers or a drop cloth underneath the project. Pour epoxy resin and hardener into a clean coffee can. Apply epoxy using a bristle brush. Check for runs or dry spots as you paint. Allow project to cure for 24 hours in a dust-free room.
Do I seal my glitter before epoxy?
Let the glitter and mod podge layer dry for several hours or even overnight. This just helps keep all the glitter stay sealed down enough so when you add epoxy in the next step you’re not brushing glitter all over the place. Wait several hours for the cup to dry really well before moving on to epoxy.
How long does it take for epoxy to dry on a tumbler?
Let The Tumbler Cure: Leaving the motor running, allow the cup to continue turning until the resin is dry to the touch, approximately 18-24 hours later. Remove the tumbler from the cup turner and remove the tape. Allow the cup to continue curing – it will be fully cured at the 72 hour mark.
