Table of Contents
Pegboard spacers come in a few different types. Some are little metal domes; others are plastic cylinders. You can also make your own spacers with scrap lumber or plywood, or even stacks of metal washers. Pegboard spacer with anchor and screw.
What are pegboard spacers for?
Pegboard Spacers hold pegboard away from wall allowing clearance for hooks. No furring strips required. Only use included plastic anchors if fastening into drywall.
How far apart should furring strips be for pegboard?
Measure the width and height of the area where you plan to hang the pegboard, then calculate the number of furring strips you’ll need (they should be spaced every 16 inches).
How do you use pegboard spacers?
Insert a screw with a washer into each marked hole on the pegboard, then fit a spacer onto each screw, on the back side of the pegboard. Position the pegboard against the wall and drive each screw into its corresponding anchor or into a wall stud. If you’re not using a spacer kit, use 2-inch washer head wood screws.
Can I make my own peg board?
Drill a hole through each point you’ve marked, making sure you drill all the way through the wood. Ensure you use a bit that is the same size as your dowelling, so the pegs fit in securely. This step is completely optional (you might like the raw wood look), but I think paint adds a bit of personality to the pegboard.
How much space is needed behind pegboard?
Pegboard needs about 1/2 in. of ‘standoff’ space behind it so the hooks can be inserted. Plastic and metal pegboard panels have this space built in, created by the L-shape flanges at the edges.
How do you keep pegboard hooks from falling off?
To ensure hooks won’t fall out of your board, you have 4 options: Get the perfect hooks with double peg attachment and appropriate thickness for your board. Use metal wire to secure thin hooks. Use glue or a zip tie to secure the thin hooks to your board. Use plastic peg locks.
Do you need furring strips for pegboard?
Most pegboards need wooden furring strips mounted on the back to provide a gap so the pegs or hooks will fit properly. Use the pegboard measurement to determine the number of 1- x 2-in. Assume one furring strip for each horizontal edge and for every wall stud (which are usually 16 inches apart).
What do furring strips look like?
If you’re unfamiliar with what a furring strip is, it’s best described as a long, slender strip that’s constructed from either wood or metal. In most cases, furring strips are 1” x 2” or 1” x 3” in size and can be applied both horizontally or vertically.
Can you use nuts as spacers?
The fasteners that a washer is most commonly used with are screws and nuts, or threaded fasteners. Some other uses of the washer can be as a locking device, as a pre-load indicating device, and as a spring. In some unique cases, it can be used as a spacer.
What is nylon spacer?
Nylon Spacers are used to insulate against moisture and electricity, and are often used as glides, bushings, bearings and rollers. Nylon Spacers are safe for use in outdoor or indoor applications.
What is screw spacer?
A spacer is used to increase the distance between parts being fastened. Spacers are similar to standoffs, but standoffs include a threaded shaft or hole, enabling them to be fitted without an additional fastener.
Can you paint pegboard?
When painting pegboard, we would recommend using a paint gun (or spray paint) over rollers. When using rollers, it will be much easier to get the pegboard holes clogged up, which makes it harder to fill your board with all your pegboard accessories once it’s painted. Ideally, you’ll use a professional paint sprayer.
What is the best way to cut pegboard?
Jigsaw or circular saw: Using a jigsaw or circular saw is the best way to cut pegboard. For cutting pegboards, you need to use the proper size blade for the saw. You have to select the blade with fine sharp teeth for ensuring a clean cut through the pegboard.
How do you attach a pegboard to a workbench?
How do you make pegboard look good?
5 Ways to Make a Boring Pegboard on Fleek! Frame it! One of the things that bothered me the most about the classic pegboard setup is that it looks a little unfinished when it’s just hung on the wall as is. Paint it! Add some pattern! Accessorize it (with your color theme)! Go a little green!.
What are Pegboard hooks made of?
They are made of hardened steel coated with nickel to reduce rusting and corrosion. They are an excellent fit for any standard sized pegboard. The hooks will fit on holes with a thickness of 3/16 inches, ¼ inches, or 1/8 inches.
Can you paint masonite pegboard?
You should use a glossy paint. Chances are, your pegboard is going to get wet now and then. The glossier your paint, the more resistant the board will be to water. Because we were using such a dark color (navy!), we had to give the board three thin coats of painting, waiting 30 minutes between each coat.
Do I need to prime pegboard before painting?
Similar to painting walls or furniture, it’s important to use primer first. So first I gave the face of my pegboard a quick coat of Zinsser Primer. Once it was dry, I added 2 coats of my desired taupe-y color (I mixed a few hues to get the color just right).
Can you paint IKEA pegboard?
If you’re not going to cut the boards, you can just paint the rail black and use it. Step 5. Apply black self-adhesive on the wall behind the pegboard (or paint it black). This will help to accent your pegboard cut-outs.
