Table of Contents
The three common choices when it comes to wood decks are redwood, cedar and pressure-treated wood that can be made of various types of wood species. Redwood and cedar are both naturally insect and rot resistant and have a natural look, but each has its own inherent issues.
Can you use 2×6 for deck boards?
Wood decking is commonly available in 2×6 and 5/4 x 6 profiles. 5/4 x 6 is produced specifically for decking and is milled with a radius edge or bull nose. 2×6 is thicker and is stronger, but is also more expensive. Spacing between deck boards provide a few critical functions.
Should I use 2×4 or 2×6 for deck?
If you use 2x4s for deck joists, it may cost more money and work in the long run. The material costs more than if you purchase 2x6s because the 2x4s can’t span as far, and you must create more beams and footings for support. You also can’t include guardrails and stairs with 2x4s as your support.
What size deck boards should I use?
Width: Six-inch wide boards are ideal in most cases. Four inch wide material takes longer to install, creates more gaps and requires a lot more fasteners—but you can use it. Eight inch wide boards, because of their greater width, have more of a tendency to crack and cup; avoid using them.
What is the best wood for decking?
One of the most popular woods used for decking is pressure treated (PT) wood. PT wood, as we mentioned, is most often made of softwood, usually pine, and has undergone a chemical preservation treatment to make it resistant to moisture and insects.
Is it better to use 2×6 or 2×8 for deck?
For upper-level decks, 2×10 is recommended as the minimum size to use for strong guard post connections. 2×6 joists should only be used on ground-level decks that do not require, and will not provide for, any guards. Most decking is not strong enough to support longer spans than 16″.
What is the most common deck board size?
The most common or standard deck board width is 6-inch wide planks based on square-foot coverage, labor, and material cost.
Is 4×2 OK for decking?
4 x 2 Timber Rail / Joist These decking joists are the most common sized framing timber for decking. They provide a solid structure for fixing your decking boards too. When making your decking frame you should use a 400mm spacing between your timber joists.
How thick should decking boards be?
Most composite brands have the same thickness, but softwoods and hardwoods will range from 1″ to 2″ thick for decking. Softwoods should be at least 1 1/4 inches thick for a 16″ on center span. 2 inches thick will allow for a 24″ on center span.
Can I use 1×6 for decking?
Never use 1×6 or 5/4×6 material in close to ground applications. Spacing between boards: You must allow space for your deck boards to expand when they take on moisture, as they will inevitably do when exposed to wet weather, rain or high humidity.
Can I use 2×8 for deck boards?
Q: Can I use 2×8 treated lumber as deck boards? A: No, that’s a not a good idea. Lumber wider than 6 inches should not be used as a flat surface. Wide, flat boards have a tendency to pool rain water, which can lead to cupping problems.
Do deck boards need to be pressure treated?
As long as there’s a good chance that moisture can reach the wood, it should be pressure treated. This is why the International Building Code requires that siding and structural lumber used for the last six inches of the structure above the ground is pressure treated.
Can I use 2×8 for deck joists?
2×8 for joists will be fine, with 16″ OC. Should use 2×10 for beams but 2×8 will be fine as well. If you are worried you can triple the 2×8 for the beams but double will be sufficient. You should put the beams at 7 and 14 feet out from the house, with the piers you should do 3 per beam with spacing of 1, 7, 13.
Can I use regular lumber for a deck?
Both pine and standard “white wood” lumber work well for deck construction. Some pines are nearly as resistant to rot as cedar, and both of these options take paint well. Paint will increase the longevity of a pine deck to some extent, but cannot give the same results as cedar, redwood or treated lumber.
Is pressure treated wood safe for decks?
With the copper content in pressure-treated wood as high as it is, it’s resistant to rot and insects. Pressure-treated wood is ideal for decks, posts buried in the ground, and even ground contact in finished basements, but it’s not always the best product for every job.
How long will a treated wood deck last?
A deck made of untreated wood can last anywhere from 10 to 30 years. Decks made of treated wood and composite materials can last as long as 50 years.
How many decking boards do I need for a 10×10 deck?
For a 10×10 square deck, you would therefore need twenty-two 10′ deck boards. Dimensions for deck boards can vary depending on the look you want and the deck board type you use. However, the most common is a 5/4” thick by 6” wide deck board of any length.
How far can a 2×8 span for a deck?
Depending on various factors, the maximum span for a 2×8 floor joist is 16′ 6”. The maximum span for roof rafters is 23′ 9”. For headers, the maximum span is 11′ 2”. Finally, a single deck beam has a maximum span of 5′ 11” and double maxes out at 8′ 9”.
