Table of Contents
What blade do you use to cut vinyl on Cricut? To cut vinyl with ease, we recommend the premium fine point blade and a green mat. Once your design is created and you are ready to cut, we do recommend choosing “more pressure” when cutting vinyl.
What blade cuts vinyl on Cricut maker?
Which Blade Do I Use For This Project? Material Type Best Blades Regular Cardstock (65 lb. to 110 lb.) and papers Fine Point Blade (the standard blade) Vinyl (any type) Fine Point Blade (the standard blade) Very thick cardstock and things like Kraft board Deep Point Blade (Explore) or Knife Blade (Maker).
What setting should Cricut be on to cut vinyl?
Premium Vinyl – Permanent: Cutting and application instructions Machine Blade Depth Speed Cricut Personal Cricut Create Cricut Expression 3 Medium Cricut Expression 2 4 Medium Cricut Imagine 3 Medium Cricut Explore Turn the Smart Set Dial to “Custom”. Select “Browse all materials”, then select “Premium Vinyl – Permanent”.
Why is my blade cutting through my vinyl Cricut?
In general, your cutting machine cuts through the vinyl backing if the settings are incorrect, usually, the pressure is too high. Adjusting your pressure, changing your blade, and doing test cuts can fix it for your next try. Meanwhile, transfer tape and patience can salvage most projects with cut backing.
How do I know what blade is in my Cricut?
You can easily identify this blade in retail locations by the red or white protective cap. The blade housing that ships with the Explore machines was designed to house the Premium Fine-Point blades. The Cricut Explore Deep Point blade has a steeper blade angle (60 degrees vs. 45) and harder, more durable steel.
Does the Cricut maker come with a knife blade?
Cricut Maker Series Note: Knife Blade, Rotary Blade, QuickSwap Tools, machine mats, and other accessories sold separately. Premium Fine-Point Blade + Blade Housing (pre-installed in the B clamp).
What should the cut pressure be for vinyl?
Vinyl: Cutting and Application Instructions Machine Blade Depth Pressure Cricut Expression 2 4 3 Cricut Imagine 3 3 Cricut Explore Turn the Smart Set Dial to Vinyl. Cricut Maker Select Browse all materials, then select Vinyl from the list of materials.
What Cricut blade cuts glitter vinyl?
Glitter Vinyl: Cutting and Application Instructions Machine Blade Depth Blade Assembly Cricut Personal Cricut Create Cricut Expression 2 Fine-Point Cricut Expression 2 4 Fine-Point Cricut Imagine 3 Fine-Point Cricut Explore Turn the Smart Set Dial to Custom. Select Browse all materials, then select Glitter Vinyl. Premium Fine-Point.
Does the shiny side go down on Cricut?
The shiny side goes down when your cutting. The vinyl side goes face up. You want to cut through the vinyl, but not through the carrier sheet.
Why won’t my vinyl cut all the way through?
Inspect the blade and blade housing and remove any debris that may be stuck to the blade or lodged in the blade housing. Once clean, perform a test cut. Blades can become dull with use and replacing them with a new, sharp blade often solves this issue.
Why won’t my Cricut cut through glitter vinyl?
Because of the sparkly, rougher texture of glitter vinyl, it requires a bit more blade pressure than regular vinyl. As such, don’t use the “Vinyl” setting on your Explore dial. Instead, set your dial to “Custom.” When you do this, you will be given a drop-down menu in the Cricut Design Space cut screen.
Do you remove the back of vinyl before cutting?
You want the blade to cut through the vinyl cleanly without cutting through the backing. This is called a “kiss cut,” and it will make it much easier to weed and apply your decal in the next steps.
How do you cut vinyl decals by hand?
Scissors. An exacto blade. A squeegee or application card. Step 1: Design & Print. This is the easiest part of the process. Step 2: Trim Decal Template Down. Step 3: Test Fit. Step 4: Tape Down Template. Step 5: Cut Around Letters or Graphic. Step 6: Apply Transfer Tape to Decal. Step 7: Cut Out, Apply and Peel.
Do you peel the back off vinyl before cutting?
Gently peel the transfer tape from the paper backing at a 45-degree angle. If the vinyl does not transfer to the tape lay it back down and burnish it again. Now, it’s time to clean the surface that you’ll be applying the vinyl to.
Are all Cricut blades the same?
Are Cricut Blades Interchangeable? The Fine Point blade and the Bonded Fabric blade can use the same housing. Also, the QuickSwap tools can use the same housing, so if you already own one, from now on, you only need to get the tip or blade.
What is the Cricut knife blade used for?
The Knife Blade is designed to cut materials much thicker than anything else the Cricut Explore has been able to cut before, even with the Deep Cut blade. Materials can be up to 3/32″ thick. Think chipboard, thick leather, balsa wood, basswood, and more! It’s similar to a super precise X-ACTO knife for your Cricut.
What does the Cricut knife blade cut?
Knife Blade is intended for use with thick, dense materials such as balsa wood, Cricut Chipboard, leather, and craft foam up to 2.4mm or 3/32″. Because of this, Knife Blade will wear quickly compared to other blades.
What blades come with Cricut maker bundle?
Your Cricut Maker Box will Include both the Cricut Fine-Point Blade and housing, as well as your Cricut Rotary Blade with housing. You will need to purchase the Cricut Knife Blade, Cricut Scoring Wheels, Cricut Deep-Cut Blade and Cricut Bonded Fabric Blade if you wish to have them on-hand and ready to go.
What is the rotary blade used for on the Cricut maker?
The Rotary blade can be used to cut out quilting and sewing patterns. It can be paired with the Cricut Washable Fabric Pen to not only cut out patterns but draw all pattern markings eliminating two tedious tasks associated with sewing.
What blade comes with Cricut explore 2?
The Fine-Point blade comes stock with the Explore Air 2 and Cricut Maker machines. The blade housing is available either gold or silver in color (both are the same). This blade was previously called the Premium German Carbide blade and is the standard blade to use with your machine.
What is kiss cut on Cricut?
Kiss cut stickers are cut through the vinyl layer around the edge of your design without cutting through the backing paper. This leaves an extra backing around your sticker.
What is the liner side of vinyl?
The shiny side is the liner, and the dull side is the heat activated side that you will adhere to an object. You can tell iron-on vinyl from regular vinyl by the front liner.
Why is my new Cricut blade cutting too deep?
If your Cricut blade is going cutting too deep or not cutting how it should, your blade may need replacing, you may have chosen the incorrect vinyl type or you may be using the wrong blade altogether.
