Table of Contents
You should use archival-quality mat boards and mounting boards that are made from 100% cotton fiber, as well as archival tape, and then frame your work behind glass or Plexiglass for the best protection.
What is backing board for art?
Backing boards are a supportive board that goes directly behind your art. It gives your artwork rigidity. For example, a poster might naturally want to sag or buckle, but a backing board will help sandwich the thin poster paper in place.
What to use for backing prints?
Depending on your requirements and the size of your picture frame, there are various backing board materials that may be used. Foam Board (Foam Core) Gatorboard. Matboard. Di-Bond. Sintra.
How can I protect my art paper?
A smooth, glossy paper that’s air, water, and grease resistant, glassine is used by artists to wrap paintings and place between stacked drawings, etchings, prints, maps, and watercolors.
What can I use as a backing board for a picture frame?
Depending on what you’re framing; you can use cardboard, standard foam board, acid free foam board, mat board, hard board, chip board, easel backs, or what the heck, you can even use wood.
What can I use instead of mat board?
Use alternative forms of matboard: Scrapbooking papers (a wide selection can be found at any craft store), recycled, vintage papers (see above!), or even swatches of thick fabric can all be used to mat art and photography.
What is a picture mount board?
In the picture framing industry, a mount board is a thin, flat piece of coloured card included within a picture frame, which serves as additional decoration and to perform several other, more practical functions such as separating the art from the glass.
What is board backing?
Backing boards come in any size. Backing is used to provide support and protection for your artwork, either in a picture frame or as a standalone product in a show kit. Many of the frames purchased in local shops come with cardboard backing which will damage the artwork over time.
What is backing board made of?
Backer board is made from cement, water, silica, limestone flour, and reinforcing fibers like fiberglass for strength.
What can I use instead of glassine?
If you’re out of Glassine paper or are concerned about cost, acid-free white tissue paper is a better choice than wax paper.
Can you tape glassine paper?
Answer: yes tape will stick to this paper.
Does glassine paper stick?
Glassine protects artwork because it has a hard, glossy surface, even though it’s as thin as tracing paper. Glassine is not porous – it would not allow air to get to the paint, and it might even stick to it. No, the painted surface has to be dry.
What material is used for picture frames?
Wood, aluminium and polystyrene (styrofoam) are the most common picture frame materials. Solid wood is very popular, though metal and styrofoam frames provide cost, quality, lightweight options.
Is mat board the same as Mount Board?
Much like mat board, mount board serves to protect a framed photograph or piece of artwork by providing a rigid, sturdy backing to keep photographs and artwork from moving or warping in the frame. The location of mount board is basically the opposite of mat board.
What is foam board backing?
Foamcore, foam board, or ‘paper-faced foam board”””’ is a lightweight and easily cut material used for mounting of photographic prints, as backing for picture framing, for making scale models, and in painting.
Why are mat boards so expensive?
Simply put, the larger it gets, the more materials are used and of course, the price goes up. As size increases, larger and larger pieces of glass are needed and because of fragility, our actual costs per square inch go up as well. Mat boards come in basically two different sizes 32″ x 40″ and 40″ x 60″.
What is a matte board?
A lesson on Matboards. Matboard, also referred to as a mat, is a heavy paper-based material used in the picture framing process. This cardboard-like material sits between a frame and your photography or artwork to give it a complete finished look.
How do you make a mat board?
What thickness is Mount Board?
The boards will be thin and when you’re buying it, you should look to find out the thickness of the board. Ideally, look for a mount that’s no less than 1.3 mm, or as you may see it described – 1300 micron.
What GSM is Mount Board?
Sheets, 380 gsm Weight Size Content 380 gsm 70 x 100 cm 25 sheets.
What is the difference between mat board and illustration board?
Illustration Board is offered in hot and cold press: hot press is smooth while cold press has a bit of “tooth” or canvas-like texture. Mat Board. Heavy like cardboard, Mat Board is used in the framing process, to provide a decorative element as well as to distance the framed work from sticking to the glass.
How thick is a 4 ply mat board?
The thickness of a mat board, indicated as “ply,” is often an afterthought when it comes to selecting a mat board. In general, 4-ply (1/16-inch thick) and 8-ply (1/8-inch thick) are the most common, but 6-ply is also available.
What does backer board look like?
Cement backer board is a mineral-based pre-fabricated wall unit, usually 1/4-inch or 1/2-inch thick and 3 feet by 5 feet long. It is made of cement, water, silica, limestone flour, and fibers such as Kevlar or fiberglass for increased strength.
When should you use backer board?
Use backer board for all your tile jobs, including floors, walls and counters. You can also use it for thin exterior brick and stone. Some companies manufacture backer-board sheets with a rougher side for use with thinset mortar and a smoother side for use with ceramic-tile mastic.
What is Hardie board used for?
HardieBacker® cement board is a tile underlayment made to use on walls, with floors and countertops. Works as a tile backerboard and as an underlayment for tile, vinyl and wood flooring. 0.42\” cement board is made of 90% Portland cement and sand, resists damage from moisture and provides excellent tile adhesion.
What is the difference between cement board and gypsum board?
As a tile backing board, cement board has better long-term performance than paper-faced gypsum core products because it will not mildew or physically break down in the continued presence of moisture or leaks. Also cement board provides a stronger bond and support with tiles than typical gypsum board.
