Table of Contents
In terms of disassembling the laptop computer, the User Manual and the Service Manual are Two Resources that are helpful.
What resources are needed to make a computer?
Materials Motherboard – This is the part that binds all the other components together. Processor – The brain of the PC. RAM – Stands for random access memory. Hard Drive – The storage unit for large amounts of data to be stored for the long term. Optical Drive – Reads data from disks using a type of laser.
What is the very first step that should be taken when performing work with a computer?
What is the very first step that should be taken when performing work with a computer? You should power down the system and unplug it.
Which component may be considered a field replaceable unit FRU in a laptop?
A field-replaceable unit (FRU), such as a motherboard, display, keyboard, or touchpad, commonly requires some technical skill to install. RAM and a battery are considered to be customer-replaceable units (CRUs).
When disassembling a computer it’s okay to stack circuit boards on top of each other as long as you follow ESD protection rules?
When disassembling a computer, it’s okay to stack circuit boards on top of each other as long as you follow ESD protection rules. Immediately after you unplug the computer from the power outlet, you’re safe to begin working inside the case.
What natural resources are used to make laptops?
Entombing Natural Resources A number of valuable commodities are used to manufacture a laptop, including engineered plastics, steel, copper, aluminum and precious metals like gold, platinum and palladium.
What tools are needed in assembling and disassembling a computer?
You will need, at a minimum, the following simple tools: Screwdrivers and nut drivers. Needle-Nosed Pliers or Forceps. Cable Ties. Anti-Static Kit. Heat Sink Compound. Canned Air or Canless Air Duster. Pill Bottle or a Small Container. Multimeter.
In what order should you install components into the case after disassembling a computer?
Install components in the case in this order: power supply, drives, motherboard, and cards.
What should you do to dissipate any charge between you and the computer?
What should you do to dissipate any charge between you and the computer? Clip your ground bracelet to the side of the computer case. What should you do before disconnecting the wires leading from the front of the computer case to the motherboard if you don’t have the motherboard manual handy?.
What socket do coffee Lake processors use?
The LGA 1151 socket was revised for the Coffee Lake generation CPUs and comes along with the Intel 300-series chipsets.
Which component may be considered a field replacement unit or FRU?
A field-replaceable unit (FRU) is a printed circuit board, part, or assembly that can be quickly and easily removed from a computer or other piece of electronic equipment, and replaced by the user or a technician without having to send the entire product or system to a repair facility.
What is FRU and CRU?
What is the difference between a CRU and a FRU? A CRU is a Customer Replaceable Unit. A FRU is a Field Replaceable Unit. A FRU, however, requires that IBM Service personnel or an IBM Authorized Warranty Service Provider perform the replacement.
What are FRU components?
In electronic hardware, particularly computer systems, a field-replaceable unit (FRU) is a circuit board or part that can be quickly and easily removed and replaced by the user or by a technician without having to send the entire product or system to a repair facility.
Why is it vital not to stack boards on top of each other when disassembling a computer?
Terms in this set (10) When taking a computer apart why is it important to not stack boards on top of each other? You could accidentally dislodge a chip.
What are the two most common form factors used today for computer cases power supplies and motherboards?
The most common form factor is ATX, which evolved to mini-ATX, nano-ATX, pico-ATX, and further. A different type of form factor, and smaller than the ATX is the ITX, which is significantly smaller than the micro-ATX. The ITX form factor can also be found as nano-ITX, pico-ITX, mobile-ITX, and more.
What statement best describes a RAID 5?
RAID 5 is a redundant array of independent disks configuration that uses disk striping with parity. Because data and parity are striped evenly across all of the disks, no single disk is a bottleneck. Striping also allows users to reconstruct data in case of a disk failure.
What is disassembling of computer?
When referring to hardware, to disassemble is to break down a device into separate parts. A device may be disassembled to help determine a problem, to replace a part, or take the parts and use them in another device or sell them individually.
How do you disassemble a computer?
Computer disassembly Step 1 – Unplug your computer and peripheral items. Step 2 – Remove side covers. Step 3 – Disconnect connectors. Step 4 – Remove standalone fans. Step 5 – Remove the storage drive. Step 6 – Remove memory (RAM) modules. Step 7 – Remove power supply unit.
What is assembling and disassembling of computer?
Computer assembly is a process in which all the internal components of the computer system are fitted to make the computer functional. The main component involves CPU, motherboard, memory, disk drives, etc. An installation technician should be competent to disassemble and reassemble the computer system.
How do you disassemble a PC case?
You can take the vast majority of PC cases apart in four simple steps. Remove the sides. Start by taking off the side panels to get inside the case. Take out innards. Once you’re inside your case, you need to check it for accessories. Remove optical drive blanking plates. Remove floppy drive blanking plates.
What is the best indicator that you have successfully assembled a computer?
What is the best indicator that you have successfully assembled a computer? All wires are connected and the lights blink when turned on. The PC is able to boot up to the BIOS. You are able to close the system case cover.
What two different types of firmware may be used on motherboards?
There are two different types of BIOS: UEFI (Unified Extensible Firmware Interface) BIOS – Any modern PC has a UEFI BIOS. Legacy BIOS (Basic Input/Output System) – Older motherboards have legacy BIOS firmware for turning on the PC.
