Table of Contents
About Faucet Parts Cartridges & Stems. Aerators & Flow Restrictors. Washers & Washer Kits. Escutcheons & Flanges. O-Rings & O-Ring Kits. Caps & Index Buttons.
What are the components of a faucet?
A faucet is a device for delivering water from a plumbing system. It can consist of the following components: spout, handle(s), lift rod, cartridge, aerator, mixing chamber, and water inlets. When the handle is turned on, the valve opens and controls the water flow adjustment under any water or temperature condition.
What is the part of the faucet called where the water comes out?
Spout: The opening where water flows out of. Aerator: Small mesh screens placed on the end of faucets and used to regulate the flow of water into multiple small streams so that the volume of water that flows from the faucet would be significantly reduced.
What are the three parts of a faucet?
There are buttons and caps. Faucet handles. Faucet spouts.
What is the spout on a faucet?
The spout is the part of the faucet that most people notice first; it’s the part that delivers water from the body to the sink and it can be distinctive in its design. A straight spout provides a long reach with a low profile. A gooseneck spout has an elegant, high-arc shape that comes in handy for filling deep pots.
What holds sink faucet?
A locking nut or screws keeps a faucet firmly attached to the sink. Locate this nut and use the basin wrench to loosen and unscrew it. This nut can prove difficult to remove, depending on how long the old faucet has been in use.
What are the parts of a shower faucet called?
Tub and Shower Trim — A set consisting of the shower trim plate, showerhead arm and flange, and tub spout. Tub Spout — An output device through which water flows to fill a tub. The valve controls the flow. Two Handle Faucet — Two handle faucets feature separate handles to control hot and cold water temperature.
What is a sink flange?
The flange in your bathroom sink is the collar that surrounds the sink’s drain. It is usually made of metal, but may be made of plastic and coated in a metallic finish. If this flange cracks or erodes, it can cause water to leak through the sink at this point.
Where is kitchen faucet diverter?
The kitchen faucet diverter is usually located at the front of the faucet body, but on some faucets it faces the back.
What is the hole in the sink called?
The overflow hole is aptly named, as it keeps your sink from flooding. It does this by diverting water, giving you more time to act before the contents spill over if you or someone in your household accidentally leaves the faucet on or if you have a plumbing issue.
What is end of kitchen faucet called?
A tap aerator is found at the tip of modern indoor water faucets. Aerators can be screwed onto the faucet head to create a stream of air and water.
What are the parts of a bathtub faucet called?
Here are all the parts of a bathtub: Water Supply. Shower. Tub. Shuttoff Valves. Diverter Pipe. Planar Cross. Rim. Drain.
What is the difference between faucet and spout?
As nouns the difference between spout and faucet is that spout is a tube or lip through which liquid is poured or discharged while faucet is (north america) an exposed plumbing fitting; a tap or spigot; a regulator for controlling the flow of a liquid from a reservoir.
What is the difference between spigot and spout?
As nouns the difference between spigot and spout is that spigot is a pin or peg used to stop the vent in a cask while spout is a tube or lip through which liquid is poured or discharged.
What are the parts of a walk in shower?
Generally, building a walk-in shower requires gutting walls to access plumbing pipes, applying waterproof poly sheeting to the walls and floor, rebuilding walls using moisture-resistant drywall or backer board, installing drains, and pouring mortar to create shower pans.
What is the shower valve called?
Pressure balancing valves, also called mechanical or anti-scald valves, are the most common types of shower valves. A pressure balancing valve is designed to rebalance the water pressure to keep the shower from becoming excessively hot.
What are the holes on a shower head called?
Shower head parts called escutcheons or flanges are situated over the area of the arm as it fits into the wall. The escutcheon is largely decorative and serves to hide the opening made by the shower arm.
What are the parts of a kitchen sink called?
Here are some of the common parts of a sink you’ll find almost everywhere: Faucet: The faucet is the part of a sink where the water pours out. Controls: Controls are what allow you to turn the water on or off. Basin: The basin is the part of the sink that holds water from the faucet.
What are the parts of a sink drain called?
20 Bathroom Sink Drain Parts: How They Works? Shut-off valve. The shut-off valve is where the water reaches your sink system from the main supply. Ferrule and compression nut. Water supply line. Faucet handles. Faucet. Lift rod handle. Pop-up stopper. Pop-up flange.
