Table of Contents
LP record A 12-inch LP vinyl record Media type Audio playback Capacity Originally 23 minutes per side, later increased by several minutes, much longer possible with very low signal level Read mechanism Microgroove stylus (maximum tip radius 0.001 in or 25 μm) Dimensions 12 in (30 cm), 10 in (25 cm), 90–240 g (3.2–8.5 oz).
What is the standard size of vinyl records?
Standard Sizes Vinyl record sizes differ based on how much music is stored on the surface of the disk. Records come in three standard sizes: 7-inch, 10-inch, and 12-inch.
What are the 3 sizes of vinyl records?
Vinyl records also come in three standard diameters: 7-inch, 10-inch and 12-inch. The larger the diameter, the longer the groove can be and the greater the possible playing times, dependent upon rotational speed. (The actual playing time is a ratio between speed and the length of the grooves.)Apr 7, 2020.
Is my vinyl 33 or 45?
33 is the speed of long play records (albums) while 45 is the speed of singles, depending on if you are in the US or in Europe, there may be 12″ singles with 33 or 45 rpm. In general, the 78 rpm speed was used because of how fast it was.
How long is a 12-inch vinyl?
12 inch records are generally manufactured for full-length (LP) albums. At 33 rpm they hold around 15-22 minutes per side. 33 rpm is the most common speed for 12 inch records. Over 22 minutes per side is possible, but may require further adjustments to EQ and/or levels for it all to fit nicely and sound great.
What happens if you play a 33 record at 45?
The tip mass of the stylus will probably erase the highest frequencies from the record if you play it back at 45 instead of 33. The tip mass of the stylus will probably erase the highest frequencies from the record if you play it back at 45 instead of 33.
Can you play a 10 inch vinyl on any record player?
All record players will play the two most common sizes of vinyl record, those being 12-inch and 7-inch, but it is far less likely they will be able to play a 10-inch record.
Why is 45 RPM better than 33?
Since 45s travel faster than 33s, more waveform definition can be squeezed into the format, which takes up more room. More bumps and grooves created in pressing a 45 means better audio quality. Now, at 45 RPM’s the same audio will take up a foot and a half since its traveling faster.
Why is my vinyl skipping?
A common reason your records may skip is dust and dirt that gets into the grooves. While it may occur on old records due to storage, paper sleeves or dust in the environment, new records may also have dust or dirt.
What is the difference between an LP and a 78?
LPs are short for “long-play” and generally only applies to 33 rpm records. You can say “78s” or “78 records”. When the LP came out, 78s were retroactively called SP for “standard play” as opposed to EP “extended play”. 78s are usually made of shellac which is heavier and stiffer than vinyl.
How long is a 78 RPM record?
The durations of 78 RPM recordings is about three to five minutes per side, depending on the disc size. If it is a 12 inch disc, it usually holds four to five minutes of music. A ten inch typically holds three minutes. The 78 format faded from the scene by 1955, when vinyl took over.
How long is a 10 inch vinyl?
A carryover of the 78 rpm days, people still love the novelty of the 10” sized record. 33 ⅓ RPM: Timing for optimal sound quality is 9-12 minutes per side but can contain up to 15 minutes with some sound and volume drop off.
What size record is a 45?
What to Do with Your Vinyl Records Vinyl Records: Recording Lengths and Digital File Sizes 45 7″ 10.8 MB 10″ 32.4 MB 12″ 36 MB 16 2 ⁄ 3 7″ 48 MB.
What is the difference between 7 and 12 vinyl?
Vinyl normally comes in 2 sizes, 12 inches or 7 inches. There are 10 inch records but these have been popular since the 1950s. Most 12 inch records are albums and play at 33 rpm. Most 7 inch records are singles (one song on each side) and play at 45 rpm.
What are 78 records?
Any flat disc record, made between about 1898 and the late 1950s and playing at a speed around 78 revolutions per minute is called a “78” by collectors. The materials of which discs were made and with which they were coated were also various; shellac eventually became the commonest material.
How do I know what speed to play my vinyl?
Check the product page, record cover, or record label to confirm what speed a specific album should be played at. Most turntables will play both 33 1/3 and 45 RPM records, some play at all three speeds. 78 RPM records are extremely rare.
Is it harmful to play a record at the wrong speed?
Does it damage the record? In fact, they say that records were meant to be played at different speeds, and as long as you are not playing them at ridiculous ones (i.e., more than 100 rpm), then there is no harm in doing so.
