Table of Contents
Overall, a standard toilet will be between 27 and 30 inches deep, with a back height of 21 to 31 inches and a width of about 20 inches. An ADA-compliant version needs to have a seat height of 17 to 19 inches.
How much room is needed for a toilet?
Most codes require at least 15 inches (measured from the center of the toilet) from any side wall or obstruction and not closer than 30 inches center to center to any other sanitary fixture. (The NKBA actually recommends 32 inches.) There should be at least 24 inches of clear space in front of a toilet or bidet.
Are toilets universal size?
Are there different sizes of toilet? Yes, toilets come in a range of different sizes, that’s why it’s important to measure your existing toilet seat before you buy.
What is the smallest space for a toilet?
The Minimum Space Needed for a Toilet A minimum distance from the centerline of the toilet to the side wall of 15 inches. When designing a toilet compartment, you must provide a floor space that is 30 inches wide and 60 inches long.
What is the width of a toilet space?
When designing the area your toilet will sit, you must provide a floor space that is at least 30 inches wide and 60 inches long. A minimum spacing between the center of adjacent fixtures of 30 inches. This code has to do with other fixtures near the toilet, things like a bidet.
How do I know what size toilet I need?
Measure from the wall behind the toilet to the center of one of the closet bolts (which hold the toilet down). If the toilet has four closet bolts, measure to the center of one of the rear ones. Then measure from the center of the mounting holes to the back of the new toilet you’re considering.
How do you measure for toilet installation?
To measure the bowl shape, you can start by putting your measuring tape at the back of the toilet, and extend the tape forward to the end of the bowl, measuring parallel to the floor. The most important measurement you can take for a replacement toilet is the rough-in dimension.
Can any toilet fit?
For a standard toilet, the rough-in measurement should be between 11 inches and 13 inches. If the rough-in measurement is not between 11 inches and 13 inches, a standard toilet will not fit the space, and you will need to look for a toilet designed for that specific rough-in distance.
How far apart should a toilet and bidet be?
Building codes specify a minimum of 30 inches between a bidet and a toilet.
How far should a toilet be from the back wall?
The Distance To Set The Toilet Flange From The Back Wall. You’ll want to set the center of the water closet flange 12 inches from the finished back wall.
How close can toilet be to bathtub?
It is recommended that the distance from the centerline of a toilet and/or bidet to any bath fixture, wall, or other obstacle should be at least 18 inches. The minimum distance from the centerline of a toilet and/or bidet to any bath fixture, wall, or other obstacle is 15 inches.
Are all toilet bases the same size?
Standard toilets will measure between 15 and 17 inches, while chair style toilets can be up to 17 inches. Standard toilet rough in dimensions are 12 inches but can be anywhere from 10 to 14 inches in some cases.
Can you replace a 12 inch rough in toilet with a 10 inch?
A toilet with a 12-inch rough-in will definitely not fit into a space with a 10-inch rough-in, but a toilet with a 10-inch rough-in actually has extra space in a 12-inch rough-in space.
What do I need to know before buying a toilet?
While there are many features to consider when buying a toilet, including height, bowl shape, color, style, and flushing technology, most toilets fall into one of two basic types: gravity-feed and pressure-assisted. Gravity-feed toilets dominate the market, but pressure-assisted models are worth a look.
Can you replace a 14 inch rough-in toilet with a 12-inch rough-in toilet?
You can, but the back of the toilet tank will be two inches further away from the wall. The “rough-in” dimension refers to the distance from the wall framing (½-⅝″ behind the finished wall surface) to the center of the sewer pipe on the floor. Standard rough-in is 12 inches.
Are you supposed to caulk around a toilet?
Caulk keeps your toilet secure the floor, and avoids any chance of injury or toilet malfunctioning. It’s actually required by the International Plumbing Code to caulk a toilet to the floor, and now knowing the reasoning behind it, why would you not want to?Dec 13, 2021.
What does 12 rough-in mean for toilet?
The toilet rough-in refers to the distance from the finished wall to the center of the toilet’s floor drain or waste outlet. Most toilets have a rough-in of 12 inches, although it’s not uncommon for older homes to have an unusual size such as 10″ or 14″. Rear-outlet toilets are configured a bit differently.
Can a round toilet be replaced with an elongated toilet?
Yes and Make the rough in distance from the back wall 13–1/2 inches and 16- 1/2 inches high toilet from the floor. and place it 1ft 6 inches from any side wall.. That will be perfect and then you can enjoy it.
Is replacing a toilet easy?
Replacing and installing a new toilet isn’t as hard as it sounds. All you need are a few hours, a helper and the right tools and toilet parts for the job.
What is the difference between round and elongated toilets?
A round front bowl generally has a dimension of approximately 16.5″ from the seat bolt holes to the tip of the bowl. An elongated bowl is approximately 2″ longer, or about 18.5″. (Note: these dimensions can change from manufacturer to manufacturer, but there is almost always about a 2″ difference between the 2 sizes).
