Table of Contents
The black diamonds which appear every 19 3/16” on metal tape measures are for spacing I-beam “timbers.” Several wood-product manufacturers offer I-beam “timbers” as a substitute for solid lumber floor joists. The diamond marks on tape rule blades are for spacing these engineered floor joists in new construction.
What the mysterious black diamonds on measuring tapes are meant for?
The black diamonds on the tape measure represent that spacing. The first black diamond is at 19.2 inches” and after that black diamonds appear at 38.4, 57.6, 76.8, and 96 inches or 8 feet. That is one less stud for every 8 feet of wall, counting the beginning and end studs.
What is the red dot on a tape measure?
The red is for 16-inch-on-center spacing. The common framing spacing is for wall studs, floor joists and roof rafters. There will be red marks on the tape measure if you decide to space frame at 24 inch centers.
What is M on a measuring tape?
On many tapes (but by no means all) you will find a small red rectangle with the letter M printed inside followed by a number. The number simply denotes the year that the blade was stamped as conforming to the Measuring Instruments Directive. On the whole this will also be the year in which that tape was manufactured.
What is the 8 foot rule?
It’s called the 8-foot rule. A leader at a manufacturing facility recently gave the direction to his leadership team to engage with their employees every time they come within eight feet of one of their employees. It’s a simple rule that is simply brilliant!Aug 1, 2013.
What does 19.2 mean on a tape measure?
Support. The black diamond marks every 19.2″ on our tape rule blades. This is for spacing of engineered joists common on job sites. The 19.2 inches allows for a break at 8 foot to accommodate full sheets of plywood.
What are the black numbers on a tape measure?
Tape measures often use small, black diamond or triangle shapes called black truss marks. They indicate truss layouts of every 19 3/16 inches. This spacing is often used by some engineered joist manufacturers. There are 5 of these marks for every 8 feet.
What is the distance between the little black diamonds?
The black diamond marker on a tape measure falls between the 16-inch and 24-inch spacing. This marker is commonly used in building a concrete block chimney. But, it has other uses too. Marked at 19.2 inches apart, using this type of placement also allows for more weight loads with fewer pieces of wood.
What is more accurate than a tape measure?
The laser measure is accurate to within 1/8″ and measures to 50 feet. It makes this measuring tool more accurate, easier and faster than a tape measure.
How many 16th are in an inch?
In this case, there are 16 units of smaller quantity (1/16 inch) in one unit of the larger quantity. Multiply the larger-quantity amount by the number of smaller units per unit of the larger quantity. Multiplying 16 by 0.5 gives you 8, so 8/16 equals 0.5 inches.
What does the arrow on a tape measure mean?
Every 16 inches, you may see a double arrow, a number marked in red, or the word “STUD.” This helps you locate every stud that may run across a wall once you’ve located the first one.
What are the two groups that tapes are classified in?
There are two basic types of tape measures with cases: spring return pocket tape measures and long tape measures. Spring return pocket tape measures will generally fit in a pocket. They are small; the case is up to about three inches across. The tape is returned to the case by a spring mechanism.
Why is the number 16 red on a tape measure?
The red indicates 16-inch-on-center spacing. This is a common framing spacing for wall studs, floor joists and common roof rafters. If you decide to space framing at 24-inch centers, the red marks will be at every other foot marking on the tape measure.
What is the 5 foot rule?
The rule dictates that when a staff member is 10 feet from a guest, the staff smiles and makes direct eye contact, and when they are within five feet, the staff verbally greets the guest. Applying this principle to nursing homes is a simple, inexpensive way to enrich patient and staff lives.
What is the 20 foot rule?
At 20 ft (6.1 m), the gun-wielder was able to shoot the charging knife attacker just as he reached the shooter. At shorter distances the knife wielder was always able to stab prior to being shot.
What is 5/16 on a measuring tape?
How to Read a Tape Measure. Tape measure markings represent lengths in inches and fractions of an inch. Each large tick represents one inch (1″), and the ticks between represent the following fractions: 1⁄16“, 1⁄8“, 3⁄16“, 1⁄4“, 5⁄16“, 3⁄8“, 7⁄16“, 1⁄2“, 9⁄16“, 5⁄8“, 11⁄16“, 3⁄4“, 13⁄16“, 7⁄8“, and 15⁄16“.
What is the difference in a type 1 and type 2 rated tape measure?
These are adequate for the majority of users and a Class II tape allows for a potential error of ±2.3mm over a 10m length. Class I rated tapes are the most accurate and an error of no more than ±1.1mm over a 10m length can be anticipated.
Are tape measures accurate?
The tape measures themselves are manufactured with varying degrees of quality, but as per NIST Handbook 44 (PDF), a six-foot-long tape used for commerce must be accurate to within 1/32 of an inch. As anyone who’s ever tried to build anything knows, our friend the humble tape measure is a useful tool.
