Table of Contents
Editor’s Pick: CURT 13333 Class III Trailer Hitch. Reese Towpower Class III Starter Kit. CURT 13146 Class III Trailer Hitch. CURT 14301 Class IV Trailer Hitch. CURT 13432 Class III Trailer Hitch. Connor 1623750 Tri Ball Trailer Hitch. Weigh Safe LTB6-2.5 Drop 180 Hitch. Towever 84180 Class III/IV Ball Mount Trailer Hitch.
What is the strongest trailer hitch?
Class 5 trailer hitches have the highest weight ratings of the receiver hitch classes, offering as much as 20,000 lbs. GTW. They are typically used on full-size pickups and commercial trucks.
What are the three basic types of trailer hitches?
The Different Types of Trailer Hitches Rear Receiver Hitch. Front Mount Hitch. 5th Wheel Hitch. Gooseneck Hitch. Pintle Hitch. Bumper Hitch. Weight Distribution Hitch.
Which is Better Class 2 or Class 3 trailer hitch?
Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to 3,500 lbs in GTW and up to 525 lbs in TW. A Class III hitch is rated to tow heavier loads; the max GTW is 4,000 lbs and the max TW is 600 lbs.
Is curt or Draw Tite better?
The Curt and Draw-Tite Hitches have the same maximum Gross Trailer Weight, however, the Curt hitch has a larger maximum tongue weight capacity of 525 lbs. compared to Draw-Tite’s 300 lbs. However, you are limited by your vehicle’s tongue weight capacity of 200 lbs. so both will work for your needs.
What is the difference between a Class 4 and Class 5 hitch?
Class IV Hitch: A Class 4 trailer hitch can handle a GTW of up to 10,000 lbs. Class V Hitch: A Class 5 trailer hitch can handle a GTW over 10,000 lbs. and a maximum tongue weight over 1,200 lbs.
What size hitch should I get?
The best way to measure your receiver hitch tube is to measure inside of the tube to inside of the tube. This will help you know what size ball mount you need to get for your hitch. It may be 1-1/4″ common on cars and cuvs. Most likely it is either a 2″ or 2-1/2″, which is often found on most SUV and pickup trucks.
What class trailer hitch do I need for a bike rack?
Light-Duty Receiver Hitches (Commonly known as Class 1) Light-duty receiver hitches are designed typically for towing bike racks and cargo carriers. This style of hitch can also be used to tow smaller utility or enclosed trailers, and motorcycles as well. The maximum gross trailer weight should be less than 2,000 lbs.
How much does a trailer hitch cost?
For the service, expect to pay around $100 to $150 for a typical hitch installation. Particularly complicated and time consuming hitch installations may cost more. Keep in mind that hitch parts aren’t cheap either and can cost anywhere from $25 to $200.
How do I know if my hitch is Class 1 or 2?
Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue weight rating of 350 pounds and a towing rating of 3,500 pounds.
What’s the difference between a Class 3 and Class 4 trailer hitch?
The main difference between a Class III hitch and a Class IV hitch is the capacities they set for the hitches. Class III hitches are rated for up to 6,000 lbs GTW with 600 lbs TW whereas a Class IV is rated for up to 12,000 lbs GTW and 1,000 TW. For more info on the hitch classifications check out the link I attached.
What is a Reese hitch?
Reese is a leading manufacturer of aftermarket hitches with more than 60 years of history. Reese hitches have been in the vanguard of hitch design and quality. Throughout its history, the company has been setting the industry standard for premier aftermarket towing products around the globe.
What class of trailer towing hitch would a customer towing a 3100 pound trailer need?
Class 3 trailer hitches pull heavier loads on passenger vehicles and full-sized trucks. These hitches are extremely sturdy and range from 3,500 to 8,000 pounds towing capacity. These hitches also offer higher tongue weight capacities of between 350 to 800 pounds.
How much do Class 1 hitches tow?
Class 1 (Small Vehicles) – Towing capacities up to 2,000 lbs. GTW (Gross Trailer Weight) and 200 lbs. TW (Tongue Weight).
What type of hitch allows the ball platform to be removed?
Receiver Style Hitches The ball mount (also called ball platform) is removable when the hitch is not being used. This leaves the hitch’s opening about even with your bumper. The most popular style of hitch and is what you see on most trucks, SUV’s, RV’s and vans.
Is Curt a good hitch?
The Class III hitch from Curt represents the best value proposition for the segment with a low cost and balanced performance. Featuring a 500-pound tongue weight rating, and a 5,000-pound gross trailer weight rating, this hitch bolts on to fit a huge variety of cars, trucks, and SUVs.
Are Draw-Tite hitches good?
The DrawTite hitch is very good quality and a lot less expensive than OEM.
Are Reese and Draw-Tite the same?
The Reese and Draw-Tite products are manufactured by the same parent company, this means that the # 26102 and # 26002, Dual Cam Sway Control systems are the same, but there is a difference in the generations of the systems.
