Table of Contents
A step drill bit can be used to drill a range of different sized holes with a single bit. Since each bit size drill holes less than 1/4″ deep, a step bit is mainly used for drilling thin material such as sheet metal.
Why do you use a step drill bit?
A step drill is used for Drilling a hole or Enlarging an existing hole in thin materials, especially for thin sheet metal. Not solely drilling, a step drill also has the ability of chamfering and deburring the cutting edge of workpiece by using the bevel of the next step.
Can step drill bits be used on wood?
A step bit is designed primarily for drilling in thin metal, up to 1/4 inch, but will work with wood. The stepped design allows you to use a single bit to drill holes with different diameters.
How thick of metal can a step bit drill?
A step drill bit for metal allows you to drill holes in a variety of diameters, and some will drill through metal up to 3/8 in. thick. The downside? Step bits are more expensive than regular bits.
Which drill bits are for wood?
High-Speed Steel (HSS) drill bits are used for drilling wood, light metals, fiberglass and PVC. Black oxide-coated drill bits are more durable than standard HSS bits and the coating helps the drill bit resist rust. These are best for hardwood, softwood, PVC, fiberglass and steel.
What does it mean to ream a hole?
Definition of ‘reaming’ Reaming is done to a hole which has been already drilled, to produce a truly circular hole of exactly the right diameter. Reaming involves widening the opening of a hole. Reaming is a cutting process in which a cutting tool produces a hole of a very accurate size.
Can you countersink with a step drill bit?
Step Drills are designed to do two jobs in a single pass. They are used to drill a hole with a counterbore, countersink, or chamfer. They can be re-sharpened or easily modified for a special length of step.
What is a Unibit used for?
A unibit (often called a step drill bit) is a roughly conical bit with a stairstep profile. Due to its design, a single bit can be used for drilling a wide range of hole sizes. Some bits come to a point and are thus self-starting. The larger-size bits have blunt tips and are used for hole enlarging.
What is a Unibit drill bit?
The IRWIN UNIBIT Step Drill Bit gives you maximum drill control to make up to 12 hole sizes with the same bit in 1/16” steps, from 3/16″ to 7/8″, while the single flute design creates precise, clean holes. SpeedPoint tip for fast starts. Single fluting cutting edge drills clean, true holes. Durable, high-speed steel.
What is a Forstner drill bit used for?
A: Forstner bits are mostly used in the woodworking industry to drill holes that are larger than those that can be made with ordinary drill bits. While other drill bits, such as spade bits, can perform a similar function, Forstner bits are significantly more precise and produce a clean cut with a flat bottom.
How can you tell if a drill bit is for metal?
Bits designed to drill metal have flutes that taper to a point at either a 118- or 135-degree angle. Bits with a 118-degree point are general-purpose bits, while those with a 135-degree point are self-cleaning, which means they shed shards of metal instead of allowing them to accumulate around the shank.
What color are drill bits for metal?
Usually, drill bits that are for metal can be distinguished by their black color. They are also usually made from tungsten carbide, cobalt or titanium, which should be noted on the packaging if you’re buying new.
What drill bit is used for stainless steel?
Cobalt (HSCO) is considered an upgrade from HSS because it includes 5-8% Cobalt blended into the base material. This is a great option for drilling into harder steel as well as stainless steel grades. Carbide (Carb) is the hardest and most brittle of the drill bit materials.
What is a stepped pilot hole?
Pilot holes remove the excess wood before the screw is inserted, so that when the screw enters the wood, there’s space for it. This makes the wood less likely to crack.
What are the steps to drill?
How to Use a Drill Step 1: Select a Drill Bit. Step 2: Put the Chosen Bit Into the Drill. Step 3: Check All Other Settings. Step 4: Set Up Your Material. Step 5: Drill the Hole. Step 6: Examine the Hole. Step 7: Clean Up. Step 8: Here Is a Short Video Summarizing the Process.
Where is drill doctor made?
We are proud to design and assemble our tools in the USA. You work hard for your money, and your tools are an investment. We are dedicated to creating quality tools with quality components and backing them with the best customer service you’ll never need.
Why can’t I drill into brick?
However, if you have old, fragile brick and you’re mounting a heavy object that requires deep holes and expansion-style anchors, drilling into the brick may not be the best choice. Deep holes weaken the brick and expansion anchors can create enough circular stress to crack the brick.
