Table of Contents
Skateboard wheels are made of a synthetic rubber which is composed of vert small stretchy chains of materials called polyurethane. The stronger the material, the longer and more interconnected the urethane chains.
Are skateboard wheels plastic?
The Skateboard’s Wheels Are they plastic? Skateboard wheels should be made of urethane, not plastic or rubber. Plastic wheels won’t grip the ground, and you will slide out of control.
Why are skateboard wheels made of polyurethane?
Fausto Vitello explained why urethane was perfect for wheels: “Urethane has some unique properties. The first is that it has really good abrasion resistance, which means that the wheel will last a while. The second one, even more important, is that urethane gives a really good grip with the ground.
What is inside skateboard wheels?
Bearings are comprised of a large outer ring and a smaller inner ring. Between these rings are small steel balls. These are what enable the wheels to turn. On either side of the rings are covers, called shields, which prevent the bearings from getting dirty.
What are cheap skateboard wheels made of?
Typically made of polyurethane, skateboard wheels come in a range of sizes, colors, and durability levels to suit your skateboard style and preference. Skateboard wheels are measured by both diameter and durometer. Diameter is the size of the wheel, and durometer is the hardness of the wheel.
Is 100A good for street?
Softer wheels provider more grip, making them a good choice for street skating, but they are slower than harder wheels, which are a better choice for smooth surfaces, particularly skate parks. For example, a skateboard wheel with a hardness of 78a would be considered very soft, while one labeled 100a would be hard.
Is urethane rubber or plastic?
Urethanes fall into the category of materials called rubber. But they’re not quite rubber either. Urethanes fill the gap between rubber and plastic. They’re harder than rubber which contributes to their outstanding load-bearing abilities.
What are urethane wheels made of?
They are made of polyurethane, a versatile and durable synthetic material. According to 1skates.com, Frank Nasworthy invented polyurethane skateboard wheels in 1970. With their rubber-like grip on the pavement, polyurethane wheels expanded the potential of ways that skateboards could be used.
Is polyurethane a good skateboard wheels?
Polyurethane skate wheels are an ideal choice for inline skating boots and wheels. When it comes to skating, our polyurethane skate wheels are relatively indestructible, flexible, resilient and durable.
Do pros use bearing spacers?
Bearing spacers are totally optional; longboarders and casual skaters likely won’t put enough pressure on their boards to ever need them, though they are definitely a good investment if you want to slide, do a lot of tricks, and generally skate hard. For example, 8mm x 10mm is a very common bearing spacer size.
Are 99a wheels soft?
Any wheel in the 78a to 90a range is considered a soft wheel, 90a to 98a is in the middle, 99a+ is referred to as a hard wheel. We recommend choosing hard wheels for skate parks and street skating on ledges, rails, gaps and manual pads. Soft wheels are best for cruising, transportation and longboarding.
Are 54mm wheels too big?
54mm is probably the best all rounder if you are looking at skating a big variety of terrain. This size seems to provide most skateboarders with the perfect blend of speed and acceleration. This really is the Goldilocks zone of wheel size choice.
Are 103 wheels hard?
STF stands for “Street Tech Formula”. With 103A Bones STF Wheels are pretty hard. As the name suggests, the wheels are geared specifically toward street skating. The wheels are very fast and slide-friendly.
What are good skateboard wheels for street?
For most street skating, wheels with a durometer rating of 99a and up are preferred. Harder skate wheels are more responsive, slide easier, and hold speed better on smooth surfaces. They absorb less energy than their softer counterpart, making it preferential for popping and flipping tricks.
What does 78A mean on skateboard wheels?
When it comes to Soft Skateboard Wheels they are usually between 75A and 95A. The most popular hardness or durometer for cruiser and longboard wheels is 78A durometer. 78A wheels have a rubbery, soft bouncy feel that rolls very well over very rough surfaces.
Is 80a a soft wheel?
The higher the number, the harder it is. Softer wheels are 75a – 78a. Wheels rated between 80a to 83a are balanced between soft and hard, giving the rider the freedom of control, speed, and grip. These are popular for freeriding, downhill, sliding.
What are 85A wheels?
A hardness grade of a wheel is stated in “A” (shore hardness). As a rule aggressive wheels are between 85A and 105A. The higher the number, the harder the wheel. Wheels for skating are between 85A und 95A hard.
Do Bones Wheels Flatspot?
They won’t flat spot or wear down fast ! These are the only wheels I would buy. I really like the feel and performance from the Bones wheels I bought a couple months ago and they are the bones icons 52mm withe the OG formula.
Are Bones wheels Made in USA?
Bones Wheels are the most popular skateboard wheels on the market. They are one of the only skateboard companies who still manufactures their products in the USA, which is a pretty cool selling feature. Bones still pour their custom urethane formula in Santa Barbara, California.
Are bones skateboard wheels good?
Conclusion. Without any doubt, the Easy Streets or Street Tech Formula 99A wheels from Bones Wheels are high-quality wheels. The versatility and performance on different surfaces in particular, as well as the flat spot resistance from the Bones Easy Streets skateboard wheels, managed to win me over during the test.
