Table of Contents
Manufactured homes usually use vinyl-on-gypsum (VOG) wall panels rather than standard drywall. Instead of using tape to cover the seams, as is done with drywall, the joints are covered with batten strips during assembly.
What kind of walls are in manufactured homes?
The walls of many manufactured homes are made with materials such as drywall and vinyl-covered wallboard. Drywall is the most commonly used for manufactured home walls, but vinyl-covered walls have their benefits as well¹.
Are there studs in mobile home walls?
Manufactured homes are largely built the same. There are still manufactured homes built with 2”x3” interior wall studs, however. Keep in mind that interior, non-load bearing walls are simply dividing up the interior space of the home and are not structural.
What are old trailer walls made of?
They will be finished with a variety of wall materials. If you’re looking at older mobile homes, you’re likely to find Vinyl on Gypsum (VOG) wallboards, and most new manufactured homes have either Paper on Gypsum (POG) wallboard or finished drywall options.
How are mobile home walls constructed?
Mobile home walls are constructed much like the floors. They consist of a framework, usually in H-shapes, of wooden joists and supports. The space in between these joists forms cavities that are also used for insulation material. Both the interior and exterior of the walls are then covered in panels.
What kind of drywall is used for mobile homes?
The most common type of wall used for a manufactured home is called Vinyl-Over-Gypsum or VOG for short. VOG is drywall that is coated in vinyl wrap. This is different way of treating drywall as compared it being taped, floated, textured & painted.
How do you texture a trailer house wall?
Silica sand and paint mix This is the easiest and most bulletproof way of texturing your mobile home walls. All that you need is to mix some silica sand and paint to the desired consistency. Once that is done you can paint as normal.
How do you hang something heavy on a mobile home wall?
Use interlocking adhesive strips that are designed to hold objects on walls. These strips are two-part hangers that adhere to each other after they are mounted. Place one set of strips on the back of the item you wish to hang. Hold the item to the wall to take note of where you want to place it.
Can you replace mobile home paneling with drywall?
Single-wide mobile homes are designed to be light, but the walls of most of them still contain wooden studs. Manufacturers often cover the walls with 1/4-inch paneling, but the studs can support drywall, so there’s nothing preventing you from removing the paneling and replacing it.
Are mobile home interior walls load-bearing?
Do Mobile Homes Have Load Bearing Walls? Single wide mobile homes do not have load-bearing interior walls, but double wides do. For example, some companies screw the wall studs to the roof studs. A double-wide mobile home is basically two single wides connected to one another by what is called the ‘marriage line.
How do you make a mobile wall look like a drywall?
Walls Remove all trim from the walls. Prime the walls with an oil based primer. Fill in the line gaps in the paneling with drywall mud. Tape and mud the joints between the 4 x 8 sheet of paneling. Spray orange peel texture on the walls. Prime the walls for paint with a latex primer. Paint the walls.
Can you put shiplap over mobile home walls?
Installing shiplap is an easy project which can make the walls of any home, including mobile home walls, have that rustic farmhouse charm that so many loves.
Can you put drywall in mobile home?
Most mobile homes are constructed to give an eight-foot ceiling height, so the drywall sheets should fit between the floor and ceiling. The wall studs are spaced to support 4-by-8 panels, so the mobile home drywall, which comes in 8ft by 4ft sheets, should be no problem to install.
How do you make a mobile home look like a house?
You might have some work making your single-wide home look like a house, but the following strategies can help: Add a garage or outbuilding beside the home. Install a basement and foundation. Upgrade the style to include a higher-pitched roof. Extend the eaves. Add crown molding. Install larger doors.
What are mobile home ceilings made of?
Most mobile homes and older manufactured homes (or lower end, more affordable models) have ceilings made of gypsum instead of drywall. Gypsum is a natural mineral used for blackboard chalk, drywall, and wallboards in mobile homes.
Is drywall too heavy for mobile home?
Drywall that is 5/8″ thick is, of course, a little heavier, at 2.31 pounds per square foot or 73.92 pounds per sheet which is entirely too much for mobile home ceilings.
What are VOG walls?
VOG walls are simply a 3/8” or 1/2” drywall pre-finished in a vinyl coating. These vinyl coatings come in many different patterns and colors, and, depending on the manufacturer, may be pre-selected for installation by the factory or custom selected by the home buyer.
How do you repair a VOG wall?
Manufactured Home Wall Repair Patch Step 1 – Sand lightly around damaged area of wall. Step 2 – Apply spackling compound to back of match. Step 3 – Place patch over damaged area. Step 4 – Spread compound over patch, then let dry. Step 5 – Sand, then apply texture or paint for desired appearance.
