Table of Contents
The outside component of an exterior wall in a mobile house trailer is typically constructed out of one of three different materials: metal, hardboard or vinyl. This part of the exterior wall is the part exposed to the weather. Vinyl is the best siding to keep water from getting inside the wall.
What material is on the outside of trailers?
Travel trailers and recreational vehicles have siding on their exteriors to protect them from environmental elements and to provide insulation to keep the interiors at livable temperatures. The two most common siding materials are aluminum and fiberglass, both of which have benefits and shortcomings.
What are mobile homes framed with?
The most common types of materials used for mobile home wall panels are wood, faux wood, drywall gypsum or vinyl panels. Metal panels are also sometimes used but are more common on the outside of the home. Wall panels might also be kept together using wall strips.
What kind of siding is on a mobile home?
Metal siding is one of the most common types of siding for mobile and manufactured homes and has been the most popular kind of siding for mobile homes until vinyl siding came along. Lightweight and almost indestructible, metal siding is insect-proof and fire-proof.
How thick are the exterior walls of a manufactured home?
Manufactured home wallboards range in thickness from 5/16” to ½”. The 5/16” thickness used to be the most popular measurement for Paper On Gypsum (POG) wallboards, but the majority of new Clayton homes with POG wallboards are now 3/8”.
What material is used for trailer walls?
Most enclosed trailers will use aluminum, steel, galvanized steel sometimes referred to as Galvaneal; or FRP. For wall cross members, steel or aluminum is used. Attached to the cross members is plywood, luan, aluminum or a combination of these. Most commonly used is the aluminum exterior.
Can you put wood siding on a mobile home?
Wood is beautiful but it requires a bit more attention than other siding materials for mobile homes. You can’t beat that beautiful warmth and traditional look that wood siding offers though. Wood makes a great choice for manufactured home siding but it does have issues like rot, water damage, and high maintenance.
Do mobile homes have wall studs?
Manufactured homes are largely built the same. There are still manufactured homes built with 2”x3” interior wall studs, however. Keep in mind that interior, non-load bearing walls are simply dividing up the interior space of the home and are not structural.
Can I put drywall in a mobile home?
Most mobile homes are constructed to give an eight-foot ceiling height, so the drywall sheets should fit between the floor and ceiling. The wall studs are spaced to support 4-by-8 panels, so the mobile home drywall, which comes in 8ft by 4ft sheets, should be no problem to install.
Are there load-bearing walls in a mobile home?
Removing Walls in a Mobile Home – Single Wide In a single wide mobile home, there are typically very few load-bearing interior walls. A manufactured home’s stability and integrity are typically derived from the roof and the weight is carried on the exterior walls, down to the outriggers on the chassis.
Is Hardie board too heavy for a mobile home?
Cement siding panels are heavy and unwieldy when compared to steel, vinyl and aluminum siding. According to the mobile home siding options page on Mobile Home Living.org, fiber cement siding board weights nearly 300 pounds per 100 square feet, which can also make moving a manufactured home a problem.
What gauge is mobile home siding?
It comes in varying thicknesses, ranging from the inexpensive but less durable 40-gauge to the thick and rugged 53-gauge.
How long does vinyl siding last on a mobile home?
Vinyl Siding A lot of vinyl sidings are made to last 20 or more years, depending on the grade installed. You should never need to paint your vinyl siding, and other than occasionally washing dirt off of it, it is generally considered maintenance free.
How do you hang a heavy wall on a mobile home?
Use interlocking adhesive strips that are designed to hold objects on walls. These strips are two-part hangers that adhere to each other after they are mounted. Place one set of strips on the back of the item you wish to hang. Hold the item to the wall to take note of where you want to place it.
What’s the difference in a manufactured home and a mobile home?
The only difference between the two types of homes is the date they were built. According to HUD, a factory-built home prior to June 15, 1976 is a mobile home and one built after June 15, 1976 is a manufactured home.
What are VOG walls?
VOG walls are simply a 3/8” or 1/2” drywall pre-finished in a vinyl coating. These vinyl coatings come in many different patterns and colors, and, depending on the manufacturer, may be pre-selected for installation by the factory or custom selected by the home buyer.
How thick are enclosed trailer walls?
The Common Plywood Thicknesses 1/4″, 3/8″, 1/2″, 5/8″, and 3/4″ plywood are the most common interior wall thicknesses for an enclosed tool trailer. These are nominal sizes, so you may find that your trailer actually has 19/32″ walls instead of a true 5/8″. No biggie.
