Table of Contents
Water treatment coagulants are comprised of positively charged molecules that, when added to the water and mixed, accomplish this charge neutralization. Inorganic, organic, or a combination of both coagulant types are typically used to treat water for suspended solids removal.
What chemicals are used in coagulation?
Traditional chemical coagulation uses aluminum and iron coagulants. The most common aluminum coagulants are aluminum sulfate, aluminum chloride, and sodium aluminate. Iron coagulants include ferric sulfate, ferrous sulfate, ferric chloride, and ferric chloride sulfate [4].
What are the common coagulants used?
The commonly used metal coagulants fall into two general categories: those based on aluminum and those based on iron. The aluminum coagulants include aluminum sulfate, aluminum chloride and sodium aluminate. The iron coagulants include ferric sulfate, ferrous sulfate, ferric chloride and ferric chloride sulfate.
What two chemicals are commonly used as water coagulants?
Aluminum sulfate (alum) is the most common coagulant used for water purification. Other chemicals, such as ferric sulfate or sodium aluminate, may also be used.
How does a flocculant work?
A flocculant is a chemical that can be added to the water to help colloids and any other suspended solids bind together and form heavier particles. The heavier particles then settle to the bottom of the container/tank and the water on the top is drained off.
What does coagulation mean in medical terms?
Coagulation, in physiology, the process by which a blood clot is formed. The formation of a clot is often referred to as secondary hemostasis, because it forms the second stage in the process of arresting the loss of blood from a ruptured vessel.
What are the characteristics of good coagulant?
There are three key properties of a coagulant :
- Trivalent cation : As indicated in the last section, the colloids most commonly found in natural waters are negatively charged, hence a cation is required to neutralize the charge.
- Nontoxic : This requirement is obvious for the production of a safe water.
Is FeCl3 a coagulant?
Ferric chloride (FeCl3) is the most common iron salt used to achieve coagulation. Its reactions in the coagulation process are similar to those of alum, but its relative solubility and pH range differ significantly from those of alum. Both alum and ferric chloride can be used to generate inorganic polymeric coagulants.
What is a coagulant and what is it used for?
Coagulants and flocculation processes are used to remove colloidal impurities: suspended particles such as bacteria, clay, silts, and organic matter from the contaminated water. This produces large flock aggregates that can be removed from the water in subsequent clarification/filtration processes.
What is coagulant explain with example?
Coagulants are a substance which cause particles in a liquid to curdle and clot together. Coagulation treatment chemicals are used in effluent water treatment processes for solids removal, water clarification, lime softening, sludge thickening, and solids dewatering.
How effective is coagulation?
Several studies have reported the effectiveness of dual coagulants application when dealing with various types of wastewater where it can reduce up to 90% of COD, total suspended solids (TSS), turbidity, and colour.
What is coagulant made of?
The most common coagulants are salts of aluminum or trivalent iron, with aluminum being more commonly used.
Why is coagulant added to water?
Coagulant aid Chemicals (typically synthentic polymers) added to water to enhance the coagulation process. if an excess of alum is added so that the dosed water pH is less than 5.0, then the metal ions (Al3+) will directly ˜eutralize the negatively charged organic compounds and colloids in the raw water. 1.
What is the meaning of coagulation?
Coagulation: In medicine, the clotting of blood. The process by which the blood clots to form solid masses, or clots. More than 30 types of cells and substances in blood affect clotting. The process is initiated by blood platelets. The blood cells and plasma are enmeshed in the network of fibrils to form the clot.
What are the 4 steps of water treatment?
These include: (1) Collection ; (2) Screening and Straining ; (3) Chemical Addition ; (4) Coagulation and Flocculation ; (5) Sedimentation and Clarification ; (6) Filtration ; (7) Disinfection ; (8) Storage ; (9) and finally Distribution. Let’s examine these steps in more detail.
What is the most used coagulant?
Iron and aluminium salts are the most widely used coagulants but salts of other metals such as titanium and zirconium have been found to be highly effective as well.
What is natural coagulant?
Natural coagulant is a naturally occurred; plants based coagulant that can be used in coagulation-flocculation process of wastewater treatment for reducing turbidity.
Which two chemicals are commonly used to disinfect water?
The two chemicals used in the disinfection of water are chlorine and ozone.
Which coagulant is used for sewage treatment?
Alum is used in water treatment whereas Ferric Chloride is used in sewage treatment.
Which are two chemicals used to purify water?
Chlorine and ozone are two chemicals used to purify water.
What is flocculant for?
Used in a wide range of industries and applications, flocculants help to remove suspended solids from wastewater by aggregating contaminants into flakes or “flocs” that float to the surface of the water or settle at the bottom. They can also be used for lime softening, sludge thickening, and solids dehydration.
What is the difference between coagulant and flocculant?
Flocculation is synonymous with agglomeration and coagulation / coalescence. Basically, coagulation is a process of addition of coagulant to destabilize a stabilized charged particle. Meanwhile, flocculation is a mixing technique that promotes agglomeration and assists in the settling of particles.
Which chemicals are used in water treatment?
Chemicals that are used are for instance sodium chloride, potassium chloride, citric acid and chlorine dioxide. Chlorine dioxide cleansing serves the removal of organic contaminants on ion exchange resins.
Is alum a coagulant or flocculant?
To accomplish this, the water is treated with aluminum sulfate, commonly called alum, which serves as a flocculant. Raw water often holds tiny suspended particles that are very difficult for a filter to catch. Alum causes them to clump together so that they can settle out of the water or be easily trapped by a filter.
Why is coagulant used?
Coagulation treatment neutralizes the negative electrical charge on particles, which destabilizes the forces keeping colloids apart. Water treatment coagulants are comprised of positively charged molecules that, when added to the water and mixed, accomplish this charge neutralization.
What is difference between coagulant and anticoagulant?
Definition: An agent that produces coagulation (Coagulation is a complex process by which blood forms clots). Definition: An anticoagulant is a substance that prevents coagulation; that is, it stops blood from clotting.
How does a coagulant work?
Coagulants work by creating a chemical reaction, eliminating negative charges that cause particles to repel each other. The action of these bubbles forces clots or flocs of particles to the water surface where they can be skimmed off. Dissolved air flotation is an alternative to sedimentation.
