QA

What Are Bushings On A Skateboard

Skateboard truck bushings are the rubbery rings that fit around the kingpin on your skateboard trucks. Typically made of polyurethane, the bushings assist in allowing your board to turn and pivot smoothly. There should be two bushings on each truck (four total).

Do I need bushings on a skateboard?

Bushings are a very important part of skateboard trucks. Don’t worry though, all skateboard trucks come already equipped with bushings. Manufacturers choose a standard setup, perfectly matched to the trucks, and suitable for the most skaters.

Should I replace my bushings skateboard?

Bushings commonly get worn out over time and start making your trucks floppy and unstable, which can cause you to get a lot of wheelbite. If your bushings are split or crushed on one or both sides, it’s probably worth replacing your bushings so you can get some more responsive turns and less flop.

Do bushings make a difference?

The top bushing on your skateboard truck makes your board turn, the bottom bushing can be adjusted by tightening or loosening the nut to make adjust responsiveness. Loose means better turning but less stability (especially at high speeds) and tight mean more stability but less responsiveness.

Should I get hard or soft bushings?

Softer bushings are easier for your hanger to compress, and therefore it is easier to turn on softer bushings. Harder bushings result in stiffer turns. Importantly, how tight or loose you keep your bushings also effects your skateboard’s turn responsiveness. Harder bushings result in stiffer turns.

How do you break in bushings?

Spend your first few skate sessions either skating on flat ground or basic riding in a mini ramp. Adjust the trucks after a few days of breaking in the new bushings. As soon as your board starts to feel normal—no tightness or awkward pulling off to one side—tighten the trucks as you would normally ride them.

How often should you change skateboard bushings?

It’s a good idea to change your axle and kingpin nuts once a year or after every 6 months if you frequently change your wheels and bushings.

How long do skateboard decks last?

Depending on how often you skate and your style, skateboard decks can last between 2 weeks and 6 months. If you only skate mini ramp a deck can last for years, technical street skaters can destroy a deck within weeks.

What are the signs of bad bushings?

Bushings act as a cushion between parts and control the amount of movement in the joints while reducing road noise, vibration, and harshness. Symptoms of worn bushings are clunking or scraping noises, uneven tire wear, and reduced handling and braking response.

How do I know if my bushings are bad?

When bushings wear, they allow more movement. The driver may feel a shimmy from the front of the vehicle, or hear clunking or rattling noises on rough roads, when turning the wheel or in hard braking. Drivers may also experience poor handling or loose steering.

Are bushings expensive to replace?

The cost to replace a control arm bushing will vary greatly depending on the make and model of your vehicle. The cost for a new bushing ranges between $5 and $150, while the average labor costs are between $100 and $300. This means you’re looking at a total of between $105 and $450 for one bushing replacement.

How do I choose skateboard bushings?

How do I pick the correct bushings for my longboard? 1 Shape. Cones and barrels are the most frequently used terms to describe the shape of a bushing. ” 2 Durometer. Harder bushings provide more resistance (better for larger riders) and softer bushings provide less resistance (better for smaller riders).

How tight should skateboard trucks be for beginners?

Your trucks should be loose enough that you don’t need to tic-tac to get around obstacles while skating around. Skateboard trucks can be set tight or loose, depending on the rider’s preference. That being said, they should be tight enough that the kingpin won’t fall out and loose enough that the bushings don’t burst.

What do bushings do?

Suspension bushings are cushions made of several materials, among them being rubber and polyurethane. They are mounted on steering joints and vehicle suspension to control movement in the joints, absorb road bumps and reduce vibrations and noise.

How do you soften skateboard bushings?

Heat up a pot of water on the stove. Place the bushings in the pot for 10 to 15 minutes. Turn off the heat and remove the bushings while they are still hot. Do not use your hands to pull them out of the water.

Can you over tighten skateboard trucks?

4) Adjusting the Truck Mounting bolts The nuts have a nylon locking feature, but theoretically they could loosen over time. If they do, just tighten them back up. No need to over tighten, you’d want to avoid over embedding the bolt deeply into the board.

What are the hardest skateboard bushings?

Doh-Doh Bushings are made with the highest quality urethane of any skateboard bushing. They are molded with rounded edges, making them even more resistant to chipping. Doh-Doh’s are good for replacing worn out or broken bushings, or for upgrading your stock bushings for a more custom feel.

How long do bearings last skateboard?

How long do skate bearings last? Three things that will trash bearings are 1) Lots of water and 2) Jumping off stuff 3) Sliding. If you don’t skate in the wet, your bearings should last at least a year or two of cruising around, if not longer. If you do skate in the wet, make sure you clean your bearings regularly.

Why is razor tail bad?

For starters, a razor tail causes the deck to lose pop, affecting how high the board gets from an ollie and other flip tricks. If you notice that your board has a razor tail but it’s not affecting your ollies or continuing to chip badly when attempting tricks, then you can keep riding it for a little while.