Table of Contents
How to build a deck: Request permission from your local council. Begin the planning. Decide on the materials. Get all the right tools and supplies for the project. Measure and mark out your deck. Install the stumps and bearers. Install the joists. Lay the decking.
Is it hard to build a deck on your own?
Building a deck is not as hard as you might think, and if you follow some basic guidelines it can be a great DIY project. Decks are built to add living space to a home and every one of them should be built nice and level.
What do you put under decking?
A layer of crushed gravel, with or without plastic or weed barrier cloth, is the best choice for using under a deck. It sheds moisture instead of absorbing it, keeps the area under the deck drier, and won’t decay.
How many hours does it take to build a deck?
A 12 x 24-foot one typically requires two people to complete and will take anywhere from one to three weeks depending on experience and skill level. A professional team can usually have the project done in a week or less.
What is the cheapest way to build a deck?
Choose wood, but carefully: Untreated wood decks are generally the cheapest to install, but don’t forget long-term costs. Wood decks require yearly maintenance and deteriorate quickly if they don’t get it.
What is the hardest part of building a deck?
Hold on tight.
How do you stagger deck boards?
A common method for staggering a deck is to start the first row with a full plank, then cut one-third of the next row’s first board off the end. The row after that has an additional one-third cut off and then repeat when you get back to a full board.
How hard is it to build a deck?
Deck construction is not as hard as you might think, and if you follow some basic guidelines it can be a great DIY project. Decks are built to add living space to a home and every one of them should be built nice and level.
What size wood should I use for decking frame?
Commonly used joist sizes are 2-by-6, 2-by-8 and 2-by-10. For example, when you space joists 16″ apart — which is standard for residential decks — a deck spanning 9 1/2′ would require 2-by-6 joists, a 13′ deck would need 2-by-8 joists and a 16′ deck calls for 2-by-10 joists.
Which way should I lay decking?
The correct way to lay decking boards for most decking is smooth-side-up, with the ridges there to prevent rot and mould.
What is the best base for decking?
Many professional and self-made builders agree that gravel is the perfect material to place under your deck. How can you put gravel as your deck’s base? First, you will need to prepare the installation area and dig a few inches out. Then, you’ll need to cover the area with landscaping fabric.
Can you lay decking on uneven ground?
You can install decks almost anywhere, as long as there is a suitable foundation. While they are easiest to install on level grounds, you can also build them on sloped or uneven terrain.
How much should labor cost to build a deck?
Labor costs will total just about two-thirds of the total project cost. With contractors charging, on average, about $35 per square foot. For an average deck size between 200 and 500 square feet, you can expect to pay out between $7,000 and $17,000 just for installation and labor.
How much would a 16×16 deck cost?
16×16-foot Raised Deck: You can buy the materials for a 16×16-foot (256 square foot) deck using composite decking materials for about $5,600-$9,800 and build it yourself. A contractor would charge closer to $7,800-$15,700 to construct a deck of this kind.
How do I estimate the cost of a deck?
The average cost to build a deck is $25 per square foot with most homeowners spending between $4,380 to $10,080 total. An entry level deck with basic materials costs $15 per square foot, while a deck built with premium materials costs $35 per square foot.
How much wood is needed for a 12×12 deck?
A 12 -by-12-foot deck will need 144 lineal feet of decking. The amount of individual boards will depend upon the size and type of decking your choose and the amount of space you plan to leave between decking boards.
How much does a 12×12 deck cost?
A 12 x12 deck can range in cost from $2 200 to $13 000, but the average will be $6 000. Costing $40 a square foot but can be as little as $15 or as high as $85, depending on the deck’s features. A pressure treated deck is the most economical, with composite being the more expansive option.
How can I save money building a deck?
The Top 8 Ways to Save Money Building Your Deck Choose the Right Type of Deck. Make an Efficient Deck Design. Low-Cost Materials vs Maintenance-Free Materials. Shop for the Deck Sales. Off-Season Building to Save Bucks. Buy Fasteners and Hardware in Bulk. DIY Build for Definite Savings. Seal Your Deck.
Can I build a deck without digging holes?
Yes. It’s possible to build a deck without digging holes. This type of deck is called a floating deck, and it sits right on top of the ground without any posts or support areas that you’d dig down into the ground [to secure].
Can I use deck pier blocks instead of footings?
Pier blocks can be used instead of footings for a ground-level deck not requiring permits. Piers blocks can also be used if the frost level depth is less then the height of the pier block.
What is the proper spacing for deck joists?
Deck joist spacing should never exceed 16″ on center (with the exception of MAX deck boards, which allow for maximum 24″ on center). For a more rigid feel, 12″ or less may be preferred. If adding additional framing, be sure to keep all boards level and in plane across the tops.
Is it OK to stagger deck boards?
Staggering the deck boards decreases the number of screws or nails going into one joist, which can weaken or rot the joist more quickly. Staggering the joints strengthens the deck by spreading the seams across more joists instead of placing the stress on only one.
Do I stagger decking?
Composite decking should not be staggered on a deck. Staggered decking requires butt joints, but composite decking expands and contracts with temperature changes making butt joints unsightly. It is better to design a composite deck with intentional design elements to avoid staggering boards for a wider composite deck.
