Table of Contents
Because the wall tile should hang over the floor tile, it can be more complicated to install tile on the wall first. However, starting your project with tile installation on the walls first can help you to avoid unfortunate messes and damage related to mishaps with the mortar and tile.
Should I tile the floor or walls first?
Whilst you can tile either one first, popular opinion based on experience is that is is easier to tile the walls first and then the floor, if you are tiling both in a room. This ensures that you keep the floor tiles cleaner as you won’t be doing so much work around them once they are installed.
In what order do you tile a shower?
It certainly can change from job to job, but a shower order for me is to use a ledger and tile the entire wall, minus the bottom row. Then the floor tiles. Finally, come back and fit the bottom row of wall tiles. Doing the floors after the walls helps in accidental damage (like Paul said).
Can tiles be too heavy for a wall?
9 Answers from MyBuilder Tilers The maximum weight of tiling which can be supported by a dry, well-adhered plaster background is 20kg/m². This is equivalent to ceramic tiles with a maximum thickness of 8mm plus tile adhesive or natural stone tiles with a maximum thickness of 7mm plus tile adhesive.
Do you start in the middle when tiling?
It’s always advisable to start tiling your grid in the centre of the wall, as it’s easier to make sure your pattern is symmetrical. It also means any half-tiles you may need can go at the end of each row and will be of matching size.
Do I need to waterproof shower walls before tiling?
Contrary to popular belief, ceramic tile and grout, by themselves are not waterproof. Water can penetrate through cement-based grout and work its way through the substrate. To prevent water damage, you must install a waterproof membrane just below the tile bonding mortar as close to the tile as possible.
Which wall do you tile first in shower?
Always tile the back wall first in a shower/tub so that you can hide the grout joints on the sides.
Should bathroom tiles be vertical or horizontal?
Lay bathroom wall tiles vertically when you want your room to look taller. If you have a low ceiling but a wider floor space, you may like to choose this option to open up your space vertically. Use large format tiles instead of many small tiles, as having many grout joints can make the space feel more cramped.
How much space should be between floor and wall tile?
The Tile Council of North America recommends at least a quarter-inch gap between the tile floor and the walls. Never fill this gap with grout, because tile grout is not flexible. Instead, fill it with an elastic material capable of sustaining the movement of the floor and the movement of the wall.
How far up the wall should you tile?
The classic design feature is usually between 34 and 54″ high, with 36″ being the average height. A classic offset or straight set pattern in a standard field size tile works best for this wall height. For a truly classic look, finish the top with a decorative trim or a bullnosed edge.
Can you use the same tile on floor and shower walls?
You can go any number of directions when matching wall and floor tiles. You aren’t limited to using identical tiles on both surfaces, although doing so creates a striking effect. Here are some tried-and-true ideas for creating gorgeous matching tile looks for your bathroom or kitchen.
Can you lay tiles without gap?
Laying tiles with small gaps also prevents problems in case of mechanical damage to one of them. If the tiles were indeed laid out without joints, it would not have been possible to safely remove one of them. 1.5 to 2-millimetre gaps are enough for safely replacing a tile without damaging the other ones.
When tiling a shower do you start at the top or bottom?
Don’t start with a cut tile on the bottom, start on the next row up with a full tile. If one of your tile is slightly undersize it will throw everything out of line. Always start at the bottom and not at the top because they are heavy.
Do you tile from top to bottom?
Theoretically, tiles to be laid from top to bottom but practically it becomes impossible due to above reason. So, tiler feels easy to lay it from bottom. Tiles of full size on walls looks good, lay tiles of full size in multiple numbers, do not cut the top layer tile to meet the certain height.
Should you tile from top to bottom?
Don’t start with a cut tile on the bottom, start on the next row up with a full tile. If one of your tile is slightly undersize it will throw everything out of line. Always start at the bottom and not at the top because they are heavy.
How do you fix a gap between a wall and a floor?
If you’re fixing a gap between a floor and a painted wall, such as a bedroom or living room wall, use a latex caulk. Choose a color that closely resembles the paint of your wall so the gap isn’t noticeable. Look for latex caulk at department stores, home improvement stores, hardware stores, and online.
Should you tile all walls in a small bathroom?
Tile size shouldn’t be determined by bathroom size, despite what you may hear. A small bathroom can actually benefit from a large tile. With fewer grout lines the walls and floor are less cluttered and the room visually expanded.
Should you tile behind a toilet?
The bathroom fitters are unanimous—if you’re looking for a high quality finish, with a better seal against water damage, then always tile the floor first. The floor will be sealed a lot better with the tiles being laid under the toilet. 2. It is also easier to do this rather than trying to cut tiles around the toilet.
Does a bathroom need to be fully tiled?
Fully tiling your bathroom is a great way to make it classy, more formal, and very clean cut. There are several different ways you can personalize with different kinds of tile. Keep in mind that if your walls are covered in tile, you may have a more difficult time doing things like hanging pictures.
