Table of Contents
Asphalt driveways should be resealed about once every three years to maintain their appearance and protect them from cracks and oil damage. As with concrete, finish the repairs, allow time for curing and clean before sealing.
How often should I seal asphalt driveway?
Typically, sealcoating is recommended every 3 years to provide adequate pavement protection as well as attractive curb appeal for your commercial property or home. Your SealMaster pavement professional can provide the best possible pavement maintenance plan for your unique situation.
How long does driveway sealer last?
Seal coating can last up to three years if your pavement is in great shape, however, older asphalt may need to be resealed annually.
Is sealcoating driveway worth it?
Sealcoating helps protect the underlying pavement from air, sunlight, salts, and petroleum products. It also prevents water from turning hairline cracks into bigger ones. The aggregate in the mix enhances traction, acts as a wear layer, and fills small cracks. Also, sealcoating gives the driveway a uniform black color.
How long should you wait to seal new asphalt?
If you’ve recently installed a new driveway, wait at least 90 days to a year to ensure the sealant doesn’t damage the asphalt. Sealcoating a new driveway too early may trap oils within the asphalt, resulting in a driveway that is too soft or flexible. Sealcoat your asphalt driveway when the temperature is 50–90°F.
What time of year is best to seal driveway?
Spring Is The Best Time To Seal Coat Your Asphalt It means your driveways and parking lots look great for the entire year, and warm spring weather is the perfect temperature for a well-set coat. Plus, a fresh seal coat is easily damaged by winter machinery, like snow plows.
Is it good to seal your driveway?
By regularly applying a quality driveway sealer to your concrete you can prevent water, sunlight, and air from permeating your asphalt and prevent these problems. As an added benefit, driveway sealing also repels oil spills and leaks and makes it much easier for you to sweep and clean your driveway surface.
What happens if you drive on seal coat too soon?
If you drive on your sealcoating too soon, your tires will break through the dry crust and leave ruts, grooves, and tire marks in the soft sealcoat below. Sealcoating dries from the top down—asphalt sealer that appears dry may still have a wet layer below the surface.
Is sealcoating worth the money?
Sealcoating will protect against fading, and can even improve the appearance of your asphalt. It will restore the lustrous appearance of the asphalt, even if some natural fading has occurred. It will also fill all of minor surface flaws, giving the pavement a smooth and even appearance.
How long does it take for asphalt to cure?
Since asphalt needs time to harden and cure, usually 6-12 months, your parking lot or driveway will remain soft and pliable until then. You may walk on the new pavement immediately, but keep automobile traffic off of it for at least 3 full days and longer in hotter temperatures.
Should I get my asphalt driveway sealed?
Asphalt driveways should be resealed about once every three years to maintain their appearance and protect them from cracks and oil damage. As with concrete, finish the repairs, allow time for curing and clean before sealing. Asphalt sealer comes in 5-gallon drums that sell from about $8 to $20.
Do driveway sealers need two coats?
Most driveway sealer manufacturers recommend two coats with a minimum drying time of eight hours between coats, so this driveway sealing project will fill an entire weekend.
How much driveway sealer do I need?
Divide the square footage of the driveway by 80 to find the number of gallons of sealer you need for one coat. Each gallon covers about 80 square feet and each bucket of sealer contains 5 gallons. Divide the number of gallons by 5 to find the number of buckets you need, reveals MV Organizing.
Is oil based driveway sealer better?
Unlike water-based driveway sealers, oil-based varieties have a longer cure time and distinct odor that is quite strong and often lingers in the air for days after the sealing is complete. Oil-based sealers also contain VOCs, or volatile organic compounds, which pollute the environment.
What is the best temperature to seal a driveway?
What’s the best temperature to seal a driveway? The ideal conditions for application are during the day when pavement and ambient temperatures are at least 50°F and rising, and no rain is forecasted for 24 hours. If these recommendations are not followed, the procedure will not yield desired results.
How long stay off sealed asphalt?
How long do I have to stay off the driveway after it is completed? Upon completion, we recommend to keep vehicles off for a minimum of 48 – 72 hours. You may walk on the driveway after 24 hours.
Should new asphalt be sealed?
When it comes to value, there is no better choice. However, you don’t need to seal a new driveway. It is important to allow the asphalt to fully cure. In fact, it is not unusual to wait for between 6 to 9 months before applying a seal coat, especially if your driveway was installed in the fall.
Does sealcoating extend life?
Sealcoating protects and prolongs the life expectancy of asphalt pavement by filling surface damage and providing a protective layer to keep out damaging UV rays, vehicle fluids, and water. A properly maintained and sealed asphalt surface has an extended lifetime and reduces long-term repair costs.
Can I mix sand with driveway sealer?
Add 10 to 15 pounds of sand (2 to 3 pounds per gallon) to the sealer. Mix it in thoroughly, using a paint stick or metal rod. Begin resealing the driveway. Stir the mixture occasionally to keep the sand properly mixed.
