Table of Contents
Is Thompson Water Seal a good product?
– Thompson’s® WaterSeal® is a very inexpensive product to purchase and coverage is exceptional. Unfortunately the saying “you get what you pay for” applies here as the Thompson’s® WaterSeal® offers no UV protection whatsoever. – After 2 years the entire deck was covered in black mold.
Is Thompson Water Seal Safe?
This product is 100% ec-friendly and will not harm pets.
Is Thompson’s Water Seal stain and sealer good?
Thompson’s WaterSeal has clearly not been a consumer favorite with deck stains or sealers. Mainly as it does not offer any UV protection and it grays in a few months. The Transparent and Semi-Transparent versions are prone to premature peeling and wearing after about 1 year.
How often should you use Thompson Water Seal?
Thompson’s WaterSeal includes a complete line of deck sealers and stains for protecting deck wood from moisture and sunlight. Applying a sealer and/or stain typically is recommended every one to three years, depending on the finishing product, deck use, weather conditions, and sun exposure.
How many coats of Thompson water Seal do I need?
One coat is enough, but if more color is desired, a second coat can be applied within two hours before the first coat has dried. With Thompson’s® WaterSeal® Waterproofing Stains, you can clean your tools with soap and water.
What is the best way to apply Thompson’s Water Seal?
The fastest way to apply is with a pump-up sprayer (using a coarse setting), but you can also apply with a brush or a roller. You should apply liberally. In the case of areas with heavy discoloration or dirt, apply a second coat, brush lightly with a broom and hose off.
How long does Thompson’s water Seal last?
If applied correctly, Water Seal will last up to 4 years.
How do I dispose of Thompson’s water sealer?
CONTAINER DISPOSAL: Triple rinse (or equivalent). Then offer for recycling or reconditioning, or dispose of in a sanitary landfill, or by incineration if allowed by state and local authorities.
Is Thompsons water Seal safe for garden beds?
Yes, you can use the Thompson’s if you wish but it is a fair amount of added expense and work for little gain. You will get some leaching of its chems into the soil in the first year so don’t plant root crops right up next to it. use a mix of ingredients – compost, composted manures, local dirt, etc.
Should I use Thompson Water Seal on pressure treated wood?
Although the wood is resistant to rot and insect attacks because of the pressure treatment, it can warp, split and develop mildew if not protected from the effects of water. The directions for some, such as Thompson’s Water Seal, specify pressure-treated wood as a suitable use.
What is the best wood sealer?
According to them, these are the nine most effective wood sealers: Thompson’s Water Seal. Rainguard Premium Wood Sealer. DEFY Crystal Clear Sealer. Anchorseal 2. Roxil Wood Protection Cream. Eco-Advance Exterior Wood Waterproofer. Ready Seal Stain and Sealer for Wood. Pure Tung Oil Natural Wood Sealer.
What if it rains after sealing deck?
Rain will damage the finish of any wet sealer with linseed oil or mineral oil in it. Because it forms a coating, it takes several hours to dry, and during that time, the sealer is vulnerable. After the rain has passed and the deck has dried, take a closer look.
Can you use too much Thompson Water Seal?
If over-application occurs and there is puddling of the product, redistribute product within 15 minutes to a dry area or wipe off. Q: Will the formula of Thompson’s® WaterSeal® Sport Seal® or Fabric Seal change the feel of the treated surface? No. These products will not change the surface’s feel or leave it sticky.
Is it better to stain or water seal a deck?
Sealing a deck is best for cedar, teak, mahogany, or other quality woods as it enhances the wood grain and natural color. Staining a deck protects the wood from mold, mildew, moisture, and rot, and UV rays and sun damage.
Can I apply Thompson’s Water Seal with a sprayer?
Answer: The manufacturer of Thompson Water Seal recommended that you use their product with a plastic sprayer with a brass wand, such as our Chapin Premier sprayer. Once you are done with the product, it is recommended that you run mineral spirits through the sprayer and then water to clean it.
How many coats of water seal do I need?
Apply 2 coats using brush,roller or sprayer. note: Use at full strength.do not dilute. The second coat should be applied when the first coat has soaked in the surface. For best results do not leave the first coat to dry for more than 1 hour before applying the second coat.
How much does Thompson’s Water Seal Cover per gallon?
That determines how many gallons of stain are required (each gallon covers up to 400 square feet).
What temperature do you apply Thompson’s Water Seal?
Be sure that both surface and air temperatures are above 50°F during application and remain above 40°F for 48 hours after application. Do not apply product if rain is forecasted within 24 hours of application.
How do you clean your brushes after using Thompson’s Water Seal?
After waiting the recommended time, use a synthetic, stiff bristled brush to scrub the surface. Then use a garden hose or pressure washer to rinse away the residue.
How do you remove Thompson’s Water Seal?
Steps to Remove the Sealant: To use mineral spirits, wipe the spirits over the area with a cloth. Let it sit for a few minutes, then scrub the area with a scrub brush. To use a concentrated degreaser, follow the instructions on the label of your selected product.
What is Thompson Water Seal used for?
Thompson’s® WaterSeal® Penetrating Timber Oil is an oil-based product that provides protection by penetrating into wood pores and sealing out water infiltration. Thompson’s® WaterSeal® Waterproofing Stains are water-based products that have film-forming properties to protect the wood by repelling water.
How do I dispose of old varnish?
If you have more than half a can of varnish left, you could pour the varnish into a trash can or a lined box. Make sure the can or box is larger than the varnish can. After that, you can transfer the kitty litter into the trash can or lined box.
Can you throw away empty stain cans?
If the cans from your oil-based paint or stain products are empty, put them into your regular trash.
