Table of Contents
Thompson’s® WaterSeal® Penetrating Timber Oil is an oil-based product that provides protection by penetrating into wood pores and sealing out water infiltration. Thompson’s® WaterSeal® Waterproofing Stains are water-based products that have film-forming properties to protect the wood by repelling water.
Is Thompson Concrete Sealer water based?
We’ve always used Thompson’s water sealer on our deck. It’s very easy to apply, you can’t make a mistake using this product and it will make your deck last forever! This time we noticed the product has a white milky color, it’s always been clear. It turns out the product is now water based, no longer solvent based.
Can I use Thompson’s Water Seal over oil based stain?
And actually, the answer is YES—you can use our EMTECH water-based sealer or top coat over the oil stain.
Is Thompson’s Water Seal latex?
Thompson’s WaterSeal Total All-in-One Stain and Sealer Semi-Transparent | Total All-in-One Semi-Transparent This unique latex & oil blend beautifies and revives the wood’s appearance, while waterproofing with a film-forming barrier. Solid opacity adds he most color and shows the least amount of wood grain.
Is Thompson water Seal any good?
– Thompson’s® WaterSeal® Clear did not alter or change the appearance of the wood. After full drying, we tested the ability to repel water. Water did bead on top of the finish and did not absorb into the wood. – As far as we can tell, Thompson’s® WaterSeal® does not prevent UV graying at all.
How long does Thompson water Seal last?
If applied correctly, Water Seal will last up to 4 years. This is dependent on conditions such as orientation of the wall and local climate.
Is it possible to use a water based finish over an oil based stain?
QUESTION: Can oil and water based products be used over each other? ANSWER: Yes! but the underlying finish has to be absolutely dry. When using a water based topcoat over an oil based stain, allow oil based finishes, such as Java Gel Stain, to dry at least 72 hours before coating with a water based topcoat.
What can I put over Thompsons Water Seal?
You can only paint over Thompson’s Water Seal if you wait 45 days and use a primer. This only works if you paint over concrete, but paint doesn’t always stick to the Thompson’s seal well. Your paint may not look as intended because Thompson’s Water Seal has hydrophobic tendencies.
Can you put a water based clear coat over oil based stain?
The instructions on the can will indicate that you can apply a water-based clear coat right over an oil-based stain if the stain has thoroughly cured. However, the curing time can be several days, especially with an open-grain wood such as oak where the stain can sit uncured deep in the pores.
What is the best way to apply Thompson’s water Seal?
The fastest way to apply is with a pump-up sprayer (using a coarse setting), but you can also apply with a brush or a roller. You should apply liberally. In the case of areas with heavy discoloration or dirt, apply a second coat, brush lightly with a broom and hose off.
How many coats of Thompson water Seal do I need?
One coat is enough, but if more color is desired, a second coat can be applied within two hours before the first coat has dried. With Thompson’s® WaterSeal® Waterproofing Stains, you can clean your tools with soap and water.
What is the difference between staining and sealing a deck?
A deck sealer is typically a clear or transparent finish that either penetrates into the wood or forms a clear film on top. A deck stain has the same water-resistant qualities that a deck sealer does. A deck stain, however, has added pigment or tone, which gives the stain some color.
Should I use Thompson Water Seal on pressure-treated wood?
Although the wood is resistant to rot and insect attacks because of the pressure treatment, it can warp, split and develop mildew if not protected from the effects of water. The directions for some, such as Thompson’s Water Seal, specify pressure-treated wood as a suitable use.
What is the best sealant for pressure-treated wood?
Best Deck Sealers for Pressure-treated Wood Ready Seal 520 Exterior Stain and Sealer for Wood. SEAL-ONCE Nano+Poly Ready Mix Penetrating Wood Sealer. #1 Deck Premium Semi-Transparent Wood Stain for Decks. Thompsons Waterseal Solid Waterproofing Stain. Eco Advance Wood Siloxane Waterproofer Concentrate.
Does Thompson’s Water Seal prevent termites?
Answer: Bora-Care is great for the termite issue in your fence, but when applied outside it is very important to seal the treatment by using a sealant material, like a Thompsons water seal. Bora-Care can only be applied to raw wood and after it is applied to wood outdoors it must be sealed.
How often should I apply Thompson’s Water Seal?
Thompson’s WaterSeal includes a complete line of deck sealers and stains for protecting deck wood from moisture and sunlight. Applying a sealer and/or stain typically is recommended every one to three years, depending on the finishing product, deck use, weather conditions, and sun exposure.
Can you use too much Thompson Water Seal?
If over-application occurs and there is puddling of the product, redistribute product within 15 minutes to a dry area or wipe off. Q: Will the formula of Thompson’s® WaterSeal® Sport Seal® or Fabric Seal change the feel of the treated surface? No. These products will not change the surface’s feel or leave it sticky.
What temperature can you apply Thompson Water Seal?
Be sure that both surface and air temperatures are above 50°F during application and remain above 40°F for 48 hours after application. Do not apply product if rain is forecasted within 24 hours of application.
Can I paint water based over oil?
Using water-based or acrylic paint when painting over oil-based paint is likely to cause peeling or chipping because those formulas don’t bond well with the naturally glossy surface of oil-based paint. Fortunately, with the proper approach, you can successfully use water-based paint over oil-based paint.
Is oil based polyurethane more durable than water based?
Oil based polyurethane lasts longer than water based. There is no contest on the durability between the 2 options. Water based poly is thinner, and you often need 4-5 coats to equal the durability of 3 coats of oil based.
How do you tell if Deck is oil or water based?
Oil based stains are somewhat more water resistant than the water based finishes. Due to this, by sprinkling a little water onto the stained area you can tell if the stain is water or oil based. Simply wait for a minute and see if the water beads up. If it does, then you have an oil based stain.
