Table of Contents
You can also use Pine-Sol® Original Squirt ‘N Mop®. It’s safe for wood and hard nonporous surfaces like ceramic and porcelain tiles, and also sealed granite. You can apply this product directly from the bottle over a 3′ x 3’ area and start mopping. To finish, use a clean, damp mop to wipe the floor clean.
Can I mop with Pine-Sol?
Mix 1/4 cup of Pine-Sol® Multi-Surface Cleaner with one gallon of warm water. Mop your floor with the mixture. But, first wring out the mop so it’s just damp, not soaking wet. After mopping, rinse your mop in fresh, clean water and wring it out so it’s just damp.
Do you have to rinse Pine-Sol off floors?
A: Yes. Usually no rinsing required. On wood surfaces, do not allow puddles of cleaner to remain. *Not recommended for use on unfinished, unsealed, unpainted, waxed, oiled or worn flooring.
Is Pine-Sol good for all floors?
Pine Sol is good for cleaning hardwood floors but only if they are finished or sealed with a protective coat. It is safe to use it even on engineered wood floors but can cause damage if the floor is worn out, oiled, or waxed.
What is the best thing to use when mopping?
Mild dish soap can work well as a floor cleaner, and since it is so mild, it can be used on most floor types without leaving a residue. Don’t overuse it, though—too much will create a slightly sticky film. Here are two different recipes to try: Mix 1/4 cup mild dish soap and 3 cups warm water.
Which is better Pine-Sol or Fabuloso?
Among them, Pine-Sol was the clear winner, scoring 74 out of 100 point with high marks from removing soap scum, lack of streaking and cleaning heavily soiled surfaces. Fabuloso, by contrast, got horrendous marks on soap scum, streaking and soiled surfaces, but at $2.10 it only costs a third of what Pine-Sol does.
How do you mop a Pine-Sol floor?
Pine-Sol is a gentle cleaner and the best way to clean linoleum floors. Dilute ¼ cup Pine-Sol ® to a gallon of water. Wipe those dirty floors down with the solution using a mop or sponge. Scrub tougher stains and scuffs with full-strength Pine-Sol ® and a scrubbing brush, then rinse with water.
Why does Pine-Sol make my floor sticky?
A common mind-set in the cleaning industry is that the more cleaning chemical the cleaner the floor, but this is not the case! Floor cleaning chemicals are designed to be effective at a specific dilution. The build-up of excess chemical is one of the main reasons why your floor is left feeling sticky or tacky.
Is Pine-Sol toxic to breathe?
Pine SOL isn’t meant for your respiratory system This is due to the corrosive nature of some of the chemicals that make up Pine SOL. The effect these chemicals can have upon inhalation can vary wildly from individual to individual.
Can you mix Pine-Sol and vinegar to clean?
“Fill up the sink with hot water & a cap full of your favorite Pine Sol floor cleaner. Add 2 tbsp of vinegar & use to clean any type of floor. I use this method on my hardwood floors to get a clean, smooth & shiny surface!”.
How much should I dilute Pine-Sol?
Dilute ¼ cup of Pine-Sol® in one gallon of warm water. Dip a sponge in the mixture to wipe grease and grime away. Or for everyday mess control, keep the Pine-Sol® mixture in a spray bottle for quick cleaning spritzes. Scrub crevices in counters with grout with an old toothbrush.
Does Pine-Sol make floors shine?
Pine Sol basically reinforces the finish on your laminate floor, leaving it looking shiny and sparkling clean. This is unlike most cleaning formulas that contain harsh ingredients that actually strip off the finish shine and leave the floor looking dull. So yes, Pine Sol does make laminate floor shine.
Do flies really hate Pine-Sol?
Flies seem to HATE pine-sol. To make the fly repelling spray, mix the original Pine-Sol with water, at a ratio of 50/50 and put it in a spray bottle. Use to wipe counters or spray on the porch and patio table and furniture to drive the flies away.
Does mopping actually clean?
Here’s the thing – mops don’t really clean by any scientific standard. They aren’t even designed to remove unwanted matter. In fact, according the American Society of Microbiology, a brand new microfiber mop removes only about 50 percent of surface bacteria. Then its effectiveness diminishes with each subsequent use.
Can you mop with just water?
It is rarely appropriate to use plain water to clean floors because science has shown that the use of proper diluted chemicals are effective at breaking the sticky bonds that hold oily soils to floors.
Why are my floors still dirty after mopping?
2 REASONS YOUR FLOORS ARE STILL DIRTY AFTER CLEANING Many cleaners spray a ton of floor soap, believing “wet equals clean”. Continuing to use the mop pad on the floor leads to smearing dirt, not lifting it. The end result, dirty water dries back onto the floor.
Can you mix Pine-Sol and Dawn dish soap?
A: No. Pine-Sol® products should not be used on dishes.
Is Lemon Fresh Pine-Sol a disinfectant?
It disinfects and kills 99.9% of germs including Salmonella enterica, Staphlyococcus aureus, and Influenze A virus. You can use Pine-Sol Multi-surface cleaner on hard, nonporous surfaces including floors, sinks, counters, bathtubs, shower stalls, tile and more. That’s the power of Pine-Sol.
Is Pine-Sol Lavender a disinfectant?
Our scented Pine-Sol® multi-surface cleaners, including Lemon Fresh®, Lavender Clean® and Sparkling Wave®, are powerful cleaners and deodorizers that cut through tough grease, grime and dirt, but don’t disinfect.
Can I mop with Pine-Sol and bleach?
The Association of Residential Cleaning Services, International (ARCSI) says bleach should never be mixed with the following: Pine-Sol: If you mix bleach and Pine-Sol in large amounts, it will create chlorine gas.
What is Pine-Sol used for?
You can use Pine-Sol® cleaners on hard, nonporous surfaces, including floors, sinks, counters, stoves, bathtubs, shower stalls, tile and more!.
Is Pine-Sol safe for vinyl?
Suggested Cleaning Products for Vinyl Flooring For deep cleaning, choose products carefully. Avoid “mop and wax” cleaners. Pine Sol, Pledge, and Armstrong all make cleaning products specifically for vinyl flooring.
