Table of Contents
What IS IS 10748?
According to IS 10748:2004 This Product Manual shall be used as reference material by all Regional/Branch Offices & licensees to ensure coherence of practice and transparency in operation of certification under Scheme-I of Bureau of Indian Standards (Conformity Assessment) Regulations, 2018 for various products.
IS 10748 steel?
Buy IS 10748 GRADE 1 Hot Rolled Coil, Mild Steel-Flat Product at the cheapest price. IS 2062 are low carbon steel they offer good formability, weld ability and machinability.
IS 10748 Grade4 chemical composition?
Chemical Composition Of IS 10748-2004 0.10% (Max.) 0.50% (Max.) 0.040% (Max.) 0.040% (Max.)Jan 24, 2021.
Is 1079 a material standard?
This standard covers the requirements for hot rolled low carbon steel sheets and strips, including micro-alloyed steel intended for forming, drawing and general engineering purposes. ‘ supplied either with mill edges or flattened and sheared edges.
Is 513 a material property?
When the steel is aluminium-silicon killed, the silicon content shall not be less than 0.03 percent and total aluminium content shall not be less than 0.01 percent. 3 The nitrogen content of the steel shall not be more than 0.007 percent. However for CR0 and CR1, the nitrogen content shall not exceed 0.012 percent.
Is 1161 a pipe specification?
The IS 1161 YST 210 / 240 / 310 Carbon Steel Pipes & Tubes, is 1161 material specification includes sizes 20mm x 20mm TO 400 x 400mm, Wall Thickness : 0.5mm – 25mm, Length : 6.0 m ± 0.05 m Customized length ranging from 6 m to 11 m, Seamless, Welded or ERW type, Thickness All sizes +/- 10%, length Min 3 Meters, Max18.
Is 1730 a steel?
1.1730 is a medium carbon unalloyed tool steel grade offering reasonable tensile strength.
Is 4923 a standard?
This Indian Standard (Second Revision) was adopted by the Bureau of Indian Standards, after the draft finalized by the Steel Tubes, Pipes and Fittings Sectional Committee had been approved by the Metallurgical Engineering Division Council. This standard was first published in 1968 and was revised in 1985.
Is 2062 a grade?
IS2062 is a product standard of Bureau of Indian Standards. It specifies standards for Hot-Rolled Medium and High Tensile Structural Steel. Element Carbon Steel IS 2062 Tensile StrengthMin, Mpa 410 Yield Stress (>40 mm) 230 % Elongation at gauge length 5.65 √Ѕo 23 min Bend Test (min) 3t* (*t is 3 times thickness).
Is 11513 a standard?
This standard covers the requirements for hot-rolled carbon steel strips having carbon content up to a maximum of 0.25 percent and intended for cold rolling. 3.1 General requirements relating to the supply of hot-rolled carbon steel sheets and strips shall conform to IS 8910.
Is 2062 a material?
IS 2062 is also a standard which is compulsory for a manufacturer to have in India to produce Hot Rolled Steel for Medium and High Tensile Structural Purpose. Grade IS2062 Grade E250A Order Minimum order 3MT per size Length 3 To 6 Meters, Custom Cut Length or multiple Diameter 25 mm to 80 mm.
Is steel a standard?
IS: 1871 provides a commentary on IS: 1570 and it regroups the steels given in IS: 1570 as follows: (a) Steel specified by tensile properties but without detailed chemical composition. (b) Carbon and low alloy steels with specified chemical composition and related mechanical properties.
What is d513 material?
CRCA IS 513 CR 2 Sheets Grades Carbon Manganese Ordinary (O) 0.15 0.6 Drawing (D) 0.12 0.5 Deep Drawing (DD) 0.1 0.45 Extra Deep Drawing (EDD) 0.08 0.4.
Is 226 a material specification?
This standard was formerly known as IS 226. Now IS 2062 has replaced this specification. This grade is for “Steel for general structural purposes”. This grade is also commonly known as IS 2062 – GRE 250(Fe – 410 – W)A, broadly, specifications of this grade Fe gllow A are as under.
Is 2002 a material specification?
The IS 2002 alloy is the chemical composition of the elements such as carbon, silicon, phosphorus, sulfur. Width 1000mm-4500mm Length 3000mm-18000mm Impact tested -52° C Material Pressure Vessel Steel / Boiler Quality Process of Manufacturing Hot-Rolled (HR).
What is a 513 grade equivalent material?
CR2 is a drawing quality “D” grade as per Indian standard: 513 2008 specifications. CR3 is a deep drawing Quality “DD” grade as per Indian standard: 513 2008 specifications. CR4 is an extra deep drawing quality “EDD” grade as per Indian standard: 513 2008 specifications.
Is 277 Galvanised sheet specification?
This standard covers the requirements of plain galvanized steel sheets and strips (coils) and corrugated galvanized sheets. The general requirements relating to the supply of galvanized sheets and strips shall conform to IS 8910.
Is code a Galvalume sheet?
(a) IS:277 & IS:513 – Specification for galvanized steel sheets (plain and corrugated). (b) AS-1397 – Galvalume sheet coating.
Is 1161 a material property?
This standard covers the requirements for hot finished welded (HFW), hot finished seamless @IFS), and electric resistance welded (ERW) or high frequency induction welded (HRIW) plain carbon steel tubes for structural purposes. The Indian-Standards listed below are the necessary adjuncts to this standard: IS No.
Is 4923 a material property?
IS 4923 material specification & equivalent grades are DIN: 2440, 2441, BS: 1387, S: 3589, 1239 (Pt-I) and ISO: 65. Due to their properties, steel pipes made from IS 4923 YST 310 are designed to function exceptionally well under high pressure and high temperatures.
Is 1239 Part 1 A material specification?
1.1 This standard (Part 1) covers the requirements for welded and seamless plain end or screwed and socketed steel tubes intended for use for water, non-hazardous gas, air and steam. This standard is applicable to tubes of size 6 mm nominal bore to 150 mm nominal bore.
Is code for steel plate?
IS 2062 is a product standard of BIS or Bureau of Indian standards. This grade is primarily specifying the standards for the high tensile structural steel for the hot rolled. This type of standard steel is used majorly for structural purposes.
Is code for weight of steel?
Standard Unit Weight of Steel Bars Bar DIA Unit Weight (kg/m) 10 MM 0.617 KG 12 MM 0.888 KG 16 MM 1.580 KG 20 MM 2.469 KG.
Is code steel a section?
Basic Details IS Number : IS 808 : 2021 Technical Department : Civil Engineering Department Technical Committee : CED 7 ( Structural Engineering And Structural Sections ) Language : English ICS Code : 77.140.01.
