Table of Contents
How do you measure a window for blinds?
To measure for blind length, take the same approach using the metal tape measure from the top of the recess to the windowsill at 3 points and note the narrowest point. For vertical blinds, we recommend you reduce the length by 1cm to prevent the fabric from catching on the sill.
How do you measure a window inside?
Measure the height from the head of the window (top fixed-frame piece) to the windowsill (bottom fixed-frame piece) As with the width, take three measurements: down the left side, right side and the middle. Record the shortest measurement — this ensures that the new window will fit.
What size blinds do I need for a 35 inch window?
The actual width of the 35″ blinds are 34.5″ (half inch narrower) to comfortably fit inside a 35″ opening. So if your frame is exactly 34.5 inches, I would go with the 35″ blinds.
How much space is needed for inside mount blinds?
3⁄4″ is the minimum depth required for inside mount blinds.
How much smaller should blinds be than the window for inside mount?
Inside-Mounted Vertical Blinds Window should have a minimum recessed space of 2 3/8″ for inside mount. Measure the width of the window from the top of the opening to the sill in 3 places. Use the smallest dimension for the blind width. The factory will automatically deduct up to 1/4″ – 1/2″.
What is the standard size for window blinds?
If you’ve ever wondered what the standard size of window blinds is, the standard window length ranges from 36 to 72 inches, and the standard width ranges from 24 to 60 inches.
How do you measure for top down blinds?
Measure the exact height from the top inside edge down to the window sill/window bottom in THREE places: left, middle, right. Take the largest/longest of the three measurements (rounded up to the nearest 1/8th inch). This is the height you will order. Important: Do not take any deductions from your measurements.
Do you measure a window from inside or outside?
Measure the window width from the inside jamb on the left and right sides of the window in three places – the bottom, middle and top. Do not include any trim in this measurement.
How are old blinds measured?
How Do You Measure your Blinds? Measure your window opening width at the top, middle, and bottom. Also measure the height at the left, right, and center. Write the narrowest width and tallest height down, rounded to the nearest 1/8 inch. Write down your measurements as width X height.
How much should I subtract for window blinds?
Record the height of the window accurately, including any brackets or moldings you may have. Add three inches to the measurement to ensure sufficient mounting space. Deduct half an inch from the blind’s height when it extends beyond the frame.
Should blinds be flush with window?
1. Measuring window frame for accurate blinds fitting. 1) Mounting flush with the wall gives a cleaner look, as it hides the depth of the window sill itself and gives a smooth surface against your wall. We recommend this in most cases if you are mostly concerned with aesthetics.
Does Home Depot cut blinds length?
Once you have properly measured, bring your measurements in to the store. Our associates can cut your in-store bought blinds to the exact size needed, for free.
How much shorter should blinds be than opening?
To minimize light leakage the blind should overlap the window opening by at least 1 1/2″ on each side for a total of 3″ on entire width. 2) Measure distance from where the top of the blind will be located to the window sill. The blind should overlap the window opening on the top by at least 1-1/2″.
Does length matter for blinds?
In most cases, it is OK to have your blind longer than your window, even for inside mount. If you order the shade too long, it may not align properly when lowered to the sill of your window. Measuring a Window for Inside Mount. An inside mount blind should fit the window measurements perfectly.
How do you measure a window for a room?
1) A given room must have a window or glass door that is sized to equal at least ten percent of the floor area of the room. So, if a room is 10 feet wide x 12 feet long, then the room area would be 120 square feet and the minimum size of the window in that room would have to be12 square feet.
What is the standard rough opening for a window?
Recommended rough opening is between 3/4″ (19mm) – 1″ (25mm) larger than the window width and height. Ensure that the rough opening is plumb, level and square, and the walls in the opening are not twisted. a) 1 1/2″ (38 mm) solid blocking is required at the sill and sides of the opening.
What is the difference between rough opening and window size?
A rough opening is the opening that is left in a frame wall where the window frame will sit. The measurements of the rough opening will be important for you to choose the right window frame size. The actual window size will be lesser as the frame will have a header, sill, and vertical trimmers that will have to fit in.
How do you know what size blind slats to buy?
Measure your window’s height and width, as well as depth, and pair it with proportionate blinds. Easily enough, small slats are ideal for narrow window frames or tiny windows, while bigger spaces generally beg for larger slats.
How do you measure for replacement vertical blinds?
If you have an existing slat that you are looking to replace, then you can measure this. Remove the bottom weight and measure the total hem to hem drop of the fabric slat from the very top to the very bottom, ensure the fabric is flat with no folds or creases. This measurement is the drop size you will order.
