Table of Contents
We always test which way to lay our film down by licking our thumb and fore finger and pinching the film. The side that sticks to the moisture on your finger or thumb is the side which is water soluble and this is the side which faces down in the water.
How do you activate hydro dip film?
Spray the activator from side to side holding the gun approximately 12-18” from the surface in an overlapping pattern as typically done when laying down a consistent path of activator with other films. The speed this is done will determine the amount of activator being deposited.
What are the steps to Hydro dipping?
Below is a step-by-step guide on how you can apply your own hydrographic film. STEP ONE: GATHER YOUR MATERIALS + PREP. THINGS YOU NEED (included in our dip kit): STEP TWO: PAINT. STEP THREE: SET UP. STEP FOUR: ACTIVATE. STEP FIVE: DIP. STEP SIX: CLEAR COAT.
How do you not get bubbles when Hydro dipping?
3. Not Lowering On an Angle. When hydro dipping air bubbles are your enemy and if they get between your product and the paint you’ll be left with a blotchy paint job. Putting your item flat into the paint allows air bubbles to form.
What is the activator for hydro dipping?
INK DRINK FILM ACTIVATOR. INK DRINK Hydrographic Film Activator is an easy to use film activator, compatible with most films on the market. Ink Drink maintains the richness and color vibrancy of your film and activates most films with a single pass (one coat).
Do you need a base coat for hydro dipping?
Choosing the right base coat color is very important in hydro dipping. So if you are wanting the design to look as intended and usually shown on the product page of where you are purchasing the film, then using a white base coat is usually the best choice unless it is specified that another color was used in the photo.
Do you need activator to Hydro dip?
Under and over activating are two of the leading causes in problems with hydro dipping. You are not applying a layer of paint, you just need enough activator (with a fine mist, fan pattern spray) to cover the film lightly.
How long after hydro dipping can I clear coat?
The clear coat should be allowed to dry for at least 8-24 hours. Your item will be ready to use when the clear coat is no longer tacky to the touch and has sufficient time to fully cure out.
What kind of paint do you use to hydro dip film?
Acrylic spray paint is one of the most preferred types of paint used by painters for all their hydro-dipping tasks. But why? It is engineered to float as a thin film and sticks easily onto the submerged objects. If you want this kind of paint to spread on object surfaces evenly, consider using a spray can.
Do you hydro dip with hot or cold water?
The ideal water temperature range for hydrographic dipping is 80 to 90 degrees Fahrenheit.
What spray paint do you need for hydro dipping?
You can hydro dip any item with a nonporous surface — all you need are a few simple supplies! Step 1 – Using your 2x Rust-Oleum Spray Paint prime the item that you are going to Hydro Dip. Allow that to dry.
Do you have to prime before hydro dipping?
Dupli-Color Primer The first necessary ingredient to hydro dipping is the primer. It promotes adhesion of the transfer film to the object. After applying the primer, allow for it to dry, before transfering a film onto your part. This can take up to two hours.
Can you use satin spray paint for hydro dipping?
A gloss paint is ideal for hydro dipping. Rust-Oleum offers a wide selection of colors under high gloss, gloss, and semi-gloss finishes. If you are still looking for matte or satin finish, you can achieve that with your clear coat at the end.
Can u hydro dip glass?
These hydro dip glass bottles are colorful and unique and the paint technique is easy. You will never get the same paint finish twice with hydro dipping. I have photos, a tutorial, and a video showing the process. Definitely watch the video because the technique is so much easier to follow.
Does Hydro dip wear off?
Hydro dipping, also known as Immersion Printing, is a process of transferring colors and patterns onto various materials. The resulting look is 360-degrees of awesome. But does hydro dipping wear off? As long as the base paint remains stable, the hydrographics will remain intact.
Who is activator?
1. a thing or person that activates. 2. Chemistry. a substance used to induce or accelerate a chemical reaction.
Can you Hydro dip one color?
Spray a generous amount of one colour directly onto the water, you can do one big spray in the middle of the container or a few smaller sprays around the surface. Different spray locations will produce different patterns. Don’t overthink it though, the pattern will change quite a bit with each successive spray.
How long does Hydro dip take to dry?
Step 2: Paint the Base Coat The lightest color (in our case the white) will be your base coat. Be sure to avoid any fingerprints for a smooth finish, and avoid spraying the concrete at school to keep everyone happy in the process. After a full base coat is applied, it will take about 24 hours for the paint to dry.
Can you use acrylic paint to Hydro dip tumblers?
Can You Hydro Dip with Acrylic Paint? Yes! Acrylic paint is usually heavier and needs to be thinned by mixing with water before adding it into your dipping water. Depending on the paint you’re using, you may need to add some cornstarch or borax to add density to your water.
How do you spray paint water dip?
Instructions for Hydro Dipping With Spray Paint Fill your bucket or tub full of water. Spray different colors of paint directly into the water. Use a stick to swirl the paint design just the way you want it before you dip your object. Dip your object into the paint design.
Is rustoleum 2X spray paint acrylic?
About Acrylic Enamel 2X Rust-Oleum® Acrylic Enamel 2X Sprays are designed to provide long lasting protection and durability. These sprays apply easily, provide excellent coverage and dry fast.
