Table of Contents
Sample Test Cases for Toaster Connect the power cable to the appliance and check if it turns on the toaster. Check if the power light is visible on the appliance. Check if the power light shows once the toast is prepared. Check if the power cuts itself off once the toast is ready.
How do you test a toaster?
I would imagine testing: Different sized bread (area) should be usable in the device. Different sized bread (thickness) should be usable in the device. Bagels should be toastable. Bread should not fall against heating elements. Ability to produce light, medium and dark toast.
How do you test a broken toaster interview question?
“If the toaster doesn’t toast the tester, it works; if it toasts the tester, it’s broken.” Plug the toaster into a PowerPoint. Turn the power point on. Place required number of slices of untoasted bread in the toaster – dependant on slots available.
How toaster is working?
The nichrome wire in your toaster conducts electricity to the metal heat elements and plates called mica sheets. As the electricity flows and electrons collide, the energy around the nichrome wires becomes heated, and the excess energy radiates away from the coils, heating your bread.
Can you fix a toaster?
To repair or replace many internal parts, including the heating elements, you will need to remove the chassis from the toaster shell. Disassemble the toaster by removing levers, knobs, and fasteners, then carefully lift the shell off the chassis.
What is test strategy?
A test strategy is a guideline to be followed to achieve the test objective and execution of test types mentioned in the testing plan. It deals with risk analysis, competency plans, and test objectives.
What is crud testing?
CRUD testing is a black box testing. CRUD is an acronym for Create, Read, Update, Delete. CRUD testing is another term for database testing. It depends on the needs and requirements of an organisation as to which kind of database has to be integrated with their application.
How do you test a pen interview question?
General Test Cases/Scenarios for all Types of Pen The grip of the pen: Verify if you are able to hold the pen comfortably. Writing: Verify if you are able to write smoothly. Verify that the pen is not making any sound while writing. Verify the ink flow. Verify the quality of the material used for the pen.
How would you move Mount Fuji answer?
So now for the big question: How would YOU move Mount Fuji? My answer: By doing nothing. As the earth revolves about its axis and follows its orbit, Mt. Fuji moves with the planet, progressing through days and seasons along with the rest of the planet.
How is a PAT test done?
A full PAT test includes a visual inspection of the appliance and an in-depth check using specialised PAT testing equipment. This test checks earth continuity, lead polarity, and insulation resistance of the appliance. Some appliances only require a reduced test, known as a PAT insulation test.
How do you test electrical appliances?
Set the multimeter to the “amps” range (A), not the “milliamps” range. Turn off the appliance, and connect the multimeter to the circuit to be tested. Turn the appliance back on, and get the multimeter reading. Consult your appliance manual to see if the amps detected match the operating load of your unit.
What type of tester is suitable for non electricians?
What type of PAT testing equipment is suitable for non electricians to use? A. A PASS/FAIL tester is suitable for use by someone with no or limited electrical skills. The microPAT tester falls into this category.
Do toasters use magnets?
A simple circuit made up of transistors, resistors and capacitors turns on and supplies power to the electromagnet. The electromagnet attracts the piece of metal on the handle, holding the bread in the toaster. The spring immediately pulls the two slices of bread up.
How does toaster know to pop?
If the bread is close to the heating element for the right amount of time, it turns a light brown color and turns into toast. If it is heated too long, the toast will turn black and begin to smoke. A pop up toaster causes the toast to “pop” up when it stops.
How do the parts of a toaster work together?
Once your bread slices are loaded, you start by pressing down a handle or button which lowers them inside the toaster. As this happens, a wedge inside the toaster pushes two contacts together, forming a connection or circuit between the power supply and the nichrome wires.
How do you fix a toaster that won’t heat?
Now follow these steps: Unplug the toaster. Remove the carriage lever and unscrew the front cover. When the cover is off, blow any crumbs from the latch assembly. Test the latch to make sure it moves up and down easily. Look at the heating coils too to see whether all the crumbs have been removed.
How long should a toaster last?
While toasters can range in price and features, most toasters have an average lifespan from six to eight years. You can extend the life of your appliance by cleaning it regularly to remove excess breadcrumbs and additional food particles.
Do toasters have fuses?
The fuse is used for safety to ensure your toaster does not over heat. If the fuse in your toaster cuts off power to the heating element and gets stuck, then there is a possibility it is broken or damaged. The fuse is used for safety to ensure your toaster does not over heat.
What are different types of testing?
What Are the Different Types of Testing? Accessibility testing. Acceptance testing. Black box testing. End to end testing. Functional testing. Interactive testing. Integration testing. Load testing.
How do you write a test approach?
Common Sections of Test Strategy Document Step #1: Scope And Overview. Step #2: Test Approach. Step #3: Test Environment. Step #4: Testing Tools. Step #5: Release Control. Step #6: Risk Analysis. Step #7: Review And Approvals.
What is a good test case?
The whole point of writing good test cases is providing test coverage as widely as possible. Each test case must aim to cover as many features, user scenarios and as much of the workflow as possible.
