Table of Contents
How Wide Should Curtains Be? To ensure that panels look ample and drapey when closed, they should have a combined width that is 2 to 2½ times the width of the window. Exceptions: If you’re hanging curtains just to frame a window and don’t intend to shut them, you can round down to 1½ times the width.
How wide should I make curtain panels?
How wide should curtains be? To ensure that curtain panels look ample when closed, they should have a combined width that is 2 to 2.5 times the width of the window/rod. That means if you are ordering Grommet style or Rod-pocket style, the total drapery width should be at least 2 times the window/rod widths.
How wide should curtains be for 60 inch window?
For example, for a 60-inch window with two curtain panels, add 24 inches to 60 inches (window width) and divide by 2 (number of panels) to get 42 inches. The two panels ordered each need to be at least 42 inches wide.
How wide should curtains be for 72 inch window?
Let’s say you want standard, thick curtains to cover your 72-inch window. You’ll want to look for curtains that measure between 144 and 180 inches wide. Bear in mind that this is the total width to aim for, not the width for each curtain if you intend to have two (one on either side).
How wide should stationary panels be?
Stationary drapery panels are available in standard or deluxe fullness. Standard fullness is one width of fabric pleated to a width of 17-23 inches. 5 pleats are standard.
How wide should curtains be for 120 inch window?
For a 120-inch window, how wide should curtains be? Depending on the weight of the fabric and how much you want the curtains to be. At least a width and a half is what I would recommend. 180 inches is the width of each curtain.
When buying curtains is the width per curtain?
The width measurement actually refers to the width of each curtain in the pair, as you need double the width of your track or pole in curtaining for the gathered effect.
How wide should curtains be compared to window width?
A common rule for displaying curtains properly says the curtains finished width should be at least 2 times the width of your window (if not more – sheers can be 3 times the window width) to achieve a look of proper fullness.
Do eyelet curtains need to be double width?
Buying the Correct Size Measuring for ready made eyelet curtains is very simple. Double the width to determine the total curtain width you need for your window. If you are using just one curtain and pulling it to one side, then the total width of this one curtain should be close to the number you just calculated.
How far should curtain rod extend past window?
As a general rule, drapes will be open during the day, so make sure the curtain rod extends at least four inches on each side of the window’s inside frame. To create the illusion of a wider window, extend the rod up to 10 inches beyond the window’s frame.
How do I measure curtain width?
For the width, take your steel tape measure and take the full length measurement of your pole or track. For pencil pleats on a track, measure the drop by starting from the top of the track, and for pencil pleats on a curtain pole, measure from the eye of the curtain rings (where you’ll be hooking your curtains into).
Do curtains have to touch the floor?
Yes, curtains should be long enough to touch the floor. With a few exceptions, the longer the curtains are the more stylish and elegant it will look. This is why most standard ready-made curtains are lengthy. But the reality is that various decorating styles use different curtain lengths.
How long should curtains hang below window sill?
Just over sill length Take the hem of the curtain to just above the radiator, or up to about a maximum of 4 inches (10cms) below the sill.
How do you measure for stationary curtains?
Here’s how to measure: Measure the width of the window opening from outside edge to outside edge of the window casing. Add 6″ to each side (12″ total). Take the total number (your measured width plus what you added to each side), and divide it by the number of panels you want to order.
How long should stationary curtain rods be?
Stationary rod lengths, whether standard or decorative, should equal one-third of the window glass width. Install them anywhere from two inches above the top of the window frame to two inches below the bottom of the ceiling molding. Hanging them at the higher end of the range makes the ceiling appear higher.
How wide should curtains be for 100 inch window?
For example, if the window is 100 inches wide, the curtains should be made to 125 inches wide in order for them to hang off the window when in the open position. For an inside-mount curtain, measure from one edge inside the frame to the inside edge on the opposite side.
How wide should blackout curtains be?
In order to have enough material for the curtains to fold over themselves several times, they should be at least 2.5 times as wide as your frame. For instance, if your frame is 3 ft (0.91 m) wide, you will want curtains that are 7.5 ft (2.3 m) wide.
When buying curtains do they come in pairs?
While it may seem logical that curtains should come in sets of two, curtains do not always come in pairs. They most often come in panels. Panels are a single piece of fabric or one curtain. If you want a typical curtain pair, you will need to buy two panels.
How do you calculate curtains?
There’s a simple calculation to work out how much curtain fabric you need. First, multiply the track/pole width by your chosen fullness (eg. Pole width 150cm x 2.5 = 375). Next, divide that figure by the fabric width, which is typically 137cm (375 divided by 137 = 2.73).
How much fullness do you need for eyelet curtains?
– An eyelet curtain will usually have 2 x fullness = 100% of the track width. – A pinch pleat curtain requires more fabric to sew in the pleats as it gathers up tighter. As such you will require 2.5x the track width or 150% fullness.
What is curtain fullness?
Fullness is the extra fabric used across the width or sometimes height of the drape. Fullness provides a drape with a richer look. Using one and a half as many widths of the fabric used in a flat curtain yields a curtain with 50% fullness. Using 1.75 times more fabric yields 75% fullness.
How do you measure curtain width for eyelet curtains?
Simply measure between the finials (the decorative ends) to obtain the width. Drop: The inner edge of the eyelet is set down 3cm from the top of the curtain so you need to allow for this when measuring or your curtains will be 3 cm too short!.
