Table of Contents
Trex Select is a wood-plastic composite capped with a proprietary layer of material with a wood-grain finish. It’s available in four colors: redwood, grey, light brown, and deep brown. Decking is 51/2 inches wide and comes in 12-foot, 16-foot, and 20-foot lengths.
What are the dimensions of Trex?
2 x 6 boards available in 12′, 16′, and 20′ lengths.
What is the width of composite decking?
How wide are composite deck boards? Deck boards from popular composite decking brands such as Trex, DuraLife, and Deckorators usually measure in at 5-1/2 inches wide.
What is the spacing between Trex deck boards?
Important points about gapping All deck boards must always be installed with a 6mm side-to-side gap. The Trex Hideaway Hidden Fasteners automatically measure the 6mm gap between grooved edge boards but you must still ensure the 6mm gap with the square edge boards.
Does Trex decking need to be spaced?
You must gap Trex® decking, both end-to-end and width-to-width. Gapping is necessary for drainage and the slight thermal expansion and contraction of Trex decking boards. Gapping also allows for the shrinkage of the wood joist system.
How wide is Trex decking with hidden fasteners?
A: The Trex Hideaway hidden fastener will automatically create a 1/4” space between each decking board. Q: What size gap between the boards? A: The Trex Hideaway hidden fastener will automatically create a 1/4” space between each decking board.
What widths do decking boards come in?
Common deck board widths are 4”, 6” and 8”. The widths are readily available in most lumber or building supply stores, and the number of pieces easily calculated into deck dimensions. Other widths may be used for aesthetics and effect. What is this?.
How wide are TimberTech deck boards?
The TimberTech AZEK Vintage Collection features innovative Multi-Width Decking, which offers boards in narrow (3.5”), standard (5.5”), and wide (7.25”) widths. Choosing your deck board width is mostly an aesthetic choice.
How wide is TimberTech?
Featuring a distinct, wirebrushed, low-gloss texture, and six dynamic colors, TimberTech AZEK’s Vintage Collection now comes in three widths: narrow (3 1⁄2”), standard (5 1⁄2”) and wide (7 1⁄4”).
Can Trex be installed on 16 inch centers?
Most composite and PVC decking brands, like Trex and Azek, recommend a maximum joist spacing of 16 inches OC. Some brands, like WearDeck, let you get away with more – reinforced with a layer of fiberglass on both the top and bottom, WearDeck boards easily allow for spans of 24 inches OC.
How many Trex boards do I need for a 12×12 deck?
(Choose from 8, 12, 16, or 20 ft board lengths. Choose which board best fits the dimensions of the deck.Decking Materials. Board length Boards required 8 FT 206 12 FT 137 16 FT 103 20 FT 83.
How much overhang should a Trex deck have?
Trex is a popular composite material with a maximum overhang of 102mm or around 4 inches. Between one and two inches of deck board overhang is ideal when you attach an outer fascia board, or at least 1 ¾” to 2 ¾” of overhang before installing the fascia.
How do you stagger Trex decking?
“Stagger your boards so their ends are in different spots.” Slide the next board in so it’s parallel to the first. The sliding motion is important, as you want the spacer to fit in the groove of this board, too. Basically, you’ll have two boards with the spacer between them.
Are Trex hidden fasteners worth it?
Hidden deck fasteners are a nice way to keep the surface of your deck looking clear and unencumbered. But they are not the right fastener for all decks. In fact, using hidden deck fasteners inappropriately is a formula for failure. Some deck projects require the stronger fastening power of face screws.
Do you leave a gap between composite deck boards?
As temperatures fluctuate, composite deck boards will naturally experience thermal expansion and contraction. That’s why the board ends should never be installed tight against one another. There should always be a slight gap.
How many deck boards do I need for a 12×12 deck?
For example, a 12-foot x 12-foot deck of 5/4 x 6 pressure treated wood decking on 16 inches on center spacing of joists will require: A 12-foot long deck with joists 16 inches on center will require 10 joists. 20 fasteners x 26 (number of rows of decking) = 520 fasteners. Add 10 percent to be safe.
How much wood is needed for a 12×12 deck?
A 12 -by-12-foot deck will need 144 lineal feet of decking. The amount of individual boards will depend upon the size and type of decking your choose and the amount of space you plan to leave between decking boards.
How much does it cost to build a 20×20 deck?
The average homeowner spends $2,200 to build a 10×10 foot deck, $6,160 to build a 14×20 deck, and $8,800 to build a 20×20 deck. The cost to build a deck with pressure-treated wood, hardwood, or composite is about $25 per square foot, for both materials and installation.
What is the actual width of a 5 4 deck board?
5/4 Decking Actual Dimensions 1″ x 5.5.” If you use 5/4 decking, you are getting two-thirds of the board of a 2×6.
How wide is a 6 inch deck board?
Lumber sizes are usually given in “nominal” measurements. The nominal measurements are a board’s size before it has been planed smooth (surfaced) on all 4 sides.Dimensional Lumber. Nominal Size Actual Size 6×6 5-1/2″ × 5-1/2″.
Are wider deck boards better?
Narrower boards work best. 4” nominal (3-1/2” actual) wide deck boards perform better than wider (6” nominal) deck boards. Because there are more gaps between the deck boards, 4” nominal deck boards provide about 44% more top of deck ventilation than 6” nominal decking.
What decking boards are widest?
Wider than other composite decking boards Our new EvoDek+ Grey boards have a width of 158mm, making them noticeably wider than most other composite decking products.
What is the widest composite decking?
Do Decking Differently Standard-width decking is not the standard anymore. You can now choose wide (7.25″) or narrow (3.5″) widths, in addition to standard (5.5″)-width boards, to add a touch of the unexpected – and an element of style.
