Table of Contents
Consideration #1: The scale of your house–The most typical dimensions of quarter round are ¾” x ¾” while the most common size of shoe molding is ½” x ¾”.
What size gap does quarter round cover?
Quarter Round: A quarter round molding is one of the most common types of molding you’ll come across. It’s typically ¾” inches by ¾” inches and is used to cover the expansion gap between the floor and a wall, baseboard, or toe kick.
How wide is 1/4 round?
The standard width and height of quarter-round pieces is ¾ inch. They are in long strips, up to 7 feet and more, which are cut to measure for installation.
Are there different sizes of quarter round?
The quarter round comes in a variety of sizes, which makes it versatile enough for a wide range of applications, as well as an ideal solution for eliminating the gap between trim and moldings and to fill corners.
How wide is shoe molding?
Shoe molding is available in wood, MDF, and polystyrene to match your baseboards. Standard shoe molding, available at home improvement centers and lumberyards, comes in widths of 7/16-inch to ½-inch and ranges from ¾-inch to 1-inch in height.
What is the difference between shoe molding and quarter round?
Shoe molding is much the same as quarter round, having the same 90° angle on the backside but instead of being a perfect quarter radius, its profile is a bit more squat. Using shoe molding gives the floor installer more latitude in their end cuts and also allows the trim carpenter to hide un-level floors.
What happens if your expansion gap is too big?
In addition to detracting from the aesthetics of your surroundings, buckling can also damage the interlocking mechanism of your laminate planks, resulting in extra expenditure to have them replaced. The minimum recommended size for an expansion gap is a quarter( ¼ ) of an inch.
How wide is half round?
Half Round Moulding System (3.5″ wide).
What nails do you use for quarter round?
Attaching Quarter Round Because it’s finish trim, install quarter round with finish nails, which have smaller heads than standard nails. A finish nail gun, fitted with 1.5- or 2-inch finish nails, works well. You can also drive finish nails the old-fashioned way — with a hammer.
What is quarter round molding?
Quarter round is another moulding style typically paired with baseboards to cover up gaps and imperfections between the base and the floor. However, this style of moulding is always shaped like a quarter of a circle, hence the name. It has a perfectly curved edge and comes in a variety of sizes.
Should you paint or stain quarter round?
If you are laying quarter round or shoe molding on hardwood floors, you should lay a quarter round or shoe molding that matches the floor wood grain & stain. If you are laying quarter round on a ceramic, vinyl, or stone tile floor, you should paint the quarter round to match the baseboard molding.
Can I glue quarter round?
A: Quarter-round should be nailed to the base boards only. It is intended to hide gaps between the base and floor. It should also permit a little movement in the flooring. Plus, it absorbs the impact of feet and furniture legs, so you may want to replace it sometime—thus, don’t glue it.
Should baseboards touch the floor?
Baseboards should only touch the floor if you have no plans to carpet your floors and if you’ve already finished installing your other flooring. If you have yet to install the rest of your floor, carpet or otherwise, you’ll need to take into account the height of the installed flooring.
Is quarter round dated?
Quarter round molding is often the default standard molding among contractors, but it looks cheap and dated. Be sure to specify an alternative, such as a flat molding. Most contractors will be more than happy to accommodate. Quarter round molding is, literally, a quarter of a dowel.
Should I caulk quarter round?
To Install Quarter Round Use Nails Not Caulk Installing quarter round on baseboards with caulk is not a good idea because it can be difficult to remove should you need to repair the floor in the future.
Do I have to use quarter round when installing laminate flooring?
No you never need to use quarterround. I try to do all installs without using it. 2 best options: Slice out the bottom .
What type of baseboards are in style?
Solid wood finger jointed wood, and MDF (medium-density fiberboard) baseboards are among the most popular material choices. Choosing the material often comes down to budget or color preference, so it’s easier to determine which material is right for your house.
Can you lay laminate from both sides?
Taper Both Sides of the Room You may find yourself installing laminate in a room that is 6-in. Unless one side of the room will be forever covered with furniture, you’re better off splitting the difference and tapering both the first and the last rows so neither side will be so noticeable.
Do vinyl planks really expand?
Expansion and contraction is a fact of life vinyl! Vinyl is susceptible to temperature changes in its ambient environment which will cause the vinyl flooring to expand and contract with normal hot and cold fluctuations.
Does laminate warp in heat?
Laminate flooring is susceptible to the effects of changing temperature, humidity, and moisture in the air. A simple explanation for this is that when temperature increases, laminate flooring tends to expand. A decrease in temperature, on the other hand, leads to contraction.
HOW MUCH DOES quarter round cost?
Quarter-round molding costs start at about $0.50 per foot, with eight feet being the most common length. It’s so-named because it’s shaped like one-fourth of a circle.
