Table of Contents
Standard tubs usually have external measurements around 60 inches long, 30 inches wide and 14 to 16 inches high.
How wide is a bathtub inside?
The interior measurements of a regular bathtub are 45 inches long by 22 inches wide and up to 18 1/2 inches deep. If the tub is filled to the brim, it can hold up to 24 gallons of water, but most individuals only use 10 to 16 gallons of water for bathing.
How wide is a 60 inch tub?
60 inches long (5ft), 30 inches wide (2.5ft) with a water depth of around 30 inches (2.5ft). Smaller sizes typically run 48 inches long (4ft), 28 inches wide (2.3ft)with a water depth of around 30 inches (2.5ft)Nov 22, 2017.
How wide is a tub shower combo?
Most bathtub and shower combos come standard and are 60 inches by 30 inches by 72 inches or 60 inches by 36 inches by 72 inches. This includes a 60-inch basin length, 30 or 36-inch basin width, and 60-inch wall width.
What size is a 2 person tub?
A medium sized two person bathtub starts at around 66.9 inches long with a width of 33.5 inches and a height of 22 inches. The largest of the medium sized bathtubs comes in at 70 inches with a width of 35.4 inches and a height of 22.5 inches.
How much space is needed for a bathtub?
While there are no code requirements for tub size, minimum clear floor space alongside a bathtub should be at least 60 inches long (the length of a standard tub) and 30 inches wide. Always allow clear space for access to plumbing and/or whirlpool motors.
Are there bathtubs shorter than 60?
A small bathtub typically measures less than 60 inches, but can still deliver plenty of room for sudsy fun or soothing soak sessions. Lightweight and easy to clean, this 54 inch model is an affordable tub when you have tight budget and space requirements.
How is a bathtub measured?
Make sure your measuring tape reaches the outer edges of your tub and not just the inner curve of the tub. Next comes the width, which is measured from the back edge, or the wall, to the front edge. Afterward comes the height, which is measured from the floor to the highest edge of your bathtub.
What is a standard size bathroom?
The average size of a full bathroom in the US is five by eight feet, or 40 square feet. The average size of a primary bathroom in the US is 115 to 210 square feet, with an average of 160 square feet.
What is the standard width of a shower?
The smallest size is typically 32 inches wide x 32 inches deep (although the International Residential Code allows for showers as small as 30 inches x 30 inches), and they go up incrementally from there, usually to about 36 inches x 60 inches.
How small can a tub be?
The shortest freestanding tub is a mere 48 inches, or four feet long, and can work well for children’s bathrooms or even for adults of average height.
What is the average width of a shower?
The most common sizes are 32 x 32 inches and 36 x 36 inches, while the smallest standard shower pan size is 30 x 30 inches.
Is a 72 inch tub big?
As a general rule, extra-large alcove tubs are around 72 inches long, 36 inches wide, and 20 inches tall at the outside measurements, providing plenty of room for just about anyone who really enjoys relaxing in the tub. Remodeling your bathroom?Jan 12, 2022.
Can two adults fit in a bathtub?
First, there are two ways to achieve the two person tub, side by side is one way, but the most popular would be to have a tub where the couple face one another. That means the drain really needs to be in the middle and not on one end or the other.
What is the difference between a soaking tub and regular tub?
Deeper than the average bathtub, soaking tubs are designed to offer the ultimate in relaxation by allowing you to fully submerge. Soaking tubs average 23 inches in height, while a standard tub typically comes in at under 19 inches. Sep 19, 2018.
How wide is a walk in tub?
Walk-in tubs come in many shapes and sizes, but the most common models are designed to fit in place of a regular home bathtub, which is a footprint of 30 inches wide and 60 inches long. The height of walk-in tubs is usually between 20 and 45 inches, with the longer models generally requiring less height.
How much space is needed for a bathtub and shower?
In general, the smallest size is 15 square feet, which can fit a sink and a toilet. For a shower, to be installed, at least 30-36 square feet is required. For a full bath consisting of both a shower and a bathtub, you will need at least 40 square feet.
How close can toilet be to bathtub?
It is recommended that the distance from the centerline of a toilet and/or bidet to any bath fixture, wall, or other obstacle should be at least 18 inches. The minimum distance from the centerline of a toilet and/or bidet to any bath fixture, wall, or other obstacle is 15 inches.
