Table of Contents
A “standard” pedestal sink measures roughly 22 to 24 inches wide and 29 to 34 inches tall.
How wide is a standard pedestal sink?
The dimensions of your pedestal sink will depend on the design and your requirements. Typically, they are 19 to 24 inches in width and 22 to 24 inches in length. Since a pedestal sink is a standalone sink, it works very well for a bathroom with limited space, but it does not include a counter or other storage areas.
How much space is needed for a pedestal sink?
Expect that the depth to the wall of pedestal sinks, of any type, will be at least 16 in. (41 cm), with more common depths being about 20 to 22 in. (51 to 56 cm). Those built into a vanity or cabinet could be 21 to 24 in.
Are pedestal sinks outdated?
But while pedestal sinks are a brilliant solution for a small space, their classic design can feel a little outdated in a more contemporary bathroom. To get the best of both worlds, you need to look for a pedestal sink that breaks the mold.
What is standard bathroom sink size?
Sink Size and Shape Most round bathroom sink bowls are 16 to 20 inches in diameter, while most rectangular sinks are 19 to 24 inches wide and 16 to 23 inches front to back. The typical basin depth is 5 to 8 inches.
How do I choose an undermount sink size?
To determine the maximum sink size for your base cabinet, measure the interior of your cabinet and subtract two to three inches from each dimension. A 36″ base cabinet can handle a 33″ sink at most; a 30″ cabinet should be fitted with a sink no larger than 27″ wide.
What is the smallest kitchen sink size?
The sink sizes range from 24 to 33 inches. The 24 inch size is small enough to wash pots and pans in smaller homes.
Does a pedestal sink need a trap?
When the sink is clogged you don’t need to remove the sink from the wall to unclog the line, you only have to disconnect the Flex P-trap from the wall. If the drain is in the floor (Fig. 35A), ideally the Pedestal Sink will have the S-trap extension tube with the length L=JK (or you can cut it to the length you need).
What is the smallest space for a powder room?
You’ll need to find a space that is about 3 to 4 feet wide and 6 to 8 feet long. Anything smaller will be uncomfortable for your guests. Anything more substantial is not necessary, and it’s unlikely you’ll have that much “extra” space in your house.
Does a pedestal sink have ap trap?
Pedestal sinks provide a simple yet classic and space-saving look to a bathroom. If you need to open the P-trap to clean it or replace it, you can gain access and then open the trap as you would under a regular sink.
How do you hide plumbing behind a pedestal sink?
Here are a few methods to hide the exposed plumbing in your bathroom: Install a cabinet. Hide pipes with a storage bin. Construct a small shelf. Add a few potted plants to the decor. Build a mini wall-cover. Install a sink skirt. Install pipe coverings.
Do pedestal sinks need a backsplash?
A pedestal sink that rests against the bathroom wall requires a backsplash. However, if you have a small pedestal sink with a shallow basin, you will need a backsplash regardless of whether it’s positioned against the wall. This is because it is easier to splash when you have a small sink.
How can I make a pedestal sink look better?
10 Tips for Decorating Around a Pedestal Sink Master the Mirror. An interesting mirror doubles as a focal point and a useful spot to check your hair or makeup. Add Floating Shelves. Use Beautiful Accessories. Invest in a Stylish Faucet. Take the Floor. Utilize Other Flat Surfaces. Go Custom. Light it Up.
What is the average size of an undermount bathroom sink?
Undermount bathroom sinks are common types of bathroom sinks. These bathroom sinks are typically under 20” in order to give you enough space to do a number of tasks while not being overly large.
What is a standard size undermount sink?
The most common sizes for a kitchen sink are 30″ or 33″, however a standard size could measure anywhere between 24″ and 36″ in length. The bulk of what you find while shopping will fall within this size range. Generally, sinks up to 30″ will contain one large single bowl.
How do you measure for undermount bathroom sink?
HOW TO MEASURE If this is a simple replacement, measure the length, width and height of your current sink and choose one with the same measurements. Measure width from side to side and length from front to back–where you measure will depend on the installation type. Height and depth are two separate measurements.
