Table of Contents
In the US, CMU blocks are nominally 16 in (410 mm) long and 8 in (200 mm) wide. Their actual dimensions are 3⁄8 inch (9.5 mm) less than the nominal dimensions (to allow for 3⁄8-inch mortar joints between blocks in any orientation).
What is the difference between a cinder block and concrete block?
Cinder blocks are hollow rectangle-shaped structures usually made of concrete and coal cinders which find use in construction sites. Concrete blocks often, on the other hand, are flattened constructs made of steel, wood or cement.
What is the size of a concrete cinder block?
8-in x 8-in x 16-in Standard Cored Concrete Block.
Is cinder block cheaper than concrete?
Is a poured concrete foundation cheaper than a block wall foundation? Usually, the cost of construction varies from place to place. But as a matter of fact, poured walls cost about 20% less than the block foundation walls.
When did they stop using cinder blocks?
Cinder blocks had many uses in the construction industry until about 50 years ago when poured concrete wall construction became more common.
How much gap do you need between cinder blocks?
Lay out the block, making sure to leave a 3/8 inch gap between the blocks to allow for the vertical mortar joints (i.e., a typical 8x8x16 block is actually 15-5/8 inches long and 7-5/8 inches high to accommodate the mortar joint).
Can you build a retaining wall with cinder blocks?
You can build one in just six steps. Concrete blocks are ideal for building walls to hold back the soil after you dig into a slope for a pathway, patio, or another landscaping project. Retaining walls must be stronger than freestanding walls.
How tall is the average cinder block?
The most common actual size for a cinder block is 16 inches by eight inches by eight inches.
How much does a pallet of cinder block cost?
One pallet of cinder blocks costs $115 to $225 on average. A pallet of cinder blocks weighs 2,500 to 3,250 pounds. A standard pallet holds 70 to 90 cinder blocks.
Do you need rebar in a block wall?
Wall Size. A freestanding garden wall or block privacy fence will require less reinforcing than a basement or other load-bearing wall in a house or other building. An 8-foot-high wall will obviously require more rebar than a 4-foot wall. Very short walls, under 4 feet and laid with mortar, may not require any rebar.
Should you fill cinder blocks with concrete?
The reason filling is not recommended in most cases is that as the joining solution (mortar or concrete) you use to join cinder block solidifies, whatever you add within will diffuse the moisture inwards. Concrete, of course, will be wet. This moisture can take a year or two to dry out completely.
How much weight can a cinder block hold on its side?
Standards. As per standards published in 2003 by ASTM, an international building standards non-profit, all concrete blocks must support at least 1,700 pounds of weight per square inch (PSI).
How strong is cinder block?
The Masonry Advisory Council states that the minimum compressive strength for concrete blocks is 1900 pounds per square inch. Although, keep in mind, dense blocks are often stronger than this. The Mechanical Properties of Unreinforced Brick Masonry reports that the average concrete block can handle around 3500 psi.
Can a cinder block hold a car?
If you have to use concrete blocks to support the vehicle, place the blocks to support the automobile frame, not the wheels. Concrete block is not acceptable, because it’s far too frangible. There are really only three options: ramps, old-school jack stands and, of course, a hydraulic lift.
How many bags of concrete does it take to fill a cinder block?
Fill Volume for Various Block Wall Thicknesses Block Wall Thickness Blocks Filled per Cubic Yard Concrete/Grout per 100 Block 6″ 120 .83 yd 3 8″ 100 1.0 yd 3 10″ 80 1.23 yd 3 12″ 65 1.54 yd 3.
How tall can a cinder block retaining wall be?
Most retaining walls, whether load-bearing or not, average between 3 and 4 feet in height. As a general rule, you do not want to build any sort of structure over 4 feet in height without including some type of structural support within.
Can you build a cinder block wall without mortar?
QUIKWALL® Surface Bonding Cement (SBC) now makes most block construction possible without using mortar; it’s literally a “stack and stucco” project. A single coat on dry-stacked block gives a handsome stucco finish and provides greater flexural and impact strength than mortar with less expense.
Does a 2 foot retaining wall need drainage?
These walls need a drainage system regardless of the wall height. If there are poor draining soils such as clay behind the wall, there needs to be drainage incorporated the wall system. Clay when wet is very weak, so it is essential to provide a way for water to escape from behind the wall.
How many cinder blocks are in a pallet?
How much does a pallet of cinder blocks weigh? A typical 8 x 8 x 16-inch cinder block weighs at least 28 pounds, depending on the aggregate. A pallet holds 108 blocks, so a pallet of cinder blocks weighs over 28 x 108 = 3,000 pounds.
What size blocks for foundation?
Block foundations use cinder blocks (8 x 8 x 16 inches) that are stacked on each other and cemented in place with mortar. The process starts on the top of the footings with each row forming its own course. The blocks are then reinforced with rebar placed vertically in the holes or cells and filled with concrete.
