Table of Contents
Sink Size and Shape Most round bathroom sink bowls are 16 to 20 inches in diameter, while most rectangular sinks are 19 to 24 inches wide and 16 to 23 inches front to back. The typical basin depth is 5 to 8 inches.
How wide are vanity sinks?
Typical round vanity sinks are 16″ to 20″ in diameter (oval shapes may be wider). Basin depths are typically 5-8″. Round up to the nearest increment.
How much width do you need for a bathroom sink?
Bathroom Sink Distance From the Wall The bare minimum is 15 inches. This is measured from the sink’s center line to the wall.
What size sink fits in a 24 inch vanity?
If your vanity is 24-inches wide, look for a sink no more than 16-inches long to get at least four inches of counter space per side. The maximum sink length (or diameter) you can get is 22 inches, but this will leave no usable counter space.
What are standard bathroom vanity sizes?
Standard widths for vanity cabinets are 24, 30, 36, 48, 60 and 72 inches, however, you may find some in-between sizes out there. The standard depth of a vanity, from front to back, is typically between 20 to 21 inches. However, there are narrow depth options available which are usually 18 inches.
How big is a small bathroom sink?
Small bathroom sinks or washbasins are any sinks measuring between 15 inches to 20 inches. But there are also petite sinks that are under 15 inches long.
Are sinks a standard size?
The most common sizes for a kitchen sink are 30″ or 33″, however a standard size could measure anywhere between 24″ and 36″ in length. Sinks that measure more than 30″ in length will usually contain two or more bowls, however, you may still find some single-bowl sinks in these larger sizes.
What size sink goes in a 36 inch cabinet?
A typical 33-by-22-inch sink will fill a 36-inch base cabinet. If you’re replacing a sink, make sure it fits the existing cutout. If the cabinet allows, you may be able to install a larger sink by expanding the cutout.
How much space do you need behind a sink?
Kitchen Space Distance Recommendations Space Distance (Inches) Distance between island and counter Minimum 42 inches usually or 48 inches for kitchens with +1 cooks Walkway space Minimum 42 inches near a work area or 36 inches elsewhere Dishwasher to sink 36 inches maximum.
How do you measure the depth of a sink?
Place your straightedge ruler or your level across the top of your sink. Use your tape measure to measure the deepest part of your sink basin to the bottom edge of the ruler. Write down the depth. If you have an undermount sink, be sure to measure the height from sink to countertop.
Is 24 inch sink too small?
Nearly every sink style works in small kitchens, as long as your sink is between 22 to 24 inches on average. Anything over 27 or 30 inches is too large for a small kitchen. You also need to conserve as much counter space as possible. Since you have less space, single-bowl sinks may work better in your kitchen.
Can you put a 30 inch sink in a 36 inch cabinet?
For example, a 36″ cabinet can accomodate a 30-32″ sink. Next, measure front to back to find cabinet depth (standard cabinets have a 24″ depth). If your countertop has a backsplash, subtract its thickness from this figure. In general, most cabinets can accommodate a sink that is 20 inches front to back.
What is the standard size of a bathroom sink cabinet?
The most common bathroom vanity widths are 24, 30, 36, 48, 60, and 72 inches. For single-sink cabinets, the average bathroom vanity width range is between 30 and 48 inches. For double vanities, a width range of 60 to 72 inches is standard.
What is the standard size of a single sink vanity?
The standard vanity size for single vanities is between 36 and 48 inches wide, making them a fantastic option for guest bathrooms and powder rooms. When you have an especially small bathroom design, there are even wall-mounted vanities designed to free up valuable floor space.
How wide should a vanity be for 2 sinks?
Typically, the best size for a double vanity is 72 inches wide. This is large enough to comfortably accommodate both sinks while still moderate enough to fit in most bathrooms. Additionally, 72-inch vanities usually provide adequate storage space.
How is vanity depth measured?
Take a measurement at the widest part of the variety in contact with the the floor, which is your base width. Then, measure across the countertop, which is your top width. Next, to get the depth dimensions of your vanity, take base and top measurements.
What is the smallest size bathroom vanity?
The Perfect Small Bathroom Vanity — 24 Inches & Under! There’s even at 18 incher below, if you have an incredible tight squeeze in your bathroom. Most every cabinet below comes in multiple paint colors/finishes and several come in multiple sizes, too.
What is the smallest vanity sink?
At 18″ wide by 10″ deep, this tiny wall-mount is one of the smallest sinks out there. Duravit Vero Wall-Mounted Handrinse Basin, $360.75 from eFaucets. This sink has an attractive, modern look, and the attached towel bar is a nice touch. Cento Ceramic Wall mount Bathroom Sink, $459.99 from Wayfair.
What size are bathroom sink drains?
While a bathroom sink’s design and overall size may vary from one model to the next, the drain holes are fairly standard, 1.25 inches being a general standard, with widths of 1.5 inches and 1.625 inches also common. The size of the hole helps determine which size drain is needed for that particular sink.
