Table of Contents
How to Install Closet Rod in Drywall Without Studs? Step 1: Measurement or Marking Close & Walls. Step 2: Start to Drill and Holes. Step 3: Re-Drill for Pilot Holes. Step 4: Position the Board. Step 5: Transverse Center of Each Board. Step 6: Measure the Distance Between the Screw and Finished the Process. Final Verdict.
Do closet rods need to be in studs?
Basic Installation It should be placed in front of a stud so you can screw into the stud to give it support. The typical height of a closet rod is from 60 to 80 inches, and both brackets should be at the same height, or the hooks you hang from the rod will slide to one end.
Can you hang a closet rod in drywall?
Can You Hang a Closet Rod in Drywall? You can hang a closet rod in the drywall in such a fashion that it holds your clothing without pulling out of the wall. In order to do so, it’s best to use shelf support style brackets. These brackets can be set at any point along the back wall of your closet.
How long can closet rods go without support?
You will need at least 1-foot, 9-inches (24-inches is standard) away from the back wall for hanging. When spanning an opening of more than 48-inches, consider adding a center support to the closet rod for added stability.
Why does my closet rod keep falling?
However, if you’ve overloaded your closet rod by squeezing too many clothes into too small a space, or if it’s simply too thin for the job, it could sag in the middle.
How much weight can a wooden closet rod hold?
Never put more than 25-pounds of clothing on one of these rods or it will fail. The motorized version works with a remote control and can hold up to 60-pounds of clothing per rod.
How do you hang a closet rod from the ceiling?
Draw a straight line on the ceiling at right angles to the joists using a yardstick or straightedge tool as your guide. Make the line the length of the closet rod you purchased for the project. Put the line at least 12 inches from the back wall of the closet to allow room to hang clothes hangers on the clothes rod.
Is a wood or metal closet rod better?
Wood rods use a shelf support and a hook for the rod. Metal rods are integral to the shelf and are supported with various wall anchors. When supporting these, you will get more support and stability when you install into the studs, regardless of whether the rod is made of wood or metal.
Can a closet be 20 inches deep?
When designing a closet, consider the specific efficiencies of each different storage element to better serve your closet needs. The comfortable recommended depth of a closet is 24” (61 cm), but closet depths as narrow as 20” (50.8 cm) can be used if desired.
How far should closet rod be from shelf?
Leave wiggle room between closet rods and shelves. If this is the case, mount the closet rod below the shelf, achieving a distance of at least two inches from the bottom of the shelf to the top of the rod. Without this clearance, the space between the shelf and rod will be too tight to maneuver hangers.
How do you attach wood to drywall without studs?
If you are securing wood to drywall where no studs are backing the wall, or you don’t want to mar the appearance of your wood with screws, use a high-strength construction adhesive. Construction adhesive will bond the wood permanently to the drywall.
What can I use if I don’t have a stud finder?
How to Find a Wall Stud Without a Stud Finder Shine a flashlight at a steep angle against the wall. Examine the baseboard for nails or outlets. Measure 16 inches from the first stud you find to approximate the location of the next one. Drive a small nail into the wall where you believe you have found a stud.
Do all closets have studs?
Closet shelves are usually anchored to the wall where the mounting screws can grab wall studs. If your walls are masonry, you likely don’t have studs at all. You’ll need the proper materials and methods to build a stud-free closet shelf.
How far apart are studs in closets?
Studs are usually placed either 16 or 24 inches apart. However, it’s always best to use a stud finder.
Do Closets need headers?
Closet Door Headers As you might have guessed, even a closet doorway needs a header. No matter how light the door, window, shutter — or even if an opening is empty — you must frame it with king studs, jack studs, cripples (one every 16 inches) and a header.
How much weight should a closet rod hold?
Aluminum Anodized Elite 1-5/16”: Up to 80 lbs. Stainless Steel 1-1/16”: Up to 95 lbs. Steel Polished Chrome Round 1-1/16”: Up to 110 lbs. Steel Polished Chrome Round 1-5/16”: Up to 170 lbs.
What is the sturdiest closet rod?
Closet rods made from steel are chrome plated. In addition to being the strongest, they are also very resilient. Even after being overloaded they are likely to spring back to their original shape due to the resilient quality of steel. Stainless Steel is the next strongest material.
How much weight can a wire closet shelf hold?
Typically, wire shelving maxes out at around 80 pounds. However, being made of steel, the tough, dependable EZ Shelf can hold up to 200 pounds (without securing to studs in 1/2” drywall) and the EZ Shelf heavy-duty garage shelving can handle even more—a whopping 250 pounds.
How much do clothes weigh in a closet?
Each box will hold about two feet of closet space. Tape the flaps securely with packing tape, and use tape to reinforce all the seams as well.19,665 Views. Items Weight (in pounds) Cubic feet Wardrobe (single) 175 25 Wardrobe (double) 315 45 Wardrobe (triple) 420 60 Armoire (small) 280 40.
Can I use a dowel for a closet rod?
A 1-inch dowel makes an ideal hanging rod. It is large enough to support the weight of shirts and pants, and small enough to be lighter in weight than the closet rod itself. This places less strain on the closet rod, which must support the weight of the dowel and the clothes on the dowel.
What is a valet rod for closets?
A closet valet rod is a small closet accessory intended to function as a temporary place to hang clothing. A step up from a hook, closet valet rods come in different sizes, but all can hold several hangers. They are not intended to replace a closet rod.
