Table of Contents
Use the up and down arrows to select heat, cool, heat and cool (auto), or off. The heat and cool (auto) setting will empower the thermostat to turn on the heat or the air conditioning as needed to keep the home at your selected temperature. Press the button on the right to make your selection.
How do I set the temperature on my vivint thermostat?
Learn how to adjust the temperature on a smart thermostat from the Vivint Smart Home app. Tap the Temperature icon from the bottom menu. Adjust the temperature by tapping the plus or minus icons or by sliding the heat or cool temperatures around the circle.
Can I use vivint thermostat without service?
Can I use Vivint without a subscription? You can use Vivint equipment without a subscription, but you wouldn’t have the benefit of professional monitoring, couldn’t access the mobile application, and won’t be able to use the 24/7 technical support service.
How do I change my vivint thermostat to Celsius?
Change temperature display unit to either Celsius or Fahrenheit from the Smart Hub: From the home screen of the Smart Hub, tap the Menu icon in the bottom right corner. Tap General and enter your 4-digit PIN. Scroll down and use the toggle to switch between F and C.
Where is the reset button on a thermostat?
How do I reset my thermostat? Take the front of the thermostat off the wall and look for a small white round reset button on the right side labeled “H.W. Reset”. Hold this button down for at least 5 seconds. The screen should fully populate temporarily.
Why is my thermostat not turning the heat on?
Wondering why your heat won’t turn on? Inspect Your Thermostat – First off, make sure your thermostat is set to the “Heat” or “Auto” setting. If that doesn’t start warm airflow, raise the temperature to the highest possible setting. Wait a few minutes to see if that sets the furnace in motion.
Why is my thermostat not calling for heat?
Loose connections, frayed wires, and aged wires all can cause your thermostat to eventually lose its connection to your A/C and heating system. Inspect your wiring thoroughly, making sure the connections are tight, and replace any wires as deemed necessary by you or an HVAC professional.
Why is my Vivint thermostat is not working?
If you think that your Vivint Smart Thermostat is not heating or cooling, you can run a test from the Vivint Smart Thermostat. If the test fails, there may be an issue with your HVAC system. You will need to contact your HVAC technician to diagnose the problem.
What happens if you stop paying Vivint?
Yes, Vivint will refund you on a prorated basis if you own a prepaid account after it deduces the charges and fees of the cancelation. Otherwise, you must pay the contract in full to cancel it.
What is the installer code for Vivint?
Enter the default installer PIN code (2203) 3. Select the device to control 4.
How do you turn the heat up on a Vivint thermostat?
Vivint Smart Thermostat – Adjust Mode Press the button on the right side of the thermostat once to bring up the mode options. Use the up and down arrows to select heat, cool, heat and cool (auto), or off.
What does AUX heat mean on Vivint thermostat?
Turning your thermostat to “heat” came with an unexpected “AUX” function appearing. What does it mean? The “AUX Heat” mode is usually an indicator that it’s freezing outside, and your is heat pump is using a secondary backup heat source – your auxiliary heat—to keep your home at your set temperature.
Where do thermostat wires go?
Thermostat Wiring Tips If your thermostat controls your heat, you will have a white wire. The Y wire is yellow and connects to your air conditioning compressor. The G wire is green and connects to the fan. Rc and Rh: The red wire(s) are the power source for your thermostat.
Why is my thermostat not working?
There simply may not be any power going to your thermostat. This could be caused by a poor connection, blown fuse, dead batteries, or a tripped circuit breaker. If all of these areas look good and your unit should be receiving power, the issue lies elsewhere.
How do you manually reset a thermostat?
Reset the Thermostat The method to reset your thermostat will vary depending on the model. Common methods for resetting a thermostat include installing the battery backward for five seconds, pushing a recessed reset button with a pin or paper clip, or shutting off the breaker to the thermostat for 30 seconds.
Do you turn the thermostat up or down for the heat to come on?
Generally speaking, your thermostat is a fairly simple device. This is particularly true if you are still using an older, manual thermostat with a dial and a slider. When you want more heat in the wintertime, you just turn up the thermostat and get the extra heat. You turn the thermostat back down.
How do I reset my Vivint thermostat?
Factory Reset Press DOWN to highlight Reset, then press the SIDE button. Press DOWN to highlight Reset, then press the SIDE button. To confirm that you want to reset the device to factory defaults, press DOWN to highlight Reset, then press the SIDE button. The device resets itself and reboots.
Why is my Vivint thermostat blinking red?
Fast Blinking Red: Network cable disconnected; check your device’s network cable. If it is connected, unplug the device for 30 seconds, plug it back in and wait for it to boot up. Unplug the device for 30 seconds, plug it back in and wait for it to boot up. Contact support if the problem persists.
Why is my Vivint panel offline?
Several issues can cause your panel to lose the connection to your home WiFi network. A passing storm may have knocked your power and network offline. An Internet outage in the area could have caused the WiFi to go out. Find out how to test your WiFi to determine if you should contact Vivint or your ISP.
