Table of Contents
What is L1 and L2 on a dimmer switch?
Dimmers look slightly different to standard switches being much more chunky. They usually come supplied with a common(C), Line out(L1) and Line out(L2) terminals similarly to a two way switch. Sometimes all three terminals are in a row.
What are the 3 wires on a dimmer switch?
Single pole switches will have 3 wires: a hot lead wire, a ground wire, and a traveler wire. Older homes may only have a hot lead and a ground wire. If you have less than three wires, stop and call an electrician.
Do LED dimmers need a neutral?
The prices of LED bulbs are dropping, making them the perfect choice to replace your energy-wasting incandescent bulbs. But if your current bulbs are on a dimmer, you may run into issues even if you install dimmable LED bulbs. If you don’t have a neutral wire, you’ll have to find a ‘no neutral required’ dimmer.
Does it matter which wire goes where on a dimmer switch?
1 Answer. Unless the new dimmer is specifically marked with LINE and LOAD or similar, it doesn’t matter which wire goes to which screw/pigtail in a simple two wire switch or dimmer. Since your new switch can be used as a three way, the instructions should say which screw should not be used.
What wires go to L1 L2?
The yellow wire goes into the common terminal, red goes into the L1 terminal and blue goes into the L2 terminal. The grey wire goes in the common terminal, the brown wire goes in the L1 terminal and the black wire goes in the L2 terminal.
Is L1 live or neutral?
The faceplate of a single, one-way switch has two terminals: “L1” is the terminal to which the neutral core wire is attached – the blue wire (traditionally black, before the change). “COM” or “Common” is the terminal to which the live core wire is attached – this is the brown wire (formerly red).
What does C mean on dimmer switch?
A one way light switch has two terminals which is a common marked as COM or C. The common is for the live wire that supplies the input voltage to the switch. The other terminal is marked as L1 and is the output to the light fixture.
How many wires do I need for a dimmer switch?
Attach the Dimmer Switch There will be three wires: one black, one white, and a separate ground wire that may be bare copper or is sometimes wrapped in green.
Do you need three wires for a dimmer switch?
When installing a Dimmer switch, all you’re really doing is controlling the amount of voltage flow to a light which makes it dim at a low setting to a fully bright light at maximum setting. Now a typical circuit will contain a 3-wire cable known as romex.
Do dimmers need red wire?
It depends on the dimmer switch. If it’s a single control dimmer then normally the white wire is your hot to the dimmer and the black is the return to power the light. The third wire should be the ground and likely will be a taped up version of the red wire.
How do I install a dimmer switch without a ground wire?
In that case, an exception in article 404.9(B) of the current National Electric Code (NEC) allows a dimmer without a connecting ground wire to still be installed if it is a replacement. Simply remove the dimmer wire, or cut it short and cap it with a wire nut.
Can I use ground as neutral?
Yes, the ground wire will function as a neutral wire and the ground wire and neutral wire are bonded together at the panelboard. Using earth or ground as neutral is neither safe nor legal.
Are dimmer switches wired differently?
Unlike standard switches, most dimmer switches have wire leads that are connected to the circuit wires with wire connectors, rather than using screw terminal connections.
What happens if I wire a dimmer switch backwards?
A light switch is a simple device with only two states, competing a circuit (On) or breaking a circuit (Off). It is a series control element is a series – parallel circuit design. A light switch has no polarization so when you reverse the connections on the light switch it works just as before you reversed the wires.
Can you put a dimmer switch on LED lights?
A standard dimmer switch cannot be used with an LED light as you will never be able to dim the LED light either completely or not very well. LED lights need their own special electronic dimmer switch to have a fully functioning and dimming light.
Do dimmer switches need special wiring?
Remember: Dimmer switches don’t work on most fluorescent fixtures, and low-voltage lighting requires special low-voltage dimmers. Remove the wires from the old switch. Dimmer switches are usually connected to the house wiring by short lengths of wire coming out of the switch body rather than by screw terminals.
Is black wire L1 or L2?
The incoming circuit wires that provide the power are referred to as the line wires. L1 (line 1) is a red wire and L2 (line 2) is a black wire. Together, they show the motor voltage. Having both an L1 and L2 indicate that the motor voltage may be 240 volts.
Is L2 live or neutral?
L1 is live and L2 is neutral.
What Colour wire is L2?
Red for L1, Yellow for L2 and Blue for common. Brown for L1, Black for L2 and Grey for common. Result is Red (brown) is permant L.
