Table of Contents
What are the 5 thermostat wires?
5 Wire Thermostat Wiring (Any HVAC Device – Air Conditioners, Heat Pumps, Furnaces, etc.) Red wire for power (24V). White wire for heating (connected to W or W1 terminal). Green wire for fans. Blue or yellow wire for cooling (connected to Y). Black wire for “C” or “Common” wire.
How do you install a 5 wire Honeywell thermostat?
What color wire goes where on a thermostat?
This is the most typical thermostat wiring style, and it applies to systems that regulate both heat and air conditioning. The wires are typically arranged as follows: red for 24-volt hot, white for heat, yellow for cooling, green for the fan, and blue for common (although the common wire may be a different color).
Can you use cat5 for thermostat wire?
Ethernet cable should work fine since thermostats use low voltage and low current. For simplicity, it’s probably easier to use each pair as if it were a single wire.
What happens if you wire a thermostat wrong?
Potential consequences of improper installation could include: Electric shock. Blowing a circuit breaker. Damaging the thermostat unit, the electrical system or even the AC/furnace unit itself.
Why is there a jumper between R and RC?
Effectively there isn’t a second RH wire, although there is an RH terminal. However, the heating still needs to be controlled, so a wire known as a jumper is connected between the RC and the RH terminals so that power gets to the heating control part of the thermostat.
Do I need a jumper from R to RC?
If you have a wire in the R terminal, and no wire in the RC terminal, use the jumper selector switch, the jumper plug, or a small jumper wire to connect the R and Rc terminals. If you have a wire in the R terminal, and another wire (not a jumper) in the RC terminal, you will not need to connect the R and RC terminals.
What color wire goes where on a Honeywell thermostat?
Meaning of Wiring Terminal Letters W (white) controls the auxiliary heating elements. Y (yellow) controls the compressor on the cooling system. G (green) controls the fan. C (blue or black) provides a return path to the transformer.
Where does blue wire go on thermostat?
The Blue or C Wire C wires or varying colors apply to every thermostat, but blue C wires belong to thermostats attached to a heat pump. Blue wires are for heat pumps. This wire connects to terminal B on your thermostat.
What does the R wire do on a thermostat?
The R wire is the power wire for your heating and cooling system. If you only have one R wire (no Rh or Rc), you can connect your R wire to either Rc or Rh on the Nest thermostat.
What is the OB wire on a thermostat?
O, B, O/B: These wires are responsible for switching the changeover valve in a heat pump system. The O wire reverses the valve from heating to cooling, and the B wire switches the valve from cooling to heating.
What are the four wires in a thermostat?
In general, the heating wire (often white), goes into the “W” port, the cooling wire (often yellow), goes into the “Y” port, the wire that sends power from the HVAC system to the thermostat (often red), goes into the “R” port, the fan wire (often green), goes into the “G” port, and the common wire (often blue), which.
Does R go to RC or RH?
Here are some general guidelines: An R wire can go into a Nest Learning Thermostat’s Rc or Rh connector. The Nest Thermostat E only has an R connector, which is typically where an R wire would go. These are not jumper wires, and you can insert the Rc wire into the Rc connector and the Rh wire into the Rh connector.
What size wire is in Cat 5?
CAT5 is currently the industry standard for network and telephone wiring. CAT5 contains four pairs of 24-gauge copper wiring and ends in a standard RJ-45 jack. This type of copper wire cabling is known as twisted pair cabling and is only recommended for a maximum distance of 100 meters or 328 feet.
Can phone wire be used for thermostat?
Phone wire would probably work fine in most millivolt situations, but some thermostat wire has decent current going through it (like 24V control loops), so – as always – why not use the right stuff. It might leak more current and not complete the circuit in long runs.the lighter wire, that is.
Does thermostat wire need to be solid?
Many newer thermostats will only accept at the thickest, 16 gauge so the ends may need to be trimmed to fit in the socket. Solid or stranded doesn’t matter.
Should my thermostat be on E or F?
The thermostat fan operation switch, labeled FUEL SWITCH in the diagram below, is factory-set in the “F” position. This is the correct setting for most systems. The “E” setting will allow the fan to turn on immediately with the heating or cooling in a system where the G terminal is connected.
Why does my thermostat have 6 wires?
If your system has six wires, it’s because it features second-stage heating, second-stage cooling or heat-pump cooling but not all three. The extra wire signals the additional function to come on. If your system has second-stage heating and cooling as well as a heat pump, then the thermostat needs eight wires, not six.
