Table of Contents
How many coats of wax are on a commercial floor?
You do not want to run out of wax before the job is finished. Most wax finishes, like our Optimal Wet Look Floor Finish will cover approximately 2,000 square feet per gallon. Each finish is different, but most recommend 4 to 5 coats.
Can you wax a floor without stripping it?
Technically, you do not have to strip the floor before you wax it. However, if you believe that there are too many coats of wax on the floor, causing the floor to become dull, then it’s best to first strip the floor before applying a new coat.
How much does it cost to strip and wax a commercial floor?
Strip and wax jobs are charged by the square foot. The price you charge your client can vary due to several factors, but the national average is 30 to 60 cents per square foot. However, some jobs can go up to 90 cents or more depending on how difficult the job is.
How long do you wait to buff a floor after waxing?
Generally, the drying time for a typical floor wax can range from half an hour to over a few hours. But the safest curing time can range between eight and seventy-two hours.
What kind of mop do you use to wax?
CLEANING WAXED FLOORS A mop with a microfiber applicator works best for this. A new layer of wax should be applied afterward, either with the same mop if you’re using a liquid wax, or with a cotton cloth if you’re using paste wax.
Can you wax over old wax on floors?
What you may do instead is put a new layer of wax over the old one. The old layer of wax has dirt and grime stuck in it, and when you put a new layer of wax over the old one, you’re encasing the dirt and grime, causing discoloration to show on the surface.
Can you wax over old wax?
A general rule is if your applying the same wax – just top it off if it hasn’t been there too long. You don’t need to clay & strip every time you apply another coat of wax – depending on how long it’s been since you did so.
Does waxing a floor make it slippery?
Hardwood floors are not naturally slippery, but can become slick after applying a coating of wax or polish, or especially if the floor’s surface is dirty. The best ways to reduce the risk of slipping on your hardwood floor is to keep it clean and dry.
How often should you wax your floors?
In general, floors should be stripped and waxed annually or every six to twelve months for heavy-traffic commercial spaces, such as restaurants or retail stores. This will help make sure your floor stays looking its best!.
Can you mix floor wax with water?
Mix a solution of one part cleaning solution to nine parts water. Pour the floor wax into the bucket and work over the surface of the floor using long, steady strokes. Apply an additional coat of wax for maximum shine and protection.
How many square feet will 5 gallons of wax cover?
This 5-gallon container covers approximately 10,000 square feet (2,000 square feet per gallon). A 1-gallon container is also available from 1877FloorGuy for your convenience.
How much should I charge to wax a floor?
Strip & Wax Floor Prices HomeWyse states that average cost to strip and wax a floor is about $174. The lowest cost you could expect to pay is about $148 while the highest cost is about $200. This cost estimate is based on a 314 sq ft room. This makes the average cost of stripping and waxing a floor at $1.80 per sq ft.
What do you need to strip and wax floors?
Equipment needed to strip & wax floors Mop heads (finish). These will be used for applying the floor finish. Stripping Pad for floor machine. 1 Dust mop. 1 broom with dustpan. 3 – 5 wet floor signs. 1 Box latex gloves. 2 Sets of goggles. 1 Box can liners.
What are white buffing pads used for?
The pad is used for spray cleaning or dry buffing soft finishes using a rotary machine (175-800 rpm). It is also used for light cleaning under an automatic scrubber. This extra fine pad has been designed for polishing clean, dry floors. White polishing pads are a perfect match when used to polish marble floors.
How do you shine a waxed floor?
Restoring the Wax Get a good pair of knee pads, because the best way to do this job is to rub off the old wax with a rag and odorless mineral spirits. Once the old wax is gone, apply a new coat with a rag; buff it with the floor buffer, and your floor will look as good as new.
Is floor polish the same as wax?
The main difference between floor wax and floor polish is that floor wax is used as a protective sealant whereas floor polish is used to shine and restore. You wouldn’t use wax to rejuvenate your wood floors; you’d use polish.
