Table of Contents
Stack a few split logs on your grate and place kindling around and below them. Make sure the damper is open before you light the kindling with newspaper. Don’t use too much paper, as flaming scraps can be carried up the flue and onto your roof. Never use gasoline, lighter fluid or a butane torch to start a fire.
How do you use a wood burning fireplace for the first time?
Ignite your first fire by using a long-handled lighter or matches to ignite the newspaper and kindling. Use a fireplace poker to stir the sticks as needed until the larger logs ignite. Do not leave a fire unattended. Ensure the fire is fully extinguished before leaving the house or retiring to bed for the night.
How do you use a Wood fireplace at home?
Steps for Lighting a Fire: Place kindling, newspaper, and logs on the fireplace grate. Open the damper. Open a window a few inches, to further help with the draft. Light a match and quickly blow it out, watching to see if the smoke goes up the chimney as it is supposed to.
What can I put in my wood burning fireplace?
Seasoned Wood. The one and only thing you should be burning in your fireplace is dry, seasoned firewood! Seasoned wood means that the wood has been left out for a long period to dry, and all moisture has been removed. Hardwoods such as maple, oak, and ash are often recommended as firewood.
Can I leave the flue open overnight?
The smoke from burning wood contains carbon monoxide, so in order to prevent this toxic byproduct from entering your home, it is important to leave the flue open overnight. This enables a draft to carry the compound out into the atmosphere, instead of sinking down the chimney and saturating the room.
When should I close the damper on my fireplace?
The damper should always be fully open before lighting a fire and when the fireplace is in use. Close it when it’s not it use. Operating the fireplace with the damper partially closed will not generate more heat. Instead, blocking the passage through the flue will result in smoke entering the home.
Why does my fireplace not heat the room?
As the cooler air is sucked into the chimney, the heavier heated air rises to the top and is vented through the chimney along with smoke, soot and other contaminants. This continuous down draft flow of cold air is causing your home to be insufficiently heated.
Does a fireplace actually heat a room?
Fireplaces won’t be able to heat a room as well as a wood stove is able to, but you’ll still feel warmth sitting nearer to an open fire. Wood burning fireplaces aren’t known for their ability to generate large amounts of heat for a room.
Can a wood fireplace heat a whole house?
Wood stoves aren’t typically designed to heat an entire house but sized to warm a particular room in a home. However, installing a wood stove in the right location in a home, along with helping to circulate air between rooms, or using a stove boiler, can help to raise temperatures across a whole house.
Do you need to open a window when using a fireplace?
Fireplaces should not be used as furnaces. Open a window when using the fireplace to prevent the room from becoming smoky. The air coming in from the window will go up the chimney. Before making a fire, open the glass doors, pull aside the screen curtains, and place the kindling, newspaper and logs inside.
How do you keep a fire going all night in a fireplace?
11 Ways To Keep A Fire Going In An Open Fireplace Ensure That The Damper Is Fully Open. Warm The Chimney. Maintain The Air Supply. Build The Fire Correctly. Only Burn Wood That Is Dry Enough. Burn Room Temperature Wood. Burn Hardwood Logs. Add A Couple of Logs At A Time.
What is the fireplace at home called?
The part of the fireplace that holds the fire is called a firebox or a firepit. There is a chimney or flue above the firebox that lets the smoke from the fire go outside. Until the early 1900s, most homes had one or more fireplaces as a source of heat for the residents of the house.
How long does wood burn in fireplace?
A fireplace burning at on high (HHV) will produce 55,000 BTUs and burn for a duration of 2.5 hours. The same fireplace burning on low (LHV) will produce 18,000 BTUs and burn for a duration of 8 hours.
How long does a wood burning fireplace last?
The average life of a wood-burning stove is 10 to 20 years.
What wood should you not burn in a fireplace?
Watch out for any wood covered with vines. Burning poison ivy, poison sumac, poison oak, or pretty much anything else with “poison” in the name releases the irritant oil urushiol into the smoke.
Can you get carbon monoxide poisoning from a wood burning fireplace?
CO is one of several products from the combustion process. It’s also the most dangerous and deadly. The direct answer to the question above is: yes. Your gas, pellet or wood burning stove, insert or fireplace will produce carbon monoxide.
How long do fireplace ashes stay hot?
Hot coals, hidden in a pile of ashes and thus well insulated, can stay hot for up to four days because the ash acts as an insulator that keeps the coals from burning out.
Is a damper the same as a flue?
A damper is located in the flue of your chimney. The flue is where the smoke escapes when the fire is going. Dampers are placed inside of the flue to help control ventilation. Your damper should have a chain or handle that you can access in order to open and close it.
Can you use a fireplace without a damper?
Does My Chimney Have a Fireplace Damper? And while older wood-burning fireplaces can function safely without a damper (gas fireplaces cannot), a chimney without a damper is just a gaping hole in the roof of your house. It’s a gateway for frigid air to enter and for heated air to escape in the winter.
Should the damper be open all the way?
When should the damper be kept open or closed? The fireplace damper should always be in the open position whenever you have a fire in the fireplace. Close the damper when the fire is extinguished. This will prevent the heated air from escaping through the chimney and will keep water and other debris out of the flue.
What is the lever for on my fireplace?
One lever opens and closes the damper, allowing the smoke to come up through the flue of the chimney, while a second lever opens and closes the air vents, allowing fresh combustion air to enter and fuel the fire.
