Table of Contents
How to use Shrink Art films Draw or trace a design on the film. Cut out the design. Pre-heat oven between 300°- 350°. Place design on cookie sheet lined with medium weight cardboard, teflon sheet, parchment paper or vellum. Heat for approximately 2-3 minutes until flat or shrinking has stopped.
How do you use shrink plastic?
Shrink plastic can be shrunk using a heat tool or by placing it in the oven. When the plastic shrinks, it curls and bends. When the shrinking process has completely finished, the piece of plastic should return to a flat shape. Occasionally the plastic may stick to itself during the shrinking process.
How long do you put shrink plastic in the oven for?
Typically, shrinky dink plastic if first colored on with permanent markers or colored pencils. Next cut out the shapes and bake at 325 degrees Fahrenheit for about 1-3 minutes. At first, the Shrinky Dinks will curl up, but then they will flatten back out. Once they flatten back out, bake for 30 more seconds.
How do you use Shrinky Dink plastic?
Place Shrinky Dinks® pieces, colored side up, on tray or cookie sheet covered with foil or brown paper. Heat at 325°F (163°C) for 1 to 3 minutes. Watch as the Shrinky Dinks® shrink. After the pieces lay flat, allow an additional 30 seconds of baking time to complete the process.
What side do you draw on shrink plastic?
Place with rough side up. Either trace or draw freehand your favourite pictures or images on to the plastic using good quality pencils or permanent markers. Do not use crayons, they may be flammable during the heating process!Nov 5, 2016.
How big should I draw on shrink plastic?
The plastic shrinks approx 45% of its original size so make sure your designs are a lot larger than the size you want them to end up being. Look at the photo at the end to see the difference in size for reference.
Does acrylic paint work on shrink plastic?
And I am here to tell you all, from the depths of my struggles with acrylic paint and shrink plastic – DO NOT USE ACRYLIC ON SHRINK PLASTIC.
How do I make sure my Shrinky Dinks don’t curl?
Remove from the oven, move the parchment to your counter or other heat-proof surface and press down on them with your oven mitt or lay something flat on them. This will help make sure they do not curl as they cool.
Why does my shrink plastic curl?
Shrink Film will curl up, then flatten back out, this is simply part of the shrinking process. Be patient while shrinking and wait for it to flatten out. If your film curls and sticks to itself, simply remove from the oven and using toothpicks or tweezers un-stick and return it to the oven.
Do you color on the rough or smooth side of Shrinky Dinks?
Shrinky Dinks are usually sold as 8-inch by 10-inch plastic sheets. Use colored pencils, markers, and ink on Shrinky Dinks. Use the colored pencil on the rough side of the sheets, and use Sharpie or permanent marker on the smooth side.
How do you transfer photos to Shrinky Dinks?
How to Print on Shrinky Dink Create images on your computer. Photo images work well. Print the images. Ink jet and bubble jet printers must be used. Cut out the images. It is not possible to cut the images after it has baked; they will be too thick. Bake the images. Preheat your oven to 350 degrees.
Can 1 plastic be used for Shrinky Dinks?
Number 1 plastic shrinks a little, but not much and also sometimes just turns white and curls – it’s not a good material for DIY shrinky dinks. The #6 plastic with the ridges has a pretty neat effect when made into a shrinky dink.
What side do I color on on shrink art?
Coloring Your Creations The rough side of the shrink art is the side receptive to ink or colored pencils. If your shrink art has no rough side, scuff up one side with a piece of fine sandpaper; then wipe off the dust with a rag or paper towel.
How do you use Shrinkles?
Follow these simple instructions for loads of fun: Line a baking tray. Place Shrinkies on the tray, coloured side up. Bake in the oven for 2 minutes — Shrinkies will curl up as they shrink before flattening out again. Use an oven mitt to remove tray from oven.
How big should I make my Shrinky Dinks?
Be sure to format with 8 1/2 X 11 inches. It is important that you use an InkJet printer as this is how the images are transferred to the paper. I use a Canon MX410 and it works wonderfully. You will need to cut your images out of the paper before cooking them.
Can you use pen on shrink plastic?
Paintigo Acrylic Paint Pens Even though these pens use acrylic paint, they dry almost as fast as ink. As mentioned earlier, these markers can effectively apply acrylic paint on shrink plastic.
Do they still sell Shrinky Dinks?
Shrinky Dinks were soon licensed to be manufactured by the major toy companies of the time such as Milton Bradley, Colorforms, Western Publishing and Skyline Toys. The shrink plastic is still available from many retailers and can be used for a variety of things like charms and pins.
What kind of paint do you use for Shrinky Dinks?
Gloss acrylic craft paint – note GLOSS is required as we tried non-gloss and the paint flaked off. Paint Brush. Scissors. Mod Podge.
Do colored pencils work on Shrinky Dinks?
Any colored pencils work great on Shrinky dink plastic. The key to getting vibrant designs with colored pencils is to lightly sand the shrink plastic to score it.
How do you seal a Sharpie Shrinky Dink?
Here’s the process in a little more detail: Step 1: Cut out and color your shrink plastic. I use a standard hole punch for the holes. Step 2: Shrink them! I have used two different methods to shrink plastic. Step 3: Seal with embossing powder. Step 4: Let cool. Step 5: Add hardware.
Can you use Sharpie on Shrinky Dinks?
Sharpies, Acrylic Paint Pens, or Colored Pencils: Our pigment of choice for Shrinky Dinks would be permanent markers (sharpies). They work well for a variety of ages and are ready to roll straight out of the package. Alternatively – matte sheets are able to be used with colored pencils.
What happens if you bake Shrinky Dinks too long?
If you get nervous about your shrinky dink curling in the oven – don’t worry! It does that and when you leave it in a little longer, it then flattens out and shrinks a little more. It doesn’t shrink past a certain point so you don’t need to worry about it being in there too long.
