Table of Contents
Compared to other hardscaping materials, installing pea gravel is relatively easy. Generally, you work the soil about 6 inches deep, remove any weeds, lay down 2 inches of coarsely textured base rock (also called crushed rock), and cover that with a 3-inch-deep layer of pea gravel.
Do you need to lay anything under pea gravel?
There are a couple of ways to create a pea gravel patio: using bare ground as a base or over a base layer of crushed stone. If you have loose or sandy soil, you’ll need a base layer. If the soil in your area is a hard clay soil, it may support the pea gravel on its own.
Can I put pea gravel directly on soil?
You can lay the pea gravel directly over grass or soil, but plants will grow up through the pea gravel. Remove the hose and dig out the marked area to a depth of approximately 2 to 3 inches for low-traffic feature areas such as mulching around pots, flower borders and areas used for display only.
How do you keep pea gravel in place?
The two most effective methods for stabilizing pea gravel are cement and permeable pavers. If you’re stabilizing pea gravel with cement, it will hold for a while until it’s eventually damaged by traffic and water exposure.
How do you use pea gravel?
Since it has a smooth finish, pea gravel is also regularly used for walkways, dog runs, playgrounds, patios, and a variety of other high-traffic areas. Like crushed stone, pea gravel can also be used for underground projects, such as drainage and pipe bedding.
What do you put around pea gravel?
First, it travels, so you’ll need to have a solid border or edging material to make sure it stays contained. Stone pavers, metal edging, or treated lumber are all great options. Without this, your pea gravel will end up spreading around the yard and causing headaches (and maybe foot-aches).
Do you put landscape fabric under pea gravel?
Due to its versatility and its high functionality, pea gravel has become a well liked landscaping tool among homeowners. Whether the gravel is an alternative to mulch or you’re building a patio, a layer of landscaping fabric should first be placed on-top of the soil to discourage the growth of weeds.
Can I put gravel directly on soil?
Gravel is a notoriously difficult material to work with and maintain, especially when it is so spread out, like with a garden path. It is because of this that the process for how to lay a gravel path on soil needs to be followed carefully, and the area properly prepared, as the following article reveals…Sep 17, 2019.
How do you use pea gravel for drainage?
Pea gravel is laid first, then your pipe. Being careful not to injure the pipe, drainlayers form a layer of larger stone on top of the pipe then finish with a layer of pea gravel. The large stone on the bottom helps give maximum drainage while the smaller pea gravel on top makes laying sod over the drain possible.
How do you put a border on pea gravel?
Pea gravel paths need an edging such as brick so the gravel does not escape into the garden or lawn. Lay out the edge of the path with a rope or hose. Remove the grass, weeds and debris from between the edges. Cut the edges of the walkway with a flat-bladed shovel.
How do you tighten pea gravel?
Take it dry and rake it in with the pea gravel , you dont want too much cement sitting on top . Take a sprinkler and wet it down , it will tighten it up , still be looser stones on top.
Can you walk barefoot on pea gravel?
Pea gravel used for a walkway provides a softer surface to walk on compared with using a larger type of gravel. Walking on pea gravel barefoot is more bearable than walking on larger rocks which some times have jagged edges that can stab at feet.
Should landscape fabric go under gravel?
Should landscape fabric go under gravel? Yes. Putting landscape fabric under gravel isn’t a requirement, but it is recommended. When used under gravel, it provides all the positives of weed control and added stability, without any of the negatives.
How deep should you lay gravel?
Decorative aggregates should be laid at a depth of 50mm. This ensures proper coverage without revealing the surface below. Laying the gravel too deep will mean you sink into the surface and it becomes difficult to walk across.
How much pea gravel do I need?
Measure the length, width and depth in feet of the area to be covered. Multiply the three numbers together. Divide by 27 to get the number of cubic yards of pea gravel needed. For example, if the area is 9 feet square and the gravel is to be a foot deep, multiply 9 by 9 by 1 to get 81.
Is pea gravel cheaper than pavers?
It is cheaper than pavers, easier to lay than flagstone, and you can usually get the job done in just a day. 2. You can walk on it barefoot without experiencing discomfort. Because pea gravel is smaller and usually rounded in shape, it is easier to walk on this product with a variety of footwear.
