QA

How To Use Kraft Blade Cameo 4

What is silhouette Kraft blade used for?

The 2mm Kraft (Craft) blade allows you to cut specialty craft materials, such as acetate, felt, craft foam, cork sheets, balsa wood, burlap, leather, and more. Recommended for use with a strong grip high tack mat.

How do you cut cardboard with Silhouette Cameo 4?

What can you cut with Kraft blade cameo 4?

The 3mm Kraft Blade for the Cameo 4 allows you to cut specialty craft materials, such as acetate, craft foam, and leather. The 3 mm depth is designed specifically to take advantage of the increased clearance the Cameo 4 has to cut even thicker materials.

How often should I change my Silhouette blade?

According to Silhouette, the average blade lifespan is about 6 months, but can vary widely by usage. The range they give as an example is that a blade could last anywhere from a few weeks to more than a year. Blade life is decreased by: frequent use.

How do you set the silhouette blade?

To adjust the blade setting, place the blade into the adjustment socket so the arrow on the socket lines up with the red line on the blade. A ratchet cap, which is included with each blade can be used also. 4. Turn the blade to the desired number.

How do you use a silhouette cameo?

Can the Cameo 4 cut wood?

The 3mm Kraft Blade for the Cameo 4 allows you to cut specialty craft materials, such as acetate, craft foam, burlap, felt, balsa wood, and leather. The 3 mm depth is designed specifically to take advantage of the increased clearance the Cameo 4 has to cut even thicker materials.

Can I cut cardboard with Silhouette?

The Silhouette is a great paper cutting machine. It’s not the best for cutting chipboard. It can do it but you need to use a thin chipboard… Step 2: If your mat isn’t sticky you might want to tape the box/chipboard down.

What is the thickest material a silhouette cameo can cut?

The Silhouette Deep Cut blade can cut materials up to 2mm thick. Those are usually reserved for the Curio, CAMEO 3, Portrait 2 and Silhouette CAMEO 4 which are the machines that have the higher clearance and therefore can cut thicker materials.

Do I need a cutting mat for cardstock?

Here are some things to remember: Before you cut, make sure you adjust your rollers to accommodate the width of your material. If you are using any previous Silhouette cutting models (Cameo 3, Portrait 2, etc.), you must use a cutting mat to cut out cardstock or other paper materials.

Can the cameo cut chipboard?

The Silhouette CAMEO® 3 has an increased clearance level (2 mm) compared to previous versions of the CAMEO. This allows you to cut thicker materials, such as craft foam, chipboard, leather and more, using the Deep-cut Blade.

What materials can you cut with Silhouette Cameo 4?

With the Rotary Blade, you can cut fabric materials like cotton fabric, felt, leather, and more. The Kraft Blade for Cameo 4 can cut materials like acetate, craft foam, and burlap. The Punch Tool punches holes in the spaces you need to weed vinyl or heat transfer, making weeding faster and easier.

Can Silhouette CAMEO cut 4 acrylic?

I get asked a lot if it’s possible to cut acrylic with Silhouette CAMEOthe short answer is no. Since the Silhouette cutting machines can’t cut actual acrylic the secret is Shrinky Dinks.

How do you use fabric in Silhouette CAMEO?

Put your fabric on your cutting mat with the right side of the fabric facing up. In the material drop-down menu of the Send panel, choose “Fabric” as your material type. Send your design to your Silhouette. Use a fabric blade to get the cleanest cut.

Does Silhouette CAMEO cut fabric?

You can cut fabric any Silhouette CAMEO or Portrait machine – including those that can’t use a Silhouette Rotary blade. In a pinch you can use almost any NEW blade to cut fabric – in any machine. Trim the fabric down to the size of the interfacing.

Why is my silhouette cameo not cutting all the way through?

The most common cause for the Silhouette CAMEO 3 not cutting or not cutting through is a problem with the blade – specifically the Autoblade. If you are using the Autoblade in your CAMEO 3 it’s important to make sure it’s loaded into the blade carriage correctly to ensure it cuts.

What do the numbers on silhouette blade mean?

Blade Number – This setting indicates the amount of blade exposed from the blade tip in 0.1 mm increments. The higher the number, the more blade that will be exposed, and therefore the deeper your cut will be. If your cuts are too deep, you can reduce the blade number and decrease the exposed blade tip.

Is the Cameo 4 Bluetooth?

The Silhouette Cameo® 4 is Bluetooth® enabled and allows for wireless communication. This way you can send designs from a Bluetooth® device to your Cameo 4 to cut without your machine being plugged in to your computer. Once Bluetooth® has been confirmed on your machine, go to the Send panel in the software.

What size vinyl can Cameo 4 cut?

The Silhouette CAMEO 4 Pro can cut rolls and sheets of material between 9″ and 24″ wide. In order to cut various size materials you simply need to move the roller along the roller bar. If you are using the roll feeder a quick adjustment allows the machine to accommodate 9″, 12″ 15″, 20″ and 24″ size vinyl rolls.

How do you cut a roll of vinyl?

Step 1) Make sure the vinyl is rolled very tightly. Using tape (I use painter’s tape), tape the roll together on both ends. Step 2) Use a permanent marker to mark where you will cut the vinyl roll. I usually purchase 15 inch rolls and cut them down to 13 inches.