Table of Contents
How do I set the temperature on my hunter thermostat?
Hold down one of the UP/DOWN arrow keys until the display flashes. Use the arrow keys to move the temperature setting to the desired temperature. Press the HOLD/RETURN button. The thermostat will now hold the temperature at the setting until the override is cancelled.
What does hold mean Hunter thermostat?
By pressing “Hold”, your thermostat will lock in the temperature it’s currently at until you change it again. When you are ready for your normal schedule to resume, simply press the “Run” button and return to your typical programming.
How do I reset my hunter 44550 thermostat?
You can reset them all at the same time using the reset button. Open the faceplate on the Hunter thermostat. Twist a paper clip so one of the ends is sticking out. Press the end of the paper clip into the “Reset” pinhole and hold it for two seconds to clear the programming.
What does AUX heat on thermostat mean?
Auxiliary heat on your thermostat refers to your backup heating system within your heat pump, otherwise known as electric resistance heating. This is because when the temperature inside your home drops below the goal temperature you’ve set the thermostat to, your thermostat energizes auxiliary heat.
How do you take a hold off a hunter thermostat?
To cancel the temporary setting, you need to press ‘Cancel’, then press ‘Hold’ in order to permanently adjust the temperature. This will override the temperature settings for all time periods. The ‘Hold’ feature turns off the program schedule and allows you to adjust the thermostat manually, as needed.
Do you turn the thermostat up or down for cold?
When you lower the temperature on your thermostat, the air conditioner turns on and begins to cool your home. However, the air conditioning can’t work any harder than that to cool your home. So, turning down your thermostat by 10 degrees won’t cool your home any faster than if you turn it down by two degrees.
Should I turn my thermostat down at night?
Turning your heat off completely can cause your home to cool down quickly. At night and when you are away, it is recommended to just turn your thermostat down 7-10 degrees lower than what you would typically have the heat set at.
What is the most common thermostat setting?
A universal guideline for a normal summer thermostat setting is 78° F. However, this condition should be set for when you’re at home during the daytime. For optimal comfort to cost ratio, your home thermostat temperature range will vary throughout the day.
Should I use the hold button on my thermostat?
The hold button on the thermostat allows you to key in the desired temperature, different from your normal programming. It will maintain this new setting until you resume your regular schedule. You can manually change the thermostat back to its normal programming whenever you get back home.
Should fan be on auto or on in winter?
The most obvious benefit to keeping the furnace fan on the “on” setting is more even heating and cooling distribution. Heat has a tendency to rise in the home during the winter due to “stack effect,” and parts of the home that see greater sun exposure may also become warmer than the rest of the house.
Should fan be on auto or on for heat?
Keeping your fan on AUTO is the most energy-efficient option. The fan only runs when the system is on and not continuously. There is better dehumidification in your home during the summer months. When your fan is set to AUTO, moisture from cold cooling coils can drip and be drained outside.
Why is my hunter thermostat not working?
If the thermostat is failing to activate the air conditioner or heating unit as desired, first be sure the selector switch is in the correct location. If you are still having problems, turn off power to the thermostat, remove its faceplate and confirm that the wires are connected to the proper terminals.
What does a flashing 3 mean on a Hunter thermostat?
A flashing 3 means the third setting is currently operating the heater or AC.
Why is the number 4 flashing on my thermostat?
If there is no power to the outdoor unit for an extended period, the YorkGuard will flash a code 4 – Low Discharge Temperature. Check the breaker for the heat pump and make sure that it is not tripped. Watch Video. If the breaker is okay, a qualified service technician should check the system.
How do I know if my auxiliary heat is on?
Just feed the electronic probe into the supply outlet. If the heat pump is off you will know it. You cannot heat a house with 55 degree air.
Can I turn off auxiliary heat?
It’s, unfortunately, not possible to manually shut off auxiliary heat. But it only turns on when your home needs warmth fast. So if you don’t let the temperature drop quickly in your house, it won’t come on. That’s why the best strategy for solving this problem is to focus on regulating the temperature in your home.
Why is my heat pump blowing cold air when the heat is on?
Your Heat Pump May Be In Defrost Mode As heat is released through the outdoor unit, it melts ice formations that would have been difficult or damaging to remove manually. Defrost mode is essentially the same as cooling mode, therefore it is likely your heat pump will blow cool air while in this mode.
What does the run button do on a thermostat?
Pressing Hold will keep your thermostat at its current temperature until you change it. Simply press the “Run” button when you are ready to return to your normal schedule.
