Table of Contents
Instructions for use: Place CSL into your fireplace or wood-stove on the hot embers. For larger fireplaces or those with excessive creosote build-up use two CSL at the same time. CSL will burn for approximately 90 minutes. Let CSL burn out completely.
How do you burn creosote logs?
The first piece of advice to anyone contemplating using a Creosote Sweeping Log is to light a wood fire first. The wood fire will heat the tar within the chimney as well as improve the draft, which is essential for the chemicals released in the burning of the CSL to be distributed well so they can do their work.
Should I use a Creosote Sweeping Log?
Many homeowners wonder if the chimney sweep logs or creosote sweeping logs really work to clean out fireplace flues and get rid of creosote residue so that the fireplaces are safe to use. The short answer is no, they don’t work.
When should you burn a creosote log?
Any time you use the chimney, creosote can build up. While it can be hard to tell, you should use a creosote sweeping log when the creosote layer is 1/8 of an inch thick. That way, you can keep it from getting too thick and progressing to a later stage.
Will a hot fire remove creosote?
Avoid Smoldering Many homeowners allow their fire to smolder until it burns itself out. As the fire begins to burn out more creosote is produced at the lower temperatures. Rather than allowing the fire to smolder, it should be extinguished.
Do potato peels clean chimneys?
Burning the potato peels will not eliminate all soot or creosote buildup, but they will reduce it. A normal and regular chimney cleaning is still needed to keep the fireplace working properly and safely.
How long does a Creosote Sweeping Log burn?
The Creosote Sweeping Log burns for approximately 90 minutes. Making a wood fire prior to using CSL will heat the tar on your chimney wall, while it improves your draft. 2. The smoke from CSL is charged with additives, which rises and attach themselves to the creosote deposits..
How long does it take for creosote to build-up?
It typically takes between six months and one year for cut wood to get to a low moisture content. Do not burn artificial packaged logs in your fireplace or your woodstove, since they leave a large amount of creosote deposits. Burn hot fires that have plenty of air.
How often should I have my chimney cleaned?
Homeowners are urged to have their chimneys inspected for creosote buildup and cleaned if necessary in the spring of each year. Chimney fires are characterized by loud cracking or popping noises and a lot of dense smoke from the flue, but often times go undetected by the homeowner.
Can you burn wood with creosote?
Creosote is a fairly unhelpful by-product created during the burning of wood. It is a flammable and corrosive substance. It builds up in the chimney, which is obviously somewhere that you don’t want anything that is likely to set on fire or corrode.
How do I know if my chimney needs cleaning?
Here are seven tell-tale signs that indicate your chimney or fireplace needs cleaning: Your fireplace smells like a campfire. Fires burn oddly. It takes more effort to get a fire going and keep it going. Smoke fills the room. The fireplace damper is black. Fireplace walls have oily marks. There’s evidence of animals.
Do creosote logs smell?
The smell is due to creosote deposits in the chimney, a natural byproduct of wood burning. The odor is usually worse in the summer when the humidity is high and the air conditioner is turned on. A good cleaning will help but usually won’t solve the problem completely.
Does burning aluminum cans help with creosote?
Heating the cans causes an increase in heat in a chimney which can help prevent creosote from building up on a clean chimney. However, aluminum oxides are very stable and do not react to high temperature. This means that there will not be much of an impact on built-up creosote.
How much is too much creosote?
“Creosote build-up, by itself or in combination with other factors, was involved in 92% of chimney fires reported in a study commissioned by the Wood Heating Alliance. A build-up of as little as 1/8 to 1/4 inch of creosote is sufficient to create a fire hazard.”.
What dissolves creosote?
Creosote is moderately soluble in water. Spraying water onto the creosote will help to remove the liquid. However, creosote is a type of oil that is never removed fully by water. Bleach and industrial cleaners will help to pull the creosote out of clothes and off of skin or other surfaces.
How do you stop a chimney fire?
6 Ways to Stop Chimney Fires Before They Start Minimize creosote build-up to prevent chimney fires. Schedule an annual chimney inspection. Clean your chimney when walls have a ⅛-inch layer of build-up. Install a chimney cap. Use safe fire starters to avoid unwanted chimney fires. Employ clean burning techniques.
At what temperature does creosote melt?
Add larger pieces of the dry firewood to the fireplace. In order to melt solid creosote efficiently and safely, a very hot fire is necessary. Creosote has a flash point of 200 degrees F.
